• Asian-Australasian Journal of Animal Sciences
• /
• 제12권1호
• /
• pp.61-67
• /
• 1999

Data from 22837 lambings of Lohi and Kajli ewes from 1962 through 1994 were used to analyse productive and reproductive traits and wool production, Overall litter size at birth averaged 1.33 being 1.45 for Lohi and 1.21 for Kajli ewes. The corresponding values at weaning were 1.23, 1.32 and 1.14, respectively. Litter size was consistently lowest for one year old, with a substantial increase at two, three and four years of ewe age and marginal increase thereafter, Ewes lambing in spring weaned 0.08 more lambs per parturition than ewes lambed in Autumn (p<0,01). Lamb birth weights were affected by ewe breed (p<0.01) and increased with ewe age. Overall lamb weaning weight (120 d) of 17993 lambs was 20.3 kg. Weaning weight was affected by breed, sire, year of birth, sex, rearing rank and weaning age (p<0.01). The highest mean weaning weight was 21.9 kg for Lohi lambs followed by Kajli lambs (18.8 kg), Lambs from Kajli ewes were 9% heavier at birth but 14% lighter at weaning. Twin born lambs were 18% lighter at birth and 13% at weaning than single born lambs. Male lambs were 3% heavier at birth and 4.5% heavier at weaning than female lambs. Overall annual mean wool production was 2,64 kg, Kajli ewes were heavier at breeding than Lohi ewes (i.e. 46.2 vs 44.8 kg). Lohi ewes being 3% less body weight produced 38% more wool and 18% more litter weaning weight than Kajli ewes, When average weight of lamb weaned per ewe weaning lambs was adjusted for ewe average metabolic body size, Lohi ewes were most efficient (i.e. arbitrary assigned value of 100) compared to Kajli ewes achieving only 83% of Lohi level.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.213-220
• /
• 2005

Penetration and health effect of fibers was related with their diameters and length. The purpose of this study is to characterize and compare the diameter and length of airborne man-made mineral fibers(MMMF) or synthetic vitreous fibers in the related industries. The average fiber length of the continuous filament glass, rock wool, refractory ceramic, and glass wool fibers production industries approximately 27, 28, 35, $50-105{\mu}m$. Airborne glass fibers were longest in all the type of MMMFs. The average diameters of airborne fibers generated from refractory ceramic, rock wool, glass wool, continuous filament glass fibers production industries were approximately 1.0, 1.6, 1.5-4 and $10{\mu}m$, respectively. The percentages of respirable fibers(<$3{\mu}m$) were 94% for RCFs, 73% for rock wool fibers, 61.0% for glass fibers, and 1.6% for filament glass fibers. The length of glass fibers were the longest in all types of fibers, and length of the others were similar. The refractory ceramic fibers were smallest in diameters and highest in fraction of respirable fibers.

• Animal Bioscience
• /
• 제35권10호
• /
• pp.1524-1534
• /
• 2022

Objective: The objective was to test if creep feeding (CF) improves the average daily gain (ADG) and weaning weight of calves submitted to temporary weaning (TW) and if the combination of CF and TW improves conception and pregnancy rates of cows. Methods: Primiparous (n = 74) and primiparous and multiparous (n = 104) cows grazing native grasslands were used in experiment 1 and 2; respectively. The experimental design was in plots divided into complete random blocks with two replications. The CF was the big plot and TW the small plot, thus four experimental groups were formed: i) -CF-TW (n = 21 and 27); ii) -CF+TW (n = 16 and 24); iii) +CF-TW (n = 20 and 26); iv) +CF+TW (n = 17 and 27) with cow-calf pairs for experiments 1 and 2; respectively. Nose plate application for TW had a duration of 14 and 15 days for experiment 1 and 2: respectively. In experiment 1, calves were fed at 1% of live weight for 112 days using a commercial supplement with 18.4% crude protein. In experiment 2, the supplementation lasted 98 days, and was carried out with corn dried distillers grains with soluble (DDGS) at 40% of the potential intake on a daily basis. Results: The TW reduced ADG during the TW period and the following 14 days, but the negative effect of TW was maintained until the final weaning only in experiment 2. The CF increased ADG during TW period in both experiments. The TW promoted an earlier conception of the dams (12 days in -CF treatment and 19 days in +CF treatment, p<0.01) and CF increased pregnancy rate in experiment 1, being the effects not consistent between experiments. Conclusion: The CF consistently promoted an increase in ADG during the period of TW and increased final weaning weight of calves, therefore it is economically viable.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.853-856
• /
• 2006

It is known that cement production not only consumes large amount of energy but also contributes substantially to the green house gas emission. Therefore, there is a demand to develope a new technology to produce energy efficient and environmental conscious cements. The most recent, wood wool ceramic board is being applied in various building material field, for example thermal insulating and acoustic absorption material. This paper focused on improvement of the physical properties for wood wool ceramic board applied inorganic polymer binder. As the result of this experiment, what we could obtain better wood wool ceramic board's properties such as density, water contests, water resistance and band strength, was 0.46, $10{\sim}12%$, 1.9% and $40kgf/cm^2$. This result can be applicable to commercial wood wool ceramic board.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권3호
• /
• pp.204-205
• /
• 1989

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.595-599
• /
• 2000

Fine wool sheep (n=18) maintained in a tropical environment were allocated to three treatment groups. Estrus was induced with two injections of $PGF_{2{\alpha}}$ (10 mg. im) at 10 days interval. Superovulation treatment started 2 days prior to the second injection of $PGF_{2{\alpha}}$. Each ewe was treated with a total dose of 25 units FSH (Super-OV) i.m. every 12 hover 3 days; Group 2 were also injected i.m. with 200 IU PMSG at the first injection of FSH; Group 3 was treated as in Group 2 and also with GnRH ($4{\mu}g$ Buserelin) at the onset of estrus. The ewes in estrus were mated with a fertile ram. Ovarian examination and recovery of embryo and ova were performed at laparoscopy and laparotomy on day 3 or 4 after mating. Data for onset of estrus, duration of estrus, number of corpora lutea (CL), number of unnovulated large follicle (LF), embryo recovery rate, embryo quality and fertilization recorded for the 3 groups. Ewes in the Group 1 set in estrus later (p<0.05; $50.0{\pm}7.29h$) than the ewes in Group 2 ($24.5{\pm}3.58$) and 3 ($32.5{\pm}3.58h$). The duration of estrus, ovarian size and ovarian response (number of CL and LF) did not differ significantly (p>0.05) among the 3 groups. The proportion of ewes with a superovulatory response (${\geq}2$ CL) was the lowest (50%) in Group 1 treated with FSH alone but ova/embryo recovery (100%) and fertilization (100%) was significantly (p<0.05) higher than Group 2 (58.3 and 85.7%, respectively) and Group 3 (48.6 and 50%, respectively). It is concluded that in tropical fine wool sheep, there is no difference in the 3 treatments for yield of good quality embryos but ovarian response and ovulation rate increased on additional use of PMSG and GnRH respectively to FSH alone.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.625-628
• /
• 2006

It is known that cement production not only consumes large amount of energy but also contributes substantially to the green house gas emission. Therefore, there is a demand to develope a new technology to produce energy efficient and environmental conscious cements. The most recent, wood wool ceramic board is being applied in various building material field, for example thermal insulating and acoustic absorption material. This paper focused on improvement of alumino-silicate binder's physical properties for wood wool ceramic board. As the result of this experiment, what we could obtain best fitted alumino-silicate binder's properties such as initial setting time, flow and compressive strength of 3 days aged, was 58min, 110% and 66.0Mpa. This result can be applicable to commercial wood wool ceramic board.

• 패션비즈니스
• /
• 제10권3호
• /
• pp.23-30
• /
• 2006

Various high-touch textile products have been developed recently including ultra-fine denier filament yarn fabrics. The touch or hand of high value-added products is of prime importance. Physical and mechanical properties of fabric specimens, ultra-fine denier filament yarn fabric specimen, 100% wool fabric and wool/polyester 50:50 fabric,were measured using the KES. Compressibility of the ultra-fine denier fabric is recommendable, possibly due to the good bulk property of the specimen. Overall, the THV of the ultra-fine denier fabric is positioned between those of the 100% wool fabric and wool/polyester 50:50 fabric. Observed differences in the physical and mechanical properties explain the fabric specimen characteristics reasonably.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권1호
• /
• pp.26-33
• /
• 2002

In order to assess the effect of feeding raw or processed cotton (Gossypium) seed meal (CSM) on meat and wool production, 30 male crossbred lambs (3-4 months) of uniform body weight were assigned equally to five dietary treatments in a completely randomised design. The CSM was processed by three different methods i.e., cooking the meal at $100^{\circ}C$ for 45 minutes, treatment with 1% calcium hydroxide ($Ca(OH)_2$) for 24 h and iron treatment in the ratio of 1 part free gossypol (FG) to 0.3 parts of iron for 30 minutes. The lambs were fed isonitrogenous and isocaloric concentrate mixtures, containing 30% deoiled peanut meal (reference diet) and 40% of either raw, cooked, $Ca(OH)_2$ or iron treated CSM for 180 days. The raw and variously processed CSM replaced about 50% nitrogen of reference concentrate mixture. The concentrate mixtures were fed to meet 80% of the protein requirements (NRC, 1985) along with ad libitum chopped maize (Zea mays) hay. The slaughter weight, empty body weight and carcass weight was higher ($p{\leq}0.01$) in lambs fed cooked CSM incorporated diets, compared to diets containing deoiled peanut meal (DPNM). These parameters were not influenced by feeding diets containing either raw, $Ca(OH)_2$ or iron treated CSM in comparison DPNM diets. The carcass length, loin eye area and edible and inedible portion of carcass and the meat: bone ratio in whole carcass were also not affected by feeding CSM based diets. Among various primal cuts, the yield of legs was lower ($p{\leq}0.05$) from raw CSM fed lambs in comparison to DPNM fed lambs. The fat content in the Longissimus dorsi muscle was reduced ($p{\leq}0.05$) in lambs fed processed CSM based diets compared to those fed DPNM diet. Replacing DPNM with either raw or processed CSM based diets did not influence the sensory attributes and overall acceptability of meat. The wool yield was higher ($p{\leq}0.05$) in iron treated CSM fed lambs. The fibre length and fibre diameter were comparable among lambs on various dietary regimes. Among lambs fed variously processed CSM diets, the feed cost per kg of edible meat production was lower ($p{\leq}0.05$) on $Ca(OH)_2$ treated CSM, followed by cooked CSM diet and then on raw CSM based diets compared to DPNM diet. The CSM after 1% $Ca(OH)_2$ treatment or cooking for 45 minutes appears to be a satisfactory protein supplement in lamb diets for meat and wool production to replace at least 50% nitrogen of scarce and costly peanut meal.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권3호
• /
• pp.186-191
• /
• 2005

In this study, a microorganism-produced protease was used to improve the quality of fabrics. First, the protease-producing bacteria were isolated from soils, and one of them was selected and identified as Bacillus sp. SJ-121. The optimal medium composition for its growth and protease production was determined to be as follows: glucose 1g/L, soybean meal 0.5g/L, soy peptone 0.5, $K_2HPO_4\;0.2,\;MgSO_4\cdot7H_2O\; 0.002,\;NaCl\;0.002,\;and\;Na_2CO_3g/L$. Also, the optimal temperature for the production of the protease by Bacillus sp. SJ-121 was about $40^{\circ}C$ at pH 7. The wool and silk were treated with the protease from Bacillus sp. SJ-121. Following the protease treatment, changes in the surface of a single yarn of the fabrics were observed by both an optical microscope and a scanning electron microscope (SEM). Changes in the K/S value of the wool and silk were measured by spectrophotometric analysis, in order to determine the amount of dye uptake in the fabrics. We also performed a tensile strength examination in order to determine the degree and nature of mechanical changes in single yarns of the wool and silk fabrics. By increasing the protease treatment time to 48 h, the dyeing characteristics of the fabrics were enhanced, and the surfaces of the single yarns of the fabrics became smoother, due to the removal of soil and scale in them. However, no mechanical changes were detected in the fabrics. Therefore, we suggest that proper treatment of the protease produced by Bacillus sp. can improve the quality of silk and wool.