• 건축역사연구
• /
• 제15권2호
• /
• pp.55-76
• /
• 2006

History of architecture technology is the area where further studies are the most needed in Korean architecture history. This present study deals with architectural tools and woodworking of Baekje as a first step in exploration of Korean architecture technology history especially, that of Baekje dynasty. Based on the study of real artifacts and archeological sites showing the trace of tool use, function and forms of architectural tools were classified, characteristics of tools investigated, and woodworking technology analyzed. The main tools of analysis include Square, Black Inkpot, Hatchet, Saw, Chisel, Wood Hammer, Axe, and Plane. It is assumed that architectural technology during Baekje dynasty might have leapt into the new stage thanks to the regular use of iron tools. Compared to those of previous eras, iron tools of Baekje are more elaboratedly-designed and well-defined in function. In addition, wooden architectural tools from Baekje demonstrate the superiority of its woodworking technology Historical record also shows the fact that craftsman from Baekje participated in construction of temples of Shilla and Japan. Precise assessment of Baeje architecture technology is difficult because no Baekje wooden architecture is still remaining. The facts mentioned above, however, surely prove the excellence of architecture technology of Baekje.

• 농업과학연구
• /
• 제39권2호
• /
• pp.189-194
• /
• 2012

It is well-known fact that woodworking activity could contribute in enhancing creativity, scientific problem-solving ability, spatial perception ability and prosocial behavior of children. However, there is little chance that children experience woodworking at home or in kindergarten. This study was conducted to know how much children and adults have done woodworking in there daily life and how they perceived children's woodworking activity. Woodworking activities for children (N=207, 5 and 6 year old kids) with adults (N=271, only fathers) were carried out in 10 kindergartens of Cheongju. Actually, the survey result shows that very few children and adults experienced woodworking in their daily life. 62.8% of children and 34.3% of adults surveyed responded that they had never done woodworking. However, the greater part of children and adults evaluated the woodworking activity positively. Over 95% of children surveyed responded that their woodworking activity was fun and they want to play woodworking again. Over 73% of adults surveyed responded that children's woodworking activity was safe, and over 99% of adults surveyed responded that they can recommend children's woodworking activity to others. In conclusion, the development of safe tools and programs for children's woodworking activity helps its spread and activation.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.253-261
• /
• 2009

school. This study was carried out by literature review. Values of woodworking in extrinsic viewpoint were justified as well-balanced development between left brain and right brain, effective improvement of creative problem solving skill, formation of affirmative attitude toward woodworking, and obtaining method to use tools and equipment effectively. Values of woodworking in intrinsic viewpoint were justified as students' instinct liking of woodworking, psychological stability, and implanting self-confidence in students. In addition to these, woodworking has more educational values. Such values should be justified in the following studies.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.403-410
• /
• 2008

This study is a background for developed woodworking educational program. To achieve the propose of this research, related to handwork to figure out the concept, changes and characteristics of handwork and the products of handwork. The areas of woodworking needs basic hand function of gripping and hooking, strong hands and stability of hand operation. Activities of this area can enhance the ability of controlling the strength of hand and the stability of hand operation. The use of both hands in woodworking promotes the coordination of both hands and handling ability. In the woodworking, diverse functions of hands are used with various tools. Each hand may be move differently, and the hand operation is elaborated. These features of woodworking help growing coordinations and hand function, and developing brain and creativeness.

• 건축역사연구
• /
• 제20권3호
• /
• pp.23-38
• /
• 2011

The Axes and Adzes are the oldest tools since the beginning of human history which is used to cut the tree and make part of architecture such as boards, square timber etc. Nowadays, these old woodworking tools especially "Jagui(자귀)" (adze) has been almost disappeared at the working site of residential and cultural properties. It is necessary to study Korean traditional woodworking tools to keep Korean traditional skill and technology. It has been reviewed the change of shape of "Jagui(자귀)" (adze) from before Samhan (삼한) period to Joseon Dynasty through excavated relics and paintings and summarize as follows: Based on excavation relics of Dahori, both plate type blade and pocket type blade are used for "Tokki(도끼)" (axe) and "Jagui(자귀)" (adze). The excavated "Jagui(자귀)" (adze) from Jeongbaikri 356 tomb, near Pyongyang is prototype of "Jagui(자귀)" (adze) used nowdays which has almost same shape as well as the insert method of blade and handle. The auxiliary handle is inserted to blade and the main handle is inserted to the auxiliary handle which is different from the method of Chinese and Japanese "Jagui(자귀)" (adze). The length of handle of "Jagui(자귀)" (adze) until late Joseon Dynasty is short by which we assume it is used for a sitting position as hand held Jagui and from that time long handle has been introduced for a standing position which is called "Sunjagui(선자귀)". "Jagui(자귀)" (adze) has been used since the beginning of human history but it is almost disappeared at the most of woodworking site which is the crisis of Korean traditional architecture and we have to do something to keep it.

• 한국가구학회지
• /
• 제19권6호
• /
• pp.487-497
• /
• 2008

This study was the research of the satisfaction of participation in short DIY Woodworking program organized by university as productive leisure activity. It is the study of what satisfactions-factors of the participants are and how the satisfaction is continued with activities of the participants later on, and finally how the satisfaction influences the choice of leisure activity further. Questionnaire is consist of total 41 survey standards like the article for facility, education, service and cost & the demographic contents of the participants. It was executed by the participants in program at sight from Aug. $1^{st}$ and $2^{nd}$ 2008, and the valid samples 156 copies were definitely analyzed. The result of analysis shows first that the majority of the participants in the short leisure program are the beginner who took part in such program for the first time. What them interests are the convenient facility & use of tools. Second, the reasonable fees in terms of material cost & preparation of personal tools influenced positively on satisfaction of participation. Third, the dissatisfaction of participants regarding educational method and service could be solved by that the trainer who makes practical lesson had been informed of the course in advance.

• Journal of the Korean Wood Science and Technology
• /
• 제52권3호
• /
• pp.276-288
• /
• 2024

This study was conducted to reproduce the woodworking process of Baekje wooden storage facilities. Green timber of Quercus spp. was processed using ancient woodworking tools, and the tool-trace formed in this process were compared with the tool-trace of actual excavated artifacts. In the tool-trace analysis, the length and shape of the tool-trace were objectively recorded using a 3D Scan, and that were difficult to confirm with photograph were confirmed through stereoscopic microscope. As a result, there were two types of adze's tool-trace. One of them is minute straight Blade-top trace line when trimming the wood surface and the other is Plucked trace that appear when strongly chop at the wood. When a chisel bat was not used, a long and wide continuous shape blade trace was produced. And when the chisel head was struck with the chisel bat, a straight blade-top trace was regularly observed. Saw-trace was identified in several layers with fine straight stripes. Through this, it was found that the tool-trace of the woodworking tools, which is estimated to have been used in each process, and the tool-trace remaining in the Baekje wooden storage facility coincide.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.5-7
• /
• 2012

Repeated using carpentry workers work at working tools because of occupational low back pain, such as musculoskeletal disorders, occupational diseases are on the rise. For this purpose, through the analysis of musculoskeletal disorders and work tools and studies are underway to improve the working conditions of the workers. However, existing previous studies may not reflect the working tools used for carpentry worker dies when working at a construction site that Therefore, in this study, the work in the form of construction, one of the jobs of worker dies classified according to the working tools of musculoskeletal disorders correlated to analyze. The results of this study are as follows. working tools of a total of seven different dies used in the installation process. Musculoskeletal disorders, waist / drill such correlation was very strong. Also showed that a total of three of the tools used in the formwork dismantling cutter musculoskeletal disorders of the arm / elbow and a very strong correlation.

• Advances in materials Research
• /
• 제1권2호
• /
• pp.129-146
• /
• 2012

Polycrystalline diamond is an ideal material for parts with micro-holes and has been widely used as dies and cutting tools in automotive, aerospace and woodworking industries due to its superior wear and corrosion resistance. In this research paper, the modeling and simultaneous optimization of multiple performance characteristics such as material removal rate and surface roughness of polycrystalline diamond (PCD) with ultrasonic machining process has been presented. The fuzzy logic and taguchi's quality loss function has been used. In recent years, fuzzy logic has been used in manufacturing engineering for modeling and monitoring. Also the effect of controllable machining parameters like type of abrasive slurry, their size and concentration, nature of tool material and the power rating of the machine has been determined by applying the single objective and multi-objective optimization techniques. The analysis of results has been done using the MATLAB 7.5 software and results obtained are validated by conducting the confirmation experiments. The results show the considerable improvement in S/N ratio as compared to initial cutting conditions. The surface roughness of machined surface has been measured by using the Perthometer (M4Pi, Mahr Germany).

• 한국가구학회지
• /
• 제28권1호
• /
• pp.1-15
• /
• 2017

Even though, a quality of the daily goods and furniture are improving as increasing living standard, the neglected people have been left behind as ever. However, tools and furniture of everyday life a certain class that are alienated are left to the inconvenience of everyday life such as the difficulty of purchase route or incongruity with the surround living space. The design that can solve this problem is the inclusive design. When we look closely the previous researches on the inclusive design, we can find that researches on public facilities and industrial products are actively carried out based on the principles and features of the inclusive design, but studies in the field of furniture design are very insufficient. In this paper, we try to study the furniture design incorporating the inclusive design and to include specific stratum without alienating it. The research method is centered on product case analysis and suggested furniture design that 'everyone can use together'. This helps designs in realizing their social values by giving everyone the right to live an equal life.