• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.135-143
• /
• 2021

Conservation treatment that involved filling the lifting parts of wooden cultural heritage is carried out by obtaining wood or wood powder of the same species and mixing it with synthetic resin or natural glue to charge the blank area. Various concentrations and mixing ratios of adhesives and additives are used, depending on the type and condition of the target. Accordingly, in this study, we determined the conditions of the filler suitable for conservation treatment of wooden sculptures with lifted or separated bark in the National Museum of Modern and Contemporary Art. The optimal filler conditions for each adhesive were selected based on drying speed, shrinkage and expansion rates, and physical deformation degree. Then, to verify their actual applicability, these fillers were applied to wood and exposed to high-humidity environment and their cross-sections were observed. The fillers showed stable application in the following order: animal glue, PVAc adhesive, acrylic adhesive. In conclusion, a 1:2 mixture of animal glue and wood powder is a suitable filler for conservation treatment of wooden sculpture with lifted bark. The results of this study suggest appropriate ways to stabilize the bark that was lifted or separated from a wooden sculpture, thus enabling the future conservation treatment of the artworks under similar conditions.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.466-474
• /
• 2008

We suggest layered sculpture method and color painting method with new materials for the preparation of various expressions for aesthetic model of the furniture and interior articles made of river birch. Through the analysis of the layered sculpture method and preference, we try to set a new direction for the enhancement of the decoration for the furniture or article design made of birch plywood. Also, we study the fittest manufacturing process after selecting color painting materials different from the existing painting method and goes well with the furniture or article made of river birch. Color painting which systemic application of the layered plywood from birch and new paints such as Oriental dye is one of the best schemes to realize various possibility of the furniture and wooden article made of the layered plywood, and this research result has affected positive effect on the development fields such as wooden furniture and interior articles.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.99
• /
• pp.10-29
• /
• 2021

This paper is an introductory study of the wooden Buddha images excavated in the Mekong Delta in present-day southern Vietnam. Approximately thirty examples of wooden Buddha images have been recovered in the Mekong Delta. As they were found among the major historic sites of Funan (the first kingdom in Southeast Asia), including Oc Eo, and likely date to the sixth century, they can be regarded as the works of Funan. Similarly to stone Buddha images, these wooden examples are considered important for their demonstration of aspects of early Buddhist sculpture in Southeast Asia. Most of these Funan wooden Buddha images are presumed to have been produced around the sixth century based on radiocarbon dating and their stylistic characteristics. This paper analyzed the iconography and style of eight examples whose forms are relatively recognizable. The eight images can be divided into four types according to their postures, dress styles, and hand gestures. They all share features of the Sarnath style of the Gupta period in India as seen in their slender bodies and the outer robe that clings to the body. However, some display a South Indian style of Buddha images in their upright posture, style of wearing a monastic robe with the right shoulder exposed, and making the vitarka mudra (preaching gesture) that is often seen in Sri Lankan Buddha images. This suggests that Buddhist sculptors in Funan devised a new style by incorporating the principal styles of Indian Buddhist sculpture. Another notable feature of these Funan images is their material, namely, wood. While none of the contemporaneous Hindu sculptures discovered from the same historic sites are made of wood, numerous Buddhist sculptures are. This paper postulates that the use of wood in Buddhist sculptures was promoted for reasons beyond ease of carving. According to the Buddhist literature, the first-ever Buddha image was the so-called 'Udayana image' made out of sandalwood. This image and its story was well-known in the Southern Dynasty of China around the sixth century. Interestingly, some auspicious sandalwood images of the Buddha was believed to have been brought into the Southern Dynasty from Funan. This suggests the possibility that the legend of the Udayana image might have been known in Funan as well and resulted in the production of wooden sculptures there.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.142-143
• /
• 2020

A study was conducted on the production of LEFC using the Precast method, not the on-site construction. LEFC, Light Emotion Friendly Concrete, has the advantage of plastic rods being inserted to allow light to transmit, but because of the lack of adhesion to concrete, it leads to a decline in mechanical performance and durability. Therefore, it is necessary to apply precasting techniques to ensure homogeneous and superior quality of LEFC. In this study, wooden molds were used and plastic rods were arranged on porous acrylic plates. Prototyping was carried out with a UHPC mix proportioning to ensure flowability, self-consolidating performance and mechanical performance.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.72-82
• /
• 2010

The objective of this study is to identify the species of 17 wooden Buddhist statues of the late Joseon Dynasty (the 17th and 18th century) in Jeollado, southwestern region of Korea. The bodies of statues were made of Ginkgo (Gingko biloba L.: 88%) and alder (Alnus spp.: 12%). The hands of statues were alder(64%), willow (Salix spp.: 27%) and Ginkgo(9%). The bottoms of hollow bodies were covered all with Japanese red-pine (Pinus densiflora S. et Z., 'sonamu') panels. The main species of statue body, Ginkgo tree was known to be introduced to Korea from China with Buddhism. The results indicated that Ginkgo trees of Korea in the 17th century had already become large and rich enough to be used for most of statues. Ginkgo wood has low shrinkage and even texture, which are crucial for carving sculptures. Alder and willow woods used for statue hands have fine and firm textures. The pedestals for these statues were also made of red pine wood. Red pine woods have rather high shrinkage and low hardness, but it is versatile woods strong enough to support heavy statues.

• Journal of architectural history
• /
• v.8 no.3 s.20
• /
• pp.23-38
• /
• 1999

The purpose of this study is to analogize the appearance of Korean Ancient Architecture in view of the Stone Remains from 3 Kingdom Period to Unificated Shilla Period. But in these period, there is no building remains but some stupas and fine arts. Especially, there are many architectural appearance and revealing signature in these Historical Stone remains. Architectural elements which are analogized by stone remains what has value as historical materials by preservation of original form from 3 Kingdom Preiod to Unificated Shilla Period are as follows : 1) Platform, the representative characteristic of Korean traditional architecture, was frame structure and accumulate structure. And circular or square footing stood a same shape column on it is put on the platform. 2) In the case of column, there used entasis column and inclined column and circular chamfer technique was applied on the top side of it. Upper side of column, capital and head pentrating tie that small bearing block was put on the center of it was joined. And longitu야nal rest(長舌) supported a cross beam. Capital and small bearing block had no bottom heel, and heel side was curved and straight. Centered bracket structure was often used, and multi bracket structure is not used yet. Inward incline technique was used. 3) Inward opening pair door which had lintel, threshold, doorjamb was usually used, Fixing stone was used for structural safety, and circular handle and lock was used for decoration. Handrail was used on the edge of wooden floor for decorative effect and safety. 4) Square rafter and circular rafter were used in the same period and so did flying rafter. Double eaves and single eave were used in the same period but, single eave was usually used. In this period, square rafter was usually used. This would be studied more by comparing with Japanese wooden architecture. 5) Hipped roof was used and half-hipped roof was not used yet. In front of th hip, there are small sculpture called Jap-Sang(雜像), and windbell was hang on the end of the hip rafter. Concave roof tile, convex roof tile, round eaver tile, decorative tile at end of roof ridge were used. Lotus style was well used on the face of roof tile for decoration. From the results of this study, wooden architecture of Unificated Shilla period was simple compare to Koryo dynasty and Chosun dynasty but, it had some brilliant character. It was hard work that analogized the form of non-existent wood architecture of Ancient Korean period by restricted stone remains. But, in addition to the results of this study and research of old documentations, more study should be go on.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.164-179
• /
• 2014

The Buddhas of the Three Words in a form of arranging Bhaiṣajyaguru and $Amit{\bar{a}}bha$ at its side based on ${\acute{S}}{\bar{a}}kyamuni$ at the center is enshrined in Daeungbojeon Hall of Daeheungsa Temple located at Haenam. So far, this Buddhas of the Three Words has been known as a wooden Buddha statue. However, as a result of X-ray screening, in left/right Buddha statues excepting main Buddha, wood and molding clay layer were observed at the same time. Therefore, this study intended to observe its internal structure, grafting method and to clarify making technique of Buddha statue during Joseon era based on image information being obtained through X-ray screening of The Buddhas of the Three Words of Daeheungsa Temple. As its result, it was revealed that form of ${\acute{S}}{\bar{a}}kyamuni$ was completed by mainly grafting 5 pieces of timber and this statue shows a typical wood grafted Buddha statue during Joseon era. Form of Bhaiṣajyaguru and $Amit{\bar{a}}bha$ were completed based on molding technique by applying clay on sculpture similar to its appearance after sculpturing more than 10 pieces of timber through its grafting. In other words, internal timber is considered to play a role of its core and grafting method of timber is more close to a technique of molding Buddha statue than to that of wooden Buddha statue during Joseon era. However, clay was directly applied on timber thinly, not applying clay thickly on it after winding straw rope on wooden core and its characteristic is that its facial area was completely composed of wooden construction only. Therefore, it is hard to rule out a possibility that the original sculpturing intention of an artist might be a wooden Buddha statue but in view of the fact that a word, 'molding' was used in a record of relics buried in statue, it could be seen that this Buddha statue might have been recognized as a molding statue at the time when creation of this statue was completed. It is considered that number of case of making statue based on this technique would be more increased when more results of X-ray screening should be accumulated and if more data should be collected, it would provide a significant evidence for identifying chronological, regional aspects of making technique of Buddha statue.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.98
• /
• pp.130-153
• /
• 2020

Using stylistic analysis and historical documents, this paper examines the production details of images enshrined in Myeongbujeon (Hall of the Underworld) at Magoksa Temple in Gongju, focusing on the wooden seated Ksitigarbha Bodhisattva and the stone Ten Kings of Hell. Inside Myeongbujeon, the wooden seated Ksitigarbha Bodhisattva is placed at the center, flanked by standing images of Mudokgwiwang and Domyeong-jonja, with images of the Ten Kings and their attendants along the walls. All of these images were transferred to Magoksa Temple in the latter half of the 1930s. The wooden seated Ksitigarbha Bodhisattva came from Jeonghyesa Temple in Cheongyang, the other sculptures came from Sinheungsa Temple in Imsil, and a painting of the Ten Kings came from Jeongtosa Temple in Nonsan. The wooden seated Ksitigarbha Bodhisattva is known to have been produced in 1677, around the same time as the stone sculptures of the Ten Kings. A close analysis of the details of the bodhisattva sculpture-including the facial features, body proportions, and drapery characteristics-strongly suggests that it was produced in the 1620s or 1630s by the monk sculptor Suyeon (who was active in the early half of the seventeenth century) or his disciples. In particular, the rendering of the drapery on the lower half of the body closely resembles Buddhist sculptures produced by Suyeon that are now enshrined at Bongseosa Temple in Seocheon (produced in 1619) and at Sungnimsa Temple in Iksan (produced at Bocheonsa Temple in Okgu in 1634). According to the votive inscription, the stone sculptures of the Ten Kings and their attendants were produced in 1677 under the supervision of the monk sculptor Seongil. However, these are the only known Buddhist images produced under Seongil, and no details about other monks involved in the production have ever been found, making it difficult to speculate about their lineage. Historical records do suggest that Seongil worked on other projects to produce or repair sculptures with disciples of the monk sculptors Hyehi or Unhye, indicating amicable relations between the two groups. Unlike most such images in the Honam or Yeongseo regions, the Ten Kings at Magoksa Temple are made from stone, rather than wood or clay. Also, the overall form and the drapery conform to statues of the Ten Kings that were popularly produced in the Yeongnam region. Thus, the images are believed to be the work of monks who were primarily active in Yeongnam, rather than Honam. In the future, a systematic investigation of wooden seated Ksitigarbha Bodhisattva images and stone Ten Kings of Hell images produced in the Chungnam region could illuminate more details about the production of the images at Magoksa Temple, and perhaps shed light on the conditions that led to the production of stone Buddhist sculptures in the Honam area during the late seventeenth century.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.535-548
• /
• 2016

Hanging paintings are used for special ceremonies in Buddhist temple. They are stored in special storage box called "Gwaebulgwae" which means storage box for a hanging painting. Studies regarding pigments, background fibers and textiles of hanging paintings are carried out with many data in the field of conservation science. However, there are only few studies for the axes of hanging paintings and storage boxes. In this study, species identification for wooden axes of hanging paintings and storage boxes from the Joseon dynasty are carried out. Hanging painting of Beopjusa temple, Magoksa temple, Sudeoksa temple, Gaeamsa temple, Sudosa temple, Bukjangsa temple, Dorimsa temple, Tongdosa temple and Daeryeonsa temple are selected. Sampling is carried out from the axes of hanging paintings and storage boxes. 81 samples are collected from hanging paintings and storage boxes. As a result, 51 hard pines of Pinus spp., 8 Tilia spp., 6 Juniperus spp., 5 soft pines of Pinus spp., 4 Tsuga spp., 3 Pseudotsuga spp., 2 Berchemia spp., 1 Pyrus spp., 1 Bambusoideae are identified. Tsuga spp. and Pseudotsuga spp. might be used in conservation and restoration works in modern times because those species do not naturally grow in Korea. Most hanging paintings and storage boxes are made of hard pine. Also, some of are made of Tilia spp., because it represents the symbol of Buddha. Some unique kinds of trees used for wooden sculpture are identified, such as Juniperus spp. and Berchemia spp. Authentic conservation and restoration works could be carried out with this data-base.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.516-524
• /
• 2021

The 'artist's intention' plays an important role in the conservation process of contemporary art. Accordingly, the information on artworks owned by the artist, their bereaved family members, and foundations that have decision-making power is important. The artist's interview is the kind of data that can clear 'artist's intentions' to ensure reliable conservation treatment can be carried out even after the artist's death. Therefore, this study attempted to use information from the artist's interview on the type of wood in the manufacture of the filler required for lifted and separated bark conditions in the conservation process of wooden artwork in the National Museum of Modern and Contemporary Art. While the conservation treatment resulted in the stable preservation of the bark of artwork, an analysis of the wood confirmed that the information in the artist's interview was not true. Consequently, we suggest that attention must be paid toward the information provided by artist, their bereaved families, etc. Based on the result of this study, this is also expected to help preserve upcoming artworks with similar bark conditions.