• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.15-24
• /
• 2022

In this research, the case of modern wooden structures since 1950 with span of 30m or more was investigated and analyzed the construction status and structural planning characteristics of wooden large space architecture. As a result, wooden large space buildings have built around Asia, North America, and Europe, in which cases of ice skating stadiums with span of 30m to 60m were concentrated. In the case of baseball parks and football stadiums, even a span of about 165m was built in a wooden structure. In addition, it was found that the structural systems used in wooden large space structures were a funicular arch and truss structure, in that cases, funicular arch system consisting of radial arrangements was used in the examples exceeded 150m and the two way truss system was also used in long span wooden structures exceeding 100m. As the truss structure with a tie-rod or the flexure+tension structure was partially investigated, it can be seen that various timber structural systems need to be devised and researched. Also, It was investigated that a technique in which some members of the truss are made of steel or a composite member of steel and timber is also possible to develop

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.1
• /
• pp.19-28
• /
• 2016

This research aimed to suggest a standard design that reflects Hanok design tendency, and present a selective design that can fulfill a building owner's intention beyond the simple function of building permit or report. In addition, this research attempted to become a standard by establishing a criterion in calculating the measurements of section design or primary framework members, in order to be a guideline for designing Hanok in different sizes and forms. The results are as follows. The building area of Hanok standard design was set to be below $85m^2$, with a straight type of $83.16m^2$ and an L-shape of $84.24m^2$. By dividing the plane into a straight type and L-shape, two straight types were suggested: 'general type' and 'large living room type.' The upper floor space, along with the main room and small room, was proposed as an option to be changed into a room where an underfloor heating is installed depending on the building owner's intention. In addition, a criterion for side design and calculation of framework measurements was suggested and applied, while a five-girder design without high pillars was suggested for material-assembling structure. Two types of pillars-circumference and square cylinder-were proposed for the building owner to choose from, and a pointed beam house and ikgong(orthogonally-projected bracket) house were suggested for pojak bracket structure so either of them could be chosen according to the building owner's taste and economic condition. Finally, the sectional size of main materials were divided according to the form of pojak bracket structure to be proposed.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.86-109
• /
• 2009

Mireuksa Temple was founded during the reign of King Mu of Baekje(AD 600-641). The circumstance of the construction of this temple is documented in "Memorabilia of the Three Kingdoms (Samgukyusa)". The pagoda named stone pagoda at Mireuksaji temple stands outside the main sanctuary of the western area. The south and west sides of the stone pagoda have completely collapsed, leaving only the eastern facade of six of its levels intact. Through the recent discovery of sarira reliquary we can see that the erection of this pagoda was in 639. So owing to accumulation of excavation results about Baekje temple site and vigorous academic exchange, it is possible that architecture of western pagoda at Mireuksaji temple can be understood in connection with the architectural development of wooden pagoda from 6th to early 7th century in East Asia. So this study is on the consideration of building of this pagoda putting first structure of upper part and cross-shaped space in 1st floor. It was considered that the material characteristics as stone could be applied to the temple pagoda architecture of large scale. The results are as follows. First, it had been built in recognition that the outer and inner part of pagoda should be separated. As it is the expression of structural system in temple pagoda architecture of large scale at that time. In pagoda there was a self-erected structure and the members of outer part of it were constructed additionally. Second, in Mireuksaji stone pagoda there is central column with stones. With inner part of pagoda it can be regarded as mixed structural system that constitutes central contral column and inner structural part. And it could be a kind of middle step to more developed structure of whole as wooden pagodas in Japan. Third, as the sarira reliquary was in central column on the first floor, the cross-shaped space could be made. The formation of this space was so on the natural meaning of sarira that the concept as memorial service of graves could be apllied to the pagoda. The style of tomb in Baekje was expressed to the space of 1st floor in pagoda where Sarira had been mstalled. That was not only effective presentation of symbolic space but also easier method in the use of same material.

• Journal of architectural history
• /
• v.32 no.5
• /
• pp.51-58
• /
• 2023

This study was conducted to examine the architectural characteristics of Hak-seong Lee Family's Geun-jae-gong Historic House located in Seok-cheon-ri, Ung-chon-myeon, Ulju-gun, Ulsan. The house is said to have been rebuilt in the early 20th century after it was built in the 18th century, and now there are nine buildings left, including the An-chae, Sa-rang-chae, Sa-dang, storehouses and etc. This house is a large-scale house that is difficult to find similar cases in near region. The division of areas on each building is clear, and it is evaluated that it retains the typical characteristics of the head family in the late Joseon Dynasty in terms of its overall size and layout. In addition, the current wooden structure, which is said to have been rebuilt in the early 20th century, shows the composition method and space utilization method of the 3-Dori type upper structure, which have become more diverse since the late Joseon Dynasty. This has not been dealt with in the previous survey, and should be considered in detail through this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4992-4998
• /
• 2015

The purpose of this study is to investigate that which Goon office buildings were reused from existing buildings and to identify remodeling and extension ways of the reused to match Goon's administration work. This study used literature research method, i.e., analysing the digital images, the annotation, and the official documents between the Japanese government-general of Korea and To(道), and articles of newspapers and journals. The reused were governmental offices of Joseon(朝鮮) dynasty, existing Goon office buildings of Korean empire government and old buildings with unknown purposes. They were remodelled and extended to match Goon's administration work. Common remodelling was making large space with desks for civil petitions and projecting an small entrance from the center of main building's facade. Common extension was constructing accessory buildings with simple wooden structure, locating them to back or side of the reused, and connecting them through external corridor. As many as 30% of 218 Goon office buildings were reused. About 57% of them were replaced as new office buildings, however the number of the new was rapidly decreased after mid 1930s.