• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.462-468
• /
• 1999

A natural mixed forest of Pinus densiflora and Quercus variabilis in Mt. Mohu area was studied to investigate patterns of species competition and productivity. Ten $10m{\times}10m$ plots were set up and eight sample trees of each Pinus densiflora and Quercus variabilis were harvested for dimension analysis. Mean tree age of Pinus densiflora was 33 years and that of Quercus variabilis was 26 years. DBH and height of Quercus variabilis were larger than those of Pinus densiflora untill tree age 15. After tree age 15, height of Quercus variabilis was higher than height of Pines densiflora while DBH of Quercus variabilis was smaller than DBH of Pines densiflora. For a tree of a given DBH, there was little difference in leaf dry weight between Pines densiflora and Quercus variabilis. For a tree of a given DBH, dry weights of stem wood, stem bark and branches of Quercus variabilis weighed more than those of Pinus densiflora, and the differences between the dry weights of the two species became greater as DBH increased. Net assimilation ratio of Quercus variabilis was higher than that of Pinus densiflora, and biomass accumulation ratio of Quercus variabilis was lower than that of Pinus densiflora. It may be given as a conclusion that Quercus variabilis was superior to Pinus densiflora in species competition owing to faster height growth, higher net assimilation ratio, and lower biomass accumulation ratio. Aboveground stand biomass was 87.7t/ha and aboveground stand net production was 8.3t/ha/yr.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1311-1320
• /
• 2005

The purpose of this research is to survey characteristics of microbial community and the removal efficiency of organic materials for biological activated carbon in water treatment plant. Coal based activated carbon retained more attached bacterial biomass on the surface of the activated carbon than the other activated carbon with operating time and materials. The heterotrophic plate count(HPC), eubacteria(EUB) and 4,6-diamidino-2-phenylindole(DAPI) counts were ranged from $0.95{\times}10^7$ to $52.4{\times}10^7$ CFU/g, from $3.8{\times}10^8$ to $134.2{\times}10^8$ cells/g and from $7.0{\times}10^8$ to $250.2{\times}10^8$ cells/g, respectively. The biomass of EUB and DAPI appeared to be much more $10^2$ than HPC, which were increasing in bed volume of 20,000 at the stage of steady-state. The change of microbial community by analyzing fluorescent in situ hybridization(FISH) method with rRNA-targeted oligonucleotide probes, the dominant group was $\alpha$-proteobacteria($\alpha$ group) and high G+C content bacteria(HGC) the lowest distributing rate before reaching the bed volume of 20,000. After reaching the bed volume of 20,000, $\alpha$ group and other groups of bacteria became decreased, on the other hand, the proportion of both $\beta$-proteobacteria($\beta$ group) and $\gamma$-proteobacteri($\gamma$ group) were increasing. Coconut and wood based activated carbons had similar trend with coal based activated carbon, but the rate of $\alpha$ group on coal based activated carbon had gradually increased. Bacterial production with the operating period appeared highest in coal based activated carbon at the range of $1.2{\sim}3.4\;mg-C/m^3{\cdot}h$ while the coconut and wood based activated carbon were ranged from 1.1 to 2.6 $mg-C/m^3{\cdot}h$ and from 0.7 to 3.5 $mg-C/m^3{\cdot}h$ respectively. The removal efficiency of assimilable organic carbon(AOC) showed to be highly correlated with bacterial production. The correlation coefficient between removal efficiency of AOC and bacterial production were 0.679 at wood based activated carbon, 0.291 at coconut based activated carbon and 0.762 at coal based activated carbon, respectively.

• The Korean Journal of Mycology
• /
• v.41 no.4
• /
• pp.236-242
• /
• 2013

It is known not only that antifungal compounds such as sparassol, methyl orsellinate (ScI) and methyl-dihydroxy-methoxy-methylbenzoate (ScII) were produced during submerged culture from Sparassis crispa, but also that ScI and ScII were appeared higher antifungal activity than sparassol. The aim of this study, antifungal compounds of Sparassis latifolia were purified from mycelial culture media and identified by using NMR and ESI-MS. Based on HPLC analysis, methyl orsellinate and sparassol were detected at 15 min and 31 min of retention time, respectively. The compounds derived from S. latifolia were classified into four production patterns according to their strains. The strains originated from host plant Larix kaempferi and Pinus koraiensis showed different patterns of compound production, whereas the strains originated from host plant P. densiflora and Abies holophylla showed almost same patterns. There was no correlation between mycelial biomass and compound production. KFRI 645 strain from L. kaempferi exhibited higher methyl orsellinate production (0.170 mg/ml). Sparassol was produced by KFRI 747 from P. densiflora (0.004 mg/ml). Thus, our result revealed the new fact that methyl orsellinate and sparassol have different patterns according to the strains originated from different host plants.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.391-395
• /
• 2009

For the conversion of domestic waste-wood into energy, a fixed bed gasifier ($0.9 m{\times}2.4 m$) having the capacity of 2 ton/day was designed and constructed. The dual knife valve was used to feed waste-wood of which size was 3~5 cm and a rotary stoker system was installed in the bottom of gasifier. The pilot gasification system consisted of feeding system, fixed bed gasifier, gravity fine particle collector, heat exchanger for syngas cooling, ID fan, and cooling tower. The operation temperatures of gasifier were $700{\sim}1000^{\circ}C$ and the concentrations of syngas were CO: 25~40 vol%, $H_2$: 7~12 vol%, $CH_4$: 2~4 vol%, $CO_2$: 12~24 vol%. The calorific value of syngas was $1100{\sim}1500kcal/Nm^3$ and was enough to be applied in the industrial combustor. Also the gas engine was operated by using syngas from biomass gasifier and produced 1~4 kW of power.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.250-257
• /
• 2017

Eight hydrolyzable tannin compounds, such as gallic acid (1), methyl gallate (2), kurigalin (3), 1,2,3,6-tetra-O-galloyl-${\beta}$-D-(+)-glucose (4), 1,2,3,4,6-penta-O-galloyl-${\beta}$-D-(+)-glucose (5), 6-m-digalloyl-1,2,3,4,6-penta-O-galloyl-${\beta}$-D-(+)-glucose (6), isocorilagin (7), macabarterin (8), were isolated from the EtOAc and $H_2O$ soluble fractions of Katsura tree (Cercidiphyllum japonicum) leaves, wood and bark. Then antioxidative and anti-inflammatory activity were evaluated on the each isolated compound. The antioxidative test was DPPH radical scavenging activity and all of the isolated compounds indicated much higher antioxidative values compare to the controls, BHT and ${\alpha}$-tocopherol. In the anti-inflammatory test measuring nitric oxide (NO) inhibition activity, methyl gallate, 1,2,3,6-tetra-O-galloyl-${\beta}$-D-glucose and 1,2,3,4,6-penta-O-galloyl-${\beta}$-D-glucose inhibited NO production, and especially, methyl gallate showed high inhibition activity. However, the anti-inflammatory activity of the hydrolyzable tannins did not show positive effect. Based on the above results, the hydrolyzable tannins of katsura tree may be used as one of the natural biomass sources that can substitute with the synthetic antioxidant.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.29-37
• /
• 2018

Bamboo is one of the major biomass resources in the world. To obtain valuable information for effective use of bamboo resources in Korea, the anatomical characteristics of the commercial Korean bamboo species (Phyllostachys pubescens, Phyllostachys nigra, and Phyllostachys bambusoides) were analyzed. The structures in bamboo culm were observed by optical and scanning electron microscopy. Also the crystalline properties as relative crystallinity and crystallite width were measured by an X-ray diffraction method. The three Korean bamboo species had the vascular bundle type I with tylosoid in intercellular space. In the outer part of culm, vascular bundles showed denser spacing than inner part. The fiber length in outer part samples of the three bamboo species showed longer than inner part samples. Furthermore, the fiber length showed a significant difference between inner part and outer part in three bamboo species, showing the longest fiber length in Phyllostachys bambusoides. Phyllostachys pubescens showed the greatest diameter in vessel and parenchyma on cross section. Parenchyma cells in Phyllostachys pubescens and Phyllostachys bambusoides showed similar length and width in both radial and tangential sections. The relative crystallinity and crystallite width in outer part samples of the three bamboo species showed higher values than those in inner part samples, with the greatest values from Phyllostachys bambusoides.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.929-933
• /
• 2010

According to the IPCC guideline (2006), uncertainty assessment is very important in terms of the greenhouse gas inventory. Therefore, the purpose of this study is to estimate the basic wood density (BWD) and its uncertainty for Pinus densiflora in Korea. In this study, Pinus densiflora forests were divided into two ecotypes which were Gangwon and Jungbu regions. A total of 33 representative sampling plots was selected to collect sample trees after considering the tree ages and DBH distributions. The BWD showed statistically no difference between age classes based on IPCC's classification. While, it showed statistically difference(pvalue=0.0017) between eco-types. The BWD and uncertainty was 0.396(g/$cm^3$) and 12.9(%) for Pinus densiflora in Gangwon, while it was 0.470(g/$cm^3$) and 3.8(%) for Pinus densiflora in Jungbu. The values of the BWD uncertainty for Pinus densiflora were more precised than the values given by the IPCC guideline.

• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.211-224
• /
• 2012

Technology for energy recovery from waste can reduce the greenhouse gas emissions. So recently, there are several companies using RDF, RPF, WCF instead of using only coal fuel and it's part of the fuel on the increase. In this study, we developed Wood chip fuel $CO_2$ emission factor through fuel analysis. It's moisture content is 23%, received net calorific value is 2,845 kcal/kg, and received basis carbon is 34%. The result of emission factor is $105ton\;CO_2/TJ$, it's 5.9% lower than 2006 IPCC guideline default factor $112ton\;CO_2/TJ$. The gross GHG(Greenhouse gases) emissions of plant A is $178,767ton\;CO_2 eq./yr$, and Net GHG emissions is $40,359ton\;CO_2 eq./yr$. Therefore, the reduction of GHG emissions is $138,408ton\;CO_2/yr$ through using WCF, and I accounts for 77% of all GHG emissions.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.240-245
• /
• 2010

In this study, characteristics of wood pellet gasification was studied using a Two Stage Gasifier which is consisted of pyrolysis reactor and ultra high temperature reformer. The average yields of $H_2$, $CH_4$, CO, $CO_2$ were 16.7, 11.3, 37.2, 26.6 L/mim, conversion rate from biomass to gas was 65% in pyrolysis reactor and gas yields in reformer were 55.4, 0.8, 120.8, 56.8 L/mim, respectively. The hydrogen flow rate from reformer is obtained 360.1 L/hr. The most of $CH_4$ was decomposed from 12.3 to 0.3 vol.% while $H_2$ is from 18.2 to 23.7 vol.% in reformer by methane dry reforming, Boudouard reaction, oxidation and/or steam reforming. The amount of $H_2O$ generated by hydration reaction from reformer was 1111.8 g, its accelerated conversion of $CH_4$ to other products. The conversion rate from $CH_4$ to other Compounds was 97.2%. Cold gas efficiency was 53.2%.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.305-310
• /
• 2009

Yellow poplar was selected a promising biomass resources for bio-ethanol production through alkali prehydrolysis, enzymatic saccharification and fermentation using commercial cellulase mixtures (Celluclast 1.5L and Novozym 342 mixtures) and fermenting yeast. In alkali prehydrolysis, 51.1% of Yellow poplar biomass remained as residues, which chemical compositions were 82.2% of cellulose, 17.6% of xylan and 2.0% of lignin. In alkali prehydrolysis process, 96.9% of cellulose, 38.0% of xylan and 5.7% of lignin were remained. Enzymatic saccharification by commercial cellulases led to 87.0% of cellulose to glucose and 87.2% of xylan to xylose conversion. Produced glucose and xylose were fermented with fermenting yeast (Saccharomycess cerevisiae), which resulted in selective fermentation of glucose only to bio-ethanol. Residual monosaccharides after fermentation were consisted to 0.4-1.4% of glucose and 92.1-99.5% of xylose. Ethanol concentration was highest for 24 h fermentation as 57.2 g/L, but gradually decreased to 56.2 g/L for 48 h fermentation and 54.3 g/L for 72 h fermentation, due to the ethanol consumption by fermenting yeast.