• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.766-767
• /
• 2007

현재 국내 원자력 발전소내의 노후화된 GCB 차단기를 VCB로 교체할 경우, 관련한 기술적 규정들이 확립되지 않아, 이에 대한 기술적 평가가 요구되었다. 본 연구에서는 원자력 발전소 주요 전동기의 기동 및 차단시에 발생하는 개폐서지를 측정하여 발생된 서지의 크기를 분석하고 EMTP 시뮬레이션 방법을 통하여 교체 시 기술 기준을 제안하고 적정성을 검증하였다.

• Nuclear Engineering and Technology
• /
• v.30 no.2
• /
• pp.83-90
• /
• 1998

To predict effects of seismic isolation, seismic isolation bearings were applied to the Wolsong reactor building and the analytical study was performed. For this study, the Wolsong reactor building was modeled using lumped masses and beam elements. Design Basis Earthquake with a ground acceleration of 0.2g was applied. And then, the behavior of the isolated structure was compared with that of the unisolated structure. The horizontal response acceleration at the top of the unisolated reactor building was 0.99g, while that of the isolated one was 0.14g(15% damping) and the acceleration response along the height of the structure was constant. The maximum displacement of the unisolated structure was 8.3mm, while that of the isolated structure was 66mm. The application of isolation bearings on the reactor building reduces seismic loads but increases the displacement of the structure on a large scale. Therefore, when using isolation bearings, the reactor building and BOP should be located on a common mat to cover the large displcement.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.163-168
• /
• 1996

Simulations of Wolsong-1 Phase-B commissioning measurements have been performed, as part of the program to validate WIMS-AECL lattice cell calculations for application to CANDU reactor simulations in RFSP. A required component of these simulations is the calculation of incremental cross sections representing reactivity control devices in the reactor. The incremental cross section properties of the Wolsong-1 adjusters, Mechanical Control Absorbers (MCA) and liquid Zone Control Units (ZCU) are based on the WIMS-AECL/MULTICELL modelling methods and the results are compared with those of WIMS-AECL/DRAGON-2 modelling methods.

• 한국해양학회지
• /
• v.15 no.1
• /
• pp.58-61
• /
• 1980

Water movements at nine different layers were observed from July 31 to August 2, 1976 at station H, which has water depth 42 meters and 3km far from the coast of Wolsong, and dispersion coefficients were computed from these current data, then relative magnitudes of dispersion coefficients were calculated at each layers. Relative magnitudes of dispersion coefficients based on the surface value are 62% at 5m layer, 24% at 10m layer, 20% at 15m and 20m layers, 17% at 25m layer, 24% at 30m layer, 28% at 35m layer and 15% at bottom layer, respectively.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.272-277
• /
• 1995

The current direction of emergency procedures for CANDU reactors is reviewed and compared based on scope, methodology and format preponderantly, and an attempt is made to integrate these procedures. As a result, a recommendation for Wolsong 2, 3 & 4 emergency procedures is presented as event-specific procedures, generic procedure and whose format is combination of logic diagram and technical basis document.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1273-1279
• /
• 2010

Pressure tubes at the CANada Deuterium Uranium (CANDU) nuclear power plants are periodically inspected in accordance with the CSA N285.4 code. If flaws that do not satisfy the criteria given in CSA N285.4 are detected, the code permits a fitness-for-service assessment to determine the acceptability of the flawed pressure tubes. In this paper, the Wolsong In-service Evaluation System (WIES) is introduced; this system has been developed for the assessment of the flawed pressure tubes and is based on CSA N285.8. Since the system evaluates the integrity of flawed pressure tubes exactly and promptly during an in-service inspection, it will help in operating the Wolsong nuclear power plants without prolonging the outage period.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.539-543
• /
• 2003

The objective of this to improve the reliability of the safety evaluation code for Wolsong Tritium Removal Facility(WTRF) which is on the development for environmental assessment. To achieve this, tritium concentrations calculated in the Wolsong Units of this study are compared with that of the existing reference. As the result, the tritium concentration in each Wolsong nuclear power plant unit just before operating WTRF is 60.9Ci/kg, 36.3Ci/kg, 30.0Ci/kg, 26.5Ci/kg under the assumption that the WTRF begins operation in 2005, respectively. This result is almost same with that of the existing reference. But the reducing rate of tritium concentration in the moderator is faster than that of the reference result Finally it is expected to drop below 10Ci/kg after WTRF operation. And this result is also similar with that of the existing reference.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.551-560
• /
• 2012

The Wolsong-1 (W-1) Phase-B pre-simulations were carried out in preparation for tests to be conducted for the restart of the reactor after a major refurbishment project that included replacement of the pressure tube. These pre-simulations for Wolsong-1 Phase-B differ from those in the past that were performed for the Wolsong-1,2,3,4 tests in that these tests use the WIMS/DRAGON/RFSP-IST code suite for verification of the tests and gadolinium instead of the traditional PPV/MULTICELL/RFSP code system and boron as poison in the moderator system. The use of gadolinium is deemed not to have domestically accumulated experience gained from the previous Phase-B tests. Thus, it is appropriate to conduct a study in order to gain a correct understanding and interpretation of potential differences in test results stemming from using gadolinium rather than boron. Although the calibration of the reactivity device will not be noticeably different using boron and gadolinium at a constant moderator temperature, the temperature dependency of the neutronic behavior due to the presence of gadolinium in the moderator system might be pronounced. The results of the pre-simulations using gadolinium revealed that the moderator temperature reactivity coefficients indeed showed significant differences in comparison with those with boron. In order to secure the validity of the analysis results, the newly acquired WIMS/DRAGON/RFSP-IST code suite was verified against the W-2,3,4 Phase-B test results. The results of the new code suite verifications revealed some overall improvements in accuracy; justification of the use of the code can be claimed for the validation of the W-1 Phase-B test results.

• Journal of the korean society of oceanography
• /
• v.39 no.4
• /
• pp.234-242
• /
• 2004

The pigment composition and concentration of phytoplankton assemblages using HPLC in the adjacent waters of four nuclear power plants (Yonggwang, Kori, Wolsong and Ulchin) were investigated during the spring blooming in 2004. The mean concentration of chlorophyll a ranged from 563.8 to 2,949.0ng $l^{-1}$, with the lowest concentration at Kori and the highest concentration at Wolsong. Among the carotenoids, the amounts of fucoxanthin and chlorophyll $C_2$ were relatively higher than those of other pigments in the study site. As minor pigments, zeaxanthin, chlorophyll b, 19'-butanoyloxyfucoxanthin, diadinoxanthin, 19'-hexanoyloxyfucoxanthin, chlorophyll $C_3$ and peridinin were detected. The results of pigment composition and concentration showed that diatoms had an important proportion of phytoplankton community when a spring bloom occurred. Cyanobacteria was present relatively low density at the Wolsong and the green alga such as chlorophytes and prasinophytes were abundant at the Yonggwang and Kori, while dinoflagellates characterized by peridinin were common at Ulchin and Kori. The pigment composition and concentration of phytoplankton after passing through the cooling-water system of nuclear power plant were highly variable. No distinct trend of the change of each pigment composition and amount was detected but the variation of fucoxanthin and chlorophyll $C_2$ highly coupled with that of chlorophyll a. We pointed out that the diatom controlled the overall variation of phytoplankton biomass during the spring season.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.587-591
• /
• 1997

The DGs (Diesel Generators) in NPP (Nuclear Power Plant) has been used for the emergency electric power source to shut down the nuclear reactor safely in case of station blackout. The RCM (Reliability Centered Maintenance) has been applied to DGs for increasing the safety of NPP. The structured defects of DG were not remedied by the improvement of maintenance method. As the first stage of RCM, to find the structured defects, its failure modes were searched and analyzed through the ten year maintenance information. The structured defects such as the air compressor, the lubricating oil pressure, and the insufficient load were the root causes of main failures. The air reservoir reinstallation, the lubricating oil tube modification, the load bank installation, and the qualitative instrumentation were the solutions for the hardware oriented RCM of DGs. There remains the software oriented RCM such as the rejection of useless maintenance, the preventive maintenance, the database of maintenance information, and the predictive maintenance.