• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.24-34
• /
• 1997

In this study, two different types of complementary electrochromic devices using amorphous $WO_{3}$ films as a working electrode, $V_{2}O_{5}$ film and NiO film as counter electrodes respectively were investigated. For the devices using amorphous and crystalline $V_{2}O_{5}$ films of $100{\sim}150nm$ thickness with $ITO/WO_{3}/LiClO_{4}-PC/V_{2}O_{5}/ITO$ structure, an optical modulation of $50{\sim}60%$ were obtained at a potential range of $1{\sim}2V$. It has been shown that transmittance and reflectance of light could be electrically controlled by low applied voltage. For the devices with $ITO/WO_{3}/LiClO_{4}-PC/NiO/ITO$ structure in which NiO film was deposited by a RF reactive sputtering, the optical modulation in visible light region (${\lambda}=550nm$) and in near infrared light region (${\lambda}=850nm$) were 25% and 30%, respectively.

• Journal of Information Processing Systems
• /
• v.14 no.4
• /
• pp.1010-1032
• /
• 2018

Recent advances in medical science have made people live longer, which has affected many aspects of life, such as caregiver burden, increasing cost of healthcare, increasing number of disabled and depressive disorder persons, and so on. Researchers are now focused on elderly living assistance services in smart home environments. In recent years, assisted living technologies have rapidly grown due to a faster growing aging society. Many smart devices are now interconnected within the home network environment and such a home setup supports collaborations between those devices based on the Internet of Things (IoT). One of the major challenges in providing elderly living assistance services is to consider each individual's requirements of different needs. In order to solve this, the virtualization of physical things, as well as the collaboration and composition of services provided by these physical things should be considered. In order to meet these challenges, Web of Objects (WoO) focuses on the implementation aspects of IoT to bring the assorted real world objects with the web applications. We proposed a semantic modelling technique for manual and semi-automated service composition. The aim of this work is to propose a framework to enable RESTful web services composition using semantic ontology for elderly living assistance services creation in WoO based smart home environment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.21-26
• /
• 2002

Luminescence and scintillation properties of $PbWO_{4},\;XAIO_{3}$ (X = Y, Lu, Y-Lu) and $LiBaF_{3}$ based scintillators are reported. The effect of present and often not understood defect states is demonstrated in different scintillator parameters and related measurements are discussed. Importance of understanding of defect states participating in the processes of energy transfer and storage in the scintillating materials is emphasised.

• Communications of the Korean Mathematical Society
• /
• v.16 no.4
• /
• pp.621-626
• /
• 2001

Let { $A_{>o}$ t= exp(M log t)} $_{t}$ be a dilation group where M is a real n$\times$n matrix whose eigenvalues has strictly positive real part, and let $\rho$be an $A_{t}$ -homogeneous distance function defined on ( $R^{n}$ ). Suppose that K is a function defined on ( $R^{n}$ ) such that /K(x)/$\leq$ (No Abstract.see full/text) for a decreasing function defined on (t) on R+ satisfying where wo(x)=│log│log (x)ll. For f$\in$ $L_{1}$ ( $R^{n}$ ), define f(x)=sup t>0 Kt*f(x)=t-v K(Al/tx) and v is the trace of M. Then we show that \ulcorner is a bounded operator of $L_{-{1}( $R^{n}$ ) into $L^1$,$\infty$( $R^{n}$).

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.609-617
• /
• 2000

This study is aimed at investigating an effect of HCl gas on selective reduction of NOx over a CuHM and $V_2O_5-WO_3/TiO_2$ catalyst. SCR process is the most effective method to remove NOx, but catalyst can be deactivated by the acidic gas such as HCl gas which is also included in flue gas from the incinerator. In dry condition of flue gas, the CuHM catalyst treated by HCl gas has shown higher NO removal activity than the fresh catalyst. The activity of the catalyst can be restored by treating at $500^{\circ}C$. On the contrary. $V_2O_5-WO_3/TiO_2$ catalyst is obviously deactivated by HCl and the deactivation increases in proportion to the concentration of HCl gas. The deactivated catalyst is not restored to it's original activity by heat treatment for regeneration. In wet flue gas stream, the CuHM catalyst has shown lower activity than fresh catalyst and $V_2O_5-WO_3/TiO_2$ catalyst was severely deactivated by HCl treatment. The activity loss of catalysts are mainly due to the decrease of Br$\ddot{o}$nsted acid site on the catalyst surface by $NH_3$ TPD. The change of BET surface area of CuHM catalyst after the reaction isn't observed but $V_2O_5-WO_3/TiO_2$ catalyst is observed. The amount of $Cu^{{+}{+}}$ and $V_2O_5$ is decreased after the reaction. From these results, it is expected that CuHM catalyst should be better than $V_2O_5-WO_3/TiO_2$ catalyst for its application to the incineration of flue gas.

• Electronics and Telecommunications Trends
• /
• v.28 no.6
• /
• pp.133-140
• /
• 2013

기존의 센서 접속 기술은 그 분야에 띠라 다양한 표준과 규격이 존재하였다. 빌딩 자동제어 및 제어 네트워크용으로는 BACnet이 있으며, 공장제어 및 계측제어를 위한 Modbus 등이 다양한 프로토콜이 존재한다. 최근 M2M(Machine-to-Machine) 및 IoT(Internet of Things), WoT(Web of Things) 시대로 접어 들음에 따라 센서 및 각종 디바이스 간에 상호 통신할 수 있는 공통 프로토콜이 필요하게 되었다. IoT 프로토콜로 IEIF(Internet Engineering Task Force) CoAP(Constrained Application Protocol) 프로토콜이 핵심 역할을 하고 있으며, 차세대 센서 접속 프로토콜로 IETF CoAP이 많이 사용될 것으로 예상된다. 본고에서는 IETF CoAP 표준화 동향 및 규격에 대해 살펴본다.

• Journal of Sensor Science and Technology
• /
• v.24 no.1
• /
• pp.15-21
• /
• 2015

Transparent and conductive multilayer thin films consisting of three alternating layers FZTO/Ag/$WO_3$ have been fabricated by radio-frequency (RF) sputtering for the applications as transparent conducting oxides and the structural and optical properties of the resulting films were carefully studied. The single layer fluorine doped zinc tin oxide (FZTO) and tungsten oxide ($WO_3$) films grown at room temperature are found to have an amorphous structure. Multilayer structured electrode with a few nm Ag layer embedded in FZTO/Ag/$WO_3$ (FAW) was fabricated and showed the optical transmittance of 87.60 % in the visible range (${\lambda}=380{\sim}770nm$), quite low electrical resistivity of ${\sim}10^{-5}{\Omega}cm$ and the corresponding figure of merit ($T^{10}/R_s$) is equivalent to $3.0{\times}10^{-2}{\Omega}^{-1}$. The resultant power conversion efficiency of 2.50% of the multilayer based OPV is lower than that of the reference commercial ITO. Asymmetric D/M/D multilayer is a promising transparent conducting electrode material due to its low resistivity, high transmittance, low temperature deposition and low cost components.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.3
• /
• pp.169-174
• /
• 1994

The reaction layer formed at interface between matrix and fiber has significant effects on the mechanical properties and behaviors of deformation m FRM. In this study, the mechanical properties and interfacial behaviors according to surface finishing on the fibers and according to heat treatment in FRM were investigated. FRM was fibricated by diffusion bonding method. In W/Al alloy composite and W/Al composite, W of which was coated with $WO_3$, the heat treatment was carried out thermal cycling method from 373K to 673K. In W/Al composite, W of which was coated with $WO_3$, growth of interface layer was hardly occured in spite of the increasing various thermal cycles. It was exhibited that oxidized W/Al composite were higher strength than non-oxidezed W/Al composite with the increasing thermal cycles. The compounds of fiber/matrix interface were analyzed into $WAl_{12}$, $WAl_7$, and $AlWO_3$, respectivly. Therefore the interfacial compounds of fiber/matrix seriously affected the mechanical properties and behaviors of deformation in FRM.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.91-97
• /
• 2017

IoT (Internet of Things) systems are based on heterogeneous hardware systems of different types of devices interconnected each other, ranging from miniaturized and low-power wireless sensor node to cloud servers. These IoT systems composed of heterogeneous hardware utilize data sets collected from a particular set of sensors or control designated actuators when needed using open APIs created through abstraction of devices' resources associated to service applications. However, previously existing IoT services have been usually developed based on vertical platforms, whose sharing and exchange of data is limited within each industry domain, for example, healthcare. Such problem is called 'data silo', and considered one of crucial issues to be solved for the success of establishing IoT ecosystems. Also, IoT services may need to dynamically organize their services according to the change of status of connected devices due to their mobility and dynamic network connectivity. We propose a way of dynamically composing IoT services under the concept of WoT (Web of Things) where heterogeneous devices across different industries are fully integrated into the Web. Our approach allows developers to create IoT services or mash them up in an efficient way using Web objects registered into multiple standardized horizontal IoT platforms where their resources are discoverable and accessible. A Web-based service composition tool is developed to evaluate the practical feasibility of our approach under real-world service development.

• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.447-458
• /
• 1998

The spinel Ihelzolite of ultramafic xenoliths are found in the alkali basalt from eastern part of the Cheju island, Korea. The xenolith is are mainly composed of olivine, orthopyroxene, clinopyroxene and spinel. Based on the chemical compositions of the constituent minerals, the ultramafic xenolith belong to upper mantle peridotite. Each minerals have a protogranular texture. Olivine with kink band texture partly shows undulatory extinction. Some clinopyroxenes have spongy textured rims. Brown spinels occur in the interstices between olivine and pyroxene grains. Olivine is mostly forsterite $(Fo_{89-90})$. Orthopyroxene is enstatite $(Wo_{1.3}En_{88.4}Fs_{10.3})$ with 3.87~5.25 wt% $Al_{2}O_{3}$. Clinopyroxene is diopside $(Wo_{48.0}En_{46.2}Fs_{5.8})$ with 6.75~5.03 wt% $Al_{2}O_{3}$. Spinel has the Mg value of 75.9 and its Cr-number is 10.2. According to the PoT estimations for the mantle xenoliths, equilibrium temperatures of the xenoliths range from 1023 to $1038^{\circ}C$ and pressure is 18 kbar. Spinellhelzolite from this area, which is characterized by lower Cr-number (10.2) and homogeneous chemical compositions, supports that these ultramafic xenoliths are derived from the upper mantle.