• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.312-316
• /
• 2014

This paper describes a turnout without movable parts for magnetically levitated vehicles with hybrid magnets, which have been studied by the authors in place of streetcars. Their low construction cost and low maintenance is key to their practical use. Magnetic levitation systems using forces of attraction can generate guidance force automatically, but the damping force against lateral motion is negligible. However, the lateral damping characteristic was improved by using divided iron type magnets and rails. Using this turnout without movable parts will facilitate smooth direction switching.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.474-479
• /
• 2013

Mass reduction of the machine tool movable parts is a tool for achieving lower energy demands of the machine tool operation. The realization of lightweight design in machine tool can be achieved by structural lightweight design and material lightweight design. In this study, topology optimization strategy was applied to design optimized structures of movable parts of 5 axis machining center. The weight of ram which has most significant influence on the stiffness of whole machine tool was reduced without stiffness deterioration. The redesigned optimized ram has 24.2% less weight while maintaining the same displacement caused by cutting force.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.422-430
• /
• 2006

The horn and movable parts around the gap of the conventional semi-spade rudder are visualized by high speed CCD camera with the frame rate of 4000 fps (frame per second) to study the unsteady cavity pattern on the rudder surface and gap. In addition, the pressure measurements are conducted on the rudder surface and inside the gap to find out the characteristics of the flow behavior. The rudder without propeller wake is tested at the range of $1.0{\leq}{\sigma}_v\;1.6$ and at the rudder deflection angle of $-8{\leq}{\theta}{\leq}10^{\circ}$. The time resolved cavity images are captured and show strong cavitation around the rudder gap in all deflection angles. As the deflection angle gets larger, the flow separated from the horn surface increases the strength of cavitation. The accelerated flow along the horn decreases its pressure and the separated flow from the horn increases the pressure abruptly. The pressure distribution inside the gap reveals the flow moving from the pressure to suction side. In the negative deflection angle, the turning area on the movable part initiates the flow separation and cavitation on it.

• 분석과학
• /
• 제30권4호
• /
• pp.167-173
• /
• 2017

In the era of the forth Industrial Revolution, open source code and open source hardware have gained much attention. In particular, 3D printing technology is expanding into the realms of classical science, technology and our daily lives. Relatedly, in the present study, we demonstrate the manufacture of a nano-LC MALDI spotter robot using 3D printing technology. The parts of the spotter robot were either made using a 3D printer or purchased as 3D printer parts from the 3D printer online market, so that anyone can make the robot without a deep knowledge of engineering or electronics, i.e., DIY (do-it-yourself) product. In the nano-LC MALDI spotter, the nano-LC eluent and MALDI matrix were mixed in a T-union and discharged from the capillary outlet. The eluent and matrix mixture could be spotted onto the movable MALDI plate. The MALDI plate was designed to translate in a two-dimensional space (xy plane), which was enabled by the movements of two stepper motors. In the paper, all computer-aided design (CAD) files for the parts and operation software are provided to help the reader manufacture their own spotter robot.

• 복식
• /
• 제60권6호
• /
• pp.1-10
• /
• 2010

The cultures and traditions of Asia has the roots so deep and it is the origin of inspiration. Therefore, it is easy to find a different inspiration when designing, expecially for Western designers who are seeking European tradition and its comparison. The most distinctive feature of the Asian look is non-structural and has no clear form close to the structure of the body or mathematical ratio, but is steric with 2-Dimensional planed textiles, and has a flexible, non-structural formative characteristic related to the movable body. This is base on the vision of the universe that regards the parts as the whole. From this research, generally studying about the Asian look and its non-structural formative characteristics. The study looked closely into the aesthetic value of non-structural formative characteristics formation, with basis on the large dress regulation system of the western reasoning and rationalism and mechanism. At first, my study pointed on the dressing functionalism or Neo-classism considering emotions, Anti-Western aspect observing surrealism dressing and expressionism dressing. Second, with men and women showing similar outer shape without the equivalent element such from wearing a corset, the sexism is abolished. Finally, the designers’ inner intention of art is being delivered, from the aspect that the expression of art, size and no waste of fabric shows effort of communicating with the world, giving value to the possibility of continuance.

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.394-399
• /
• 2017

본 연구는 오존수를 이용한 인체공학적 샴푸대가 분리 가능하고 미세분사 형식의 샤워헤드와 높낮이 조절이 가능한 샴푸대를 개발할 수 있는 장치기술 및 그 방법을 제시하고자 한다. 개발결과 기존의 장치보다 피시술자 머리가 세발대 안으로 들어오는 인체공학적 디자인과 목받이 부분을 높게 제작하여 물튀김 방지를 완성하였다. 실험결과 물을 공급하는 통에 부착되어 있는 온수 유지 히터를 통해 피시술자의 기호에 맞는 온도를 설정하여 시술 시 지연 시간 없이 온수 세발 가능하도록 온도센서를 통하여 확인한 결과 수온유지($38^{\circ}C$)가 일정하게 유지되었다. 그리고 오존수 변환장치 설치로 자체 살균(1PPM) 및 정화 기능까지 가능한 장치의 효용성을 알 수 있었다. 오존수를 20분 정도 측정한 결과 오존 농도가 1PPM 이하로 측정되어 안정성을 확보하였다. 최종적으로 오존수를 20분 정도 측정한 결과 오존 농도가 1PPM 이하로 측정되어 안정성을 확보하였고, 온수장치와 오존수 변환장치와 함께 이동 샴푸대의 모든 부분이 사용자가 사용하기에 불편함이 없도록 설계 하였다.