• 대한전자공학회논문지TC
• /
• 제40권11호
• /
• pp.34-41
• /
• 2003

본 논문에서는 MINT의 0.1㎛ PHEMT MIMIC 공정을 이용하여 제작한 광대역 증폭기와 주파수 혼합기를 사용해서 60㎓ 무선랜 송ㆍ수신 시스템을 설계 제작하였다. RF단 송신기의 출력파워는 0㏈m, 이득은 1.7㏈ 얻었고, 수신기의 노이즈 특성은 4.2㏈, 이득은 1.57㏈를 얻었다. 구현된 시스템은 통신거리 35m이상 거리에서 BER 10/sup -6/ 이하로 통신할 수 있다. 신호의 왜란과 은닉성이 강한 DSSS 방식을 사용하여, 단거리 비밀 통신을 목적으로 개발하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권7호
• /
• pp.2338-2353
• /
• 2015

In this paper, the optimal power allocation algorithm that minimizes the aggregate bit error rate (BER) of the secondary user (SU) in a downlink orthogonal frequency division multiplexing (OFDM) based cognitive radio (CR) system, while subjecting to the interference power constraint and the transmit power constraint, is investigated under the assumption that the instantaneous channel state information (CSI) of the interference links between the secondary transmitter and the primary receiver, and between the primary transmitter and the secondary receiver is perfectly known. Besides, a suboptimal algorithm with less complexity is also proposed. In order to deal with more practical situations, we further assume that only the channel distribution information (CDI) of the interference links is available and propose heuristic power allocation algorithms based on bisection search method to minimize the aggregate BER under the interference outage constraint and the transmit power constraint. Simulation results are presented to verify the effectiveness of the proposed algorithms.

• Journal of Communications and Networks
• /
• 제10권3호
• /
• pp.308-315
• /
• 2008

When operating in frequency-division duplex (FDD) mode, transmit beamforming in multiple-input single-output (MISO) wireless communication systems typically requires accurate knowledge of downlink channel state information (CSI) at the transmitter. In practical FDD systems, obtaining such downlink CSI at the transmitter is challenging, if not impractical. To circumvent such challenge and support user mobility, we present a new method for transmit beamforming based on simple beam-control commands (BCCs) in MISO FDD mobile systems. We then numerically evaluate the effects of BCC errors in terms of transmit power efficiency, system capacity, and outage probability.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.209-213
• /
• 2001

본 논문에서는 2.4GHz 대역의 무선LAN/영상전송장치와 블루투스의 전파간섭을 Monte-Carlo 방법을 사용해서 분석하였다. 컴퓨터 시뮬레이션의 결과에 의하면, 블루투스가 무선LAN/영상전송장치와 심각한 전파간섭을 피하기 위해서는 블루투스의 공중선 전력을 10mW로 제한하는 깃이 필요하다.

• Ocean Systems Engineering
• /
• 제8권1호
• /
• pp.33-39
• /
• 2018

The paper presents a numerical underwater channel model developed in MATLAB for estimating the optical link budget between a light emitting diode (LED) based optical transmitter and a photo diode (PD) receiver when operated in the harbor, coastal and deep waters locations in the Bay of Bengal. The water samples are collected at different locations in the Bay of Bengal using a water sampler during an offshore research cruise. The optical attenuation, the main inherent parameter determining the range of the optical communication link is identified for the different waters using an underwater irradiance measurement system in the laboratory. The identified parameters are applied to the numerical model and found that a 10 W LED and a photo diode based system can provide the optical budget required for a horizontal underwater communication range of about 0.5, 14 and 35 m in the harbor, coastal and deep waters locations respectively. By increasing the transmitter power to 50 W, the operating range of the communication link could be increased up to 53 m in deep water locations in the Bay of Bengal.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.539-542
• /
• 2005

본 논문에서는 900MHz의 ISM대역에서 사용가능한 통신방식 중 직접확산방식의 무선데이터 송수신 시스템을 제안${\cdot}$구현하였다. 특히 송수신기 간에 양방향 통신이 가능하도록 설계함으로써 900MHz 대역의 RF-ID 시스템과 같은 능동형 시스템으로의 확장이 가능하도록 하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.500-503
• /
• 2006

This paper gives a Wireless lightning detecting and warning system. This system composed of transmitter and receiver. It promptly senses lightning strikes on the power lines and transmission towers by using the lightning current detection circuit in a small transmitter situated on the top of power tower, and it sends the number of lightning strikes and the ID. of the tower to patrols through the receivers. This system will be used to discover the exact location of a lightning strike.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.477-483
• /
• 2020

This study proposes a DQ synchronous reference frame model of a series-parallel tuned inductive power transfer (SP-IPT) system. The wireless power transmission system experiences control difficulty because the transmitter-side controller cannot directly measure the receiver-side load voltages and currents. Therefore, a control-oriented circuit model that shows the dynamics of the IPT system is required to achieve a well-behaved controller. In this study, an equivalent circuit model of the SP-IPT system in a synchronously rotating reference frame is proposed using the single-phase DQ transformation technique. The proposed circuit model is helpful in modeling the dynamics of the voltages and currents of the transmitter- and receiver-side resonant tanks and loads. The proposed circuit model is evaluated using frequency- and time-domain simulation results.

• 한국정보통신학회논문지
• /
• 제17권6호
• /
• pp.1259-1265
• /
• 2013

무선 LAN과 같은 전파환경 내에서 무선 AP 등의 적절한 배치를 통하여 효율적인 서비스 반경을 확보할 수 있다. 실험을 위해서 FDTD법을 이용하여 정식화하고, 무선 AP 대신에 계산 공간의 임의 위치에서 가우시안 펄스를 입력하였다. 장애물의 위치에 따른 구조적 영향을 고려하고 이에 따른 수신 이득을 계산하였다. 장애물은 완전 도체 또는 콘크리트 벽면으로 모델링하고, 장애물을 사이에 둔 송신점과 수신점 사이에서의 회절효과 등의 영향을 평가하였다.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.28-32
• /
• 2007

This research proposed that development of wireless condition monitoring system using WLAN network. It offers the prospect of improved performance that removed a current a coaxial cable and reduced overall cost of condition monitoring. Recently, there is an interesting concern for wireless system as an infrastructure technology construct ubiquitous computing environment in the future. High performance computing board makes minimization with integrate of a various functions which support wireless LAN network. Instead of wired coaxial cable using measurement system in industry, wireless LAN network assists industry automation and engineer's convenience. Developed system adapted wireless LAN network on shipboard with engine room and deck house, it also executes wireless measurement test on 8500TEU containership.