• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.494-498
• /
• 2004

현대의 대형 건물은 복잡한 전기 배선 또는 가스 배관 등의 설비를 갖추고 있어서 다양한 화재 사고가 발생할 가능성이 커졌다. 이에 따라 무선의 다점 온도 측정 센서를 손쉽게 여러 위치에 설치 가능하도록 저렴하게 개발하여 적용함에 의하여 화재를 조기에 탐지하고 그 피해의 크기를 최소화하는 것이 필요하다. 무선 온도 센서의 송신기는 4채널로 9600 bps의 전송속도와, 10 mW의 출력으로 915 MHz 통신 주파수를 갖고 수신기와 작동되도록 구성하였다. 온도범위 $-55{\sim}150$도 사이에서 사용할 수 있도록 검증된 반도체 온도 센서 소자를 기본으로 사용하여 4개의 채널을 구성하고 실험을 수행한 결과 개발된 센서 시스템이 화재 탐지용으로 적용이 가능함을 확인하였다.

• 한국전자통신학회논문지
• /
• 제17권5호
• /
• pp.853-858
• /
• 2022

본 논문에서는 레이저 다이오드를 활용하여 수중 광 전력과 수중 광 무선통신의 동시전송을 연구하고 이에 대한 실험 결과를 보인다. 본 실험에서는 송신부에 전/광 변환을 위한 레이저 다이오드를 사용하고 수신부에는 광/전 변환을 위한 태양전지를 사용하였다. 수중 전송 실험을 위해서는 플라스틱 관에 물을 채워 구현하였으며, 수중 광 무선통신 및 수중 광 무선충전을 위해 레이저 송신단과 수신단 시스템을 최적화하였다. 본 실험에서는 100 mW 급 레이저를 사용하였으며, 레이저의 최대 전/광 변환효율을 18.5 % 였다. 수중 광 무선충전 및 수중 광 무선통신의 동시전송 실험결과, 수중에서 최대 5 m 전송시에 0.33 %의 DC-to-DC 전송효율을 보였으며, 수중 무선 광통신은 수중에서 1 m 전송시에 최대 50 kbps의 전송속도를 보였다.

• Smart Structures and Systems
• /
• 제15권6호
• /
• pp.1625-1642
• /
• 2015

We propose an electrically self-reliant structural health monitoring (SHM) system that is able to wirelessly transmit sensing data using electrical power generated by vibration without the need for additional external power sources. The provision of reliable electricity to wireless SHM systems is a highly important issue that has often been ignored, and to expand the applicability of various wireless SHM innovations, it will be necessary to develop comprehensive wireless SHM devices including stable electricity sources. In light of this need, we propose a new, highly efficient vibration-powered generator based on a tuned-mass-damper (TMD) mechanism that is quite suitable for vibration-based SHM. The charging time of the TMD generator is shorter than that of conventional generators based on the impedance matching method, and the proposed TMD generator can harvest 16 times the amount of energy that a conventional generator can. The charging time of an SHM wireless transmitter is quantitatively formulated. We conduct wireless monitoring experiments to validate a wireless SHM system composed of a self-reliant SHM and a vibration-powered TMD generator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1008-1013
• /
• 2011

The importance of broadband wireless communication system at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. Duplexing methode uses FDD to transmit and receive broadband data at the same time. In the case of FDD we assign a private use channel each with the transmission at the receiving. In this paper, We implement multiple access wireless OFDM transceiver. We verified that one ground transceiver communicates with two car transceiver at the same time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.411-414
• /
• 2004

This paper introduces a modulation method for digital wireless communication based on general DS-QPSK. The design and fabrication is for home networking application to a typical RF transmitter with DS-QPSK modulator. This modulator implemented using VHDL hardware programming language, the fabrication of IC chip $5{\times}5 mm^2$ was carried by 27th IDEC MPW(Multi Project Wafer) process in 0.35${\mu}m$ rule at Samsung Inc. This paper presented the important of this technology for the future application in wireless sensor. This module can be efficient usage for home network to transmit the RF wireless sensor system.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.227-230
• /
• 2000

Chuas circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chuas circuits are proposed and synchronizations of a equivalent wire and wireless power line are investigated. Since the synchronization of the equivalent wire and wireless system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. As a result, the chaos synchronization has delay characteristics in the equivalent wire and wireless transmission system caused by the line parameters L and C.

• ETRI Journal
• /
• 제40권5호
• /
• pp.582-591
• /
• 2018

In this paper, we present a performance analysis of large-scale multi-input multi-output (MIMO) systems for wireless backhaul networks. We focus on fully connected N nodes in a wireless meshed and multi-hop network topology. We also consider a large number of antennas at both the receiver and transmitter. We investigate the transmission schemes to support fully connected N nodes for half-duplex and full-duplex transmission, analyze the achievable ergodic sum rate among N nodes, and propose a closed-form expression of the achievable ergodic sum rate for each scheme. Furthermore, we present numerical evaluation results and compare the resuts with closed-form expressions.

• 한국전자파학회논문지
• /
• 제21권3호
• /
• pp.285-291
• /
• 2010

본 논문에서는 조명용 LED와 솔라 셀을 사용하여 실내 무선광 통신이 가능함을 보인다. 조명용 LED를 광원으로 사용하면 조명과 신호의 송신을 겸할 수 있으며, 솔라 셀을 수광 소자로 이용하면 조명광을 수신하여 에너지를 축적하는 동시에 신호를 검출할 수 있기 때문에 별도의 통신 시설을 설치하지 않고 전송이 가능하여 매우 편리하다. 실험에서는 조명용 LED와 솔라 셀을 사용하여 9.6 kbps 속도로 무선광 데이터 전송을 실시하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.588-600
• /
• 2017

We develop a wireless, contact free power transfer mechanism that is safer than the direct metallic contact and robust to imperfect alignment on landing at the base station. A magnetic field is created using inductors on both the transmitting and receiving sides. We use the inductive wireless recharging to increase autonomy and decrease the sensor interference by reducing the inductor loop size. By locating four independent small receiver loops and corresponding four circuits around the quadrotor UAV, we can increase safety from circuit malfunctions in comparison to the use of just one loop. On the base station, four folding robotic bars are used to realign the receiver loops over the transmitter loops. After adequate recharging as measured by battery voltages or power consumption at the bae station, the UAV sends a signal to the base station to open the robotic bars and takes off once freed from the robotic bars.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.987-993
• /
• 2015

Wireless power transfer technologies typically include inductive coupling, magnetic resonance, and capacitive coupling methods. Among these methods, capacitive coupling wireless power transfer (CCWPT) has been studied to overcome the drawbacks of other approaches. CCWPT has many advantages such as having a simple structure, low standing power loss, reduced electromagnetic interference (EMI) and the ability to transfer power through metal barriers. In this paper, the CCWPT system with 6.78MHz class D inverter is proposed and analyzed. The proposed system consists of a 6.78MHz class D inverter with a LC low pass filter, capacitor between a transmitter and a receiver, and impedance transformers. The system is verified with a prototype for charging mobile devices.