• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5C
• /
• pp.472-478
• /
• 2010

In the environment of wireless communication system of IEEE 802.15.3a UWB standard, the angle of arrival(AOA) estimation technique for the indoor wireless positioning algorithms, based on the AOA parameter estimation which fits well for the wireless communication channel and shows high estimation accuracy, is proposed. After the UWB signal model, based on the IEEE 802.1.3a standard, is constructed, the average weighted MUSIC technique is proposed, which shows better estimation accuracy than those of conventional estimation technique. Through the simulation studies, the environment of the indoor wireless positioning system including the IEEE 802.15.3a channel is configured and we demonstrate better estimation results by the proposed AOA estimation technique than those from the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.398-400
• /
• 2014

In this letter, we propose a cross-layer technique jointly considering modulation coding schemes (MCSs) of medium access control (MAC) layer, source significance information (SSI) and error concealment unit of application (APP) layer, and channel quality information (CQI) of physical (PHY) layer. We demonstrate the improved video quality by the proposed technique when H.264 videos are streamed over Rayleigh fading wireless channels.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.105-112
• /
• 2014

The utilization of Wireless Ad Hoc Network which can build easily network using wireless device in difficult situation to build network is very good. However, it has security threat element because it transfers data by only forwarding of wireless devices. The measures against this should be prepared because damage by especially routing attack can affect the entire network. It is hard to distinguish malicious node and normal node among nodes composing network and it is not easy also to detect routing attack and respond to this. In this paper, we propose new method which detect routing attack and can respond to this. The amount of traffic in all nodes is measured periodically to judge the presence or absence of attack node on the path set. The technique that hides inspection packet to suspected node and transmits is used in order to detect accurately attack node in the path occurred attack. The experiment is performed by comparing SRAODA and SEAODV technique to evaluate performance of the proposed technique and the excellent performance can be confirmed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.814-821
• /
• 2009

In an ultrawide band (UWB) indoor wireless localization, time of arrival (TOA) parameter estimation techniques have some difficulties in acquiring a reasonable TOA estimate because of the clustered multipath components overlapping or random time intervals mainly due to non line-of-sight (NLOS) environment. In order to solve that problem and achieve an excellent UWB indoor wireless localization, we propose a UWB signal model and a robust TOA parameter estimation technique that has little effect on the clustered problems unlike the conventional technique. Through simulation studies, the validity of the proposed model and the TOA estimation technique are examined. The performance of estimation error is also analyzed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.3
• /
• pp.91-98
• /
• 2013

Node which plays the role of cache server does not exist in the wireless ad-hoc network consisting of only mobile nodes. Even if it exists, it is difficult to provide cache services due to the movement of nodes. Therefore, the cooperative cache technique is necessary in order to improve the efficiency of information access by reducing data access time and use of bandwidth in the wireless ad-hoc network. In this paper, the whole network is divided into zones which don't overlap and master node of each zone is elected. General node of each zone has ZICT and manages cache data to cooperative cache and gateway node use NZCT to manage cache information of neighbor zone. We proposed security structure which can accomplish send and receive in the only node issued id key in the elected master node in order to prepare for cache consistent attack which is vulnerability of distributed caching techniques. The performance of the proposed method in this paper could confirm the excellent performance through comparative experiments of GCC and GC techniques.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.497-498
• /
• 2007

The most of important thing when we design a Wireless Sensor Network is resources. You have to consider energy efficient operation When you design Wireless Sensor Network. Because Sensor devices have a limited resources. In this paper, we proposed energy efficiency localization technique in Wireless Sensor Network. We used Cell ID technique for location search. This method can reduce power consumption and the network life time will be extension.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4223-4249
• /
• 2015

A novel jamming detection technique to detect the presence of jamming in the downstream direction for cluster based wireless sensor networks is proposed in this paper. The proposed technique is deployed in base station and in cluster heads. The proposed technique is novel in two aspects: Firstly, whenever a cluster head receives a packet it verifies whether the source node is legitimate node or new node. Secondly if a source node is declared as new node in the first step, then this technique observes the behavior of the new node to find whether the new node is legitimate node or jammed node. In order to monitor the behavior of the existing node and new node, the second step uses two metrics namely packet delivery ratio (PDR) and received signal strength indicator (RSSI). The rationality of using PDR and RSSI is presented by performing statistical test. PDR and RSSI of every member in the cluster is measured and assessed by the cluster head. And finally the cluster head determines whether the members of the cluster are jammed or not. The CH can detect the presence of jamming in the cluster at member level. The base station can detect the presence of jamming in the wireless sensor network at CH level. The simulation result shows that the proposed technique performs extremely well and achieves jamming detection rate as high as 99.85%.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.1
• /
• pp.21-31
• /
• 2010

In this study, a technique that uses wireless impedance sensor nodes is proposed to monitor tensile force of structural cable. To achieve this goal, the following approaches were implemented. First, a wireless impedance sensor node was designed for automated and cost-efficient prestress-loss monitoring. Second, an impedance-based algorithm was embedded in the wireless impedance sensor node for autonomous structural health monitoring of structural cables. Third, a tensile force monitoring technique that uses an interface plate for structural cables was proposed to overcome the limitations of the wireless impedance sensor node such as its narrow-band measurable frequency ranges. Finally, the applicability of the wireless impedance sensor node and the technique that uses the interface washer were evaluated in a lab-scaled prestressed concrete (PSC) girder model with internal and external tendons for which several prestress-loss scenarios were experimentally monitored with the wireless impedance sensor nodes.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.341-350
• /
• 2020

In a wireless sensor network (WSN), the data transmission technique based on the cooperative multiple-input multiple-output (CMIMO) scheme reduces the energy consumption of sensor nodes quite effectively by utilizing the space-time block coding scheme. However, in networks with high node density, the scheme is ineffective due to the high degree of correlated data. Therefore, to enhance the energy efficiency in high node density WSNs, we implemented the distributed source coding (DSC) with the virtual multiple-input multiple-output (MIMO) data transmission technique in the WSNs. The DSC-MIMO first compresses redundant source data using the DSC and then sends it to a virtual MIMO link. The results reveal that, in the DSC-MIMO scheme, energy consumption is lower than that in the CMIMO technique; it is also lower in the DSC single-input single-output (SISO) scheme, compared to that in the SISO technique at various code rates, compression rates, and training overhead factors. The results also indicate that the energy consumption per bit is directly proportional to the velocity and training overhead factor in all the energy saving schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.884-891
• /
• 2006

A wireless sensor node is typically battery operated and energy constrained. Therefore it is critical to design efficient power management technique and scheduling technique. In this paper, we propose an OS-level power management technique for energy saving of wireless sensor node, it is called EA-SENTAS (Energy-Aware Sensor Node TAsk Scheduling). It can decrease the energy consumption of a wireless sensor node to use task scheduling technique that shut down components or use low power mode of each component when not needed. Simulation results show that EA-SENTAS saves energy up to 56 percent to compare with conventional duty cycle.