• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.381-384
• /
• 2002

Orthogonal Frequency Division Multiplexing (OFDM), which employs orthogonal overlapping subcarriers to modulate the signals, has been attracted much attention in recent time as a favorable option for future generation wireless networks due to its ability to overcome many impairments in wireless channels. Since OFDM is a multi-carrier system adaptive modulation techniques can be effectively and efficiently used to enhance the system performance in terms of both BER and overall system capacity. This paper discusses a COFDM-CDMA system with adaptive modulation schemes for future generation wireless networks.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3175-3177
• /
• 1999

In this study, the wireless communication system configuration and major equipments for KNGR will be introduced. Also the reliability and safety impact on the KNGR will be checked by reviewing /testing the EMI/RFI conditions of wireless communication system, The elements of the wireless communication system are radio exchange, base stations, portable telephone handsets.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1142-1143
• /
• 2007

A new scheme of dimmable ballast system for the electrodeless fluorescent lamp is proposed. The proposed scheme is composed of the conventional ballast system and the wireless communication part using an EPLD. As a result, the proposed system has a dimming control capability by wireless communication technology. In this paper, wireless dimming control system for electrodeless fluorescent lamp was introduced.

• Journal of Biosystems Engineering
• /
• v.16 no.4
• /
• pp.363-371
• /
• 1991

It is important to measure the somatic informations for stockbreeding automatization. This study was carried out for the development of wireless measurement system of temperature in living animals. New method to measure somatic temperature was developed using the single-channel wireless instrument. This system was constructed by oscillator, temperature sensor, wireless transmitter and receiver circuit, single processing circuit, and microcomputer. Two types of sensor were used and compared to measure the temperature. The thermistor sensor was more sensitive and accurate than platinum resistance sensor, however both sensors were performed efficiently. The single-channel wireless measurement systems developed could measure the somatic temperature successfully and offered a versatile system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.72-80
• /
• 2012

Binary CDMA is a new standard technology for wireless communication developed by our country that makes high speed communications and good quality of services. In this paper we researched the design and implementation methods of a wireless CCTV System based on the Binary-CDMA technology that makes it freely installed in any place without cables and laying works. We implemented the hardware and software for the CCTV system and developed a Prototype Wireless CCTV system based on the Binary-CDMA technology.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.5
• /
• pp.209-217
• /
• 2012

In the present, Wireless Sensor Network(WSN) has been used for the purpose of the military operation with surveillance systems and for collecting useful information from the natural environment. Basically, low-power, easy deployment and low cost are the most important factors to be deployed for WSNs. Lots of researches have been studied to meet those requirements, especially on the node capacity and battery lifetime improvements. Recently, the study of wireless mesh networks applied into the surveillance systems has been proceeded as a solution of easy deployment. In this paper, we proposed large-scale intelligent multi-layer surveillance systems based on QoS assuring Wireless Mesh Networks and implemented them in the real testbed environment. The proposed system explains functions and operations for each subsystem as well as S/W and H/W architectures. Experimental results are shown for the implemented subsystems and the performance is satisfactory for the surveillance system. We can identify the possibility of the implemented multi-layer surveillance system to be used in practice.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.166-171
• /
• 2010

Wired monitoring systems have been used for damage detection and dynamic analysis of large structures(bridges, dams, plants, etc.). However, the real-world applications still remain limited, mainly due to time and cost issues inherent to wired systems. In recent years, an increasing number of researchers have adopted WSN(wireless sensor network) technologies to the field of SHM(structural health monitoring). Accurate time synchronization is most critical for the wireless approach to be feasible for SHM purpose, along with sufficient wireless bandwidth and highly precise measuring resolution. To satisfy technical criteria stated above, a wireless vibration monitoring system that uses high-precision MEMS(micro-electro-mechanical system) sensors and A/D convertor is discussed in detail. It was found experimentally that the level of time synchronization fell within $200\;{\mu}sec$.

• Broadcasting and Media Magazine
• /
• v.11 no.1
• /
• pp.78-85
• /
• 2006

Cognitive radio is a paradigm for wireless communication in which either network of wireless node itself changes particular transmission or reception parameters to execute its tasks efficiently without interfering with the licensed users. This paper represents a performance of the cognitive radio technology on dual polarized MIMO system using six-port receiver. Six-port technology is well known direct conversion receiver. In this paper, a six-port phase discriminator based polarization signal separation is shown. That is, the SER(Symbol Error Rate) performance is improved using polarization separator and simple receiver architecture is proposed applying six-port receiver. The six-port technology has priority to adapt changeable frequency system and variable environments for cognitive radio. In general, dual polarized MIMO system has good capacity and quality using polarization separator [1].

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.131-139
• /
• 2007

The recent advance in wireless network technologies has enabled the streaming media service on the mobile devices such as PDAs and cellular phones. Since the wireless network has low bandwidth channels and mobile devices are actually composed of limited hardware specifications, the transcoding technology is needed to adapt streaming media to given mobile devices. Futhermore owing to the diversity of bandwidth in the wireless network by reason of mobile users' movements and environments, it is difficult to provide stable QoS. In this paper, the autonomic multimedia transcoding system is proposed in order for users to provide network adaptive QoS. Our proposed system is based on the estimation of available bandwidth in wireless network for seamless multimedia streaming service. The proposed system is designed and implemented for various mobile clients. In experiments, we evaluate its seamless multimedia streaming and the adaptation transcoding bit rate according to the changes of bandwidth in wireless network.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.1
• /
• pp.51-55
• /
• 2008

A digital home is a ubiquitous environment that is expected to be realized in the near future. All information appliances in a house are connected to each other through wired and/or wireless home networks. Authenticated user can access the various services provided by the digital home, and the access is not restricted by equipment, time, or location. The technologies that form the digital home can be grouped into two categories: wired networking technologies and wireless networking technologies. For the purpose of ubiquitous environments, wireless-networks offer suitable and seamless high-quality services. A wireless LAN can be created simply by equipping a single access point. For that reason, the cost of establishing such a network is low and using it is easy. Of course, there is an exciting new wireless technology. It is the Ultra Wide Band (UWB). However, it is not enough to bring wireless convenience, although offering a broad range of high-speed data transfer capabilities, Because of unstable. Thus, of the wireless-networking systems, we focus on the wireless LAN. We quantitatively analyze its capabilities. The dynamic and adaptive wireless LAN provides a foundation for the evolution toward the next generation of wireless and adaptive networks. The difference between wired LAN and wireless LAN in upload and download rates is small. Although the wireless LAN experiences a greater loss rate than the wired LAN, the difference is minimal. We conclude that a wireless LAN is suitable for use in an apartment environment.