• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.8
• /
• pp.1913-1925
• /
• 2012

In order to efficiently utilize limited radio resources, resource allocation schemes in OFDMA-based wireless networks have gained intensive attention recently. Instead of improving the throughput performance, the utility is adopted as the metric for resource allocation, which provides reasonable methods to build up the relationship between user experience and various quality-of-service (QoS) metrics. After formulating the optimization problem by using a weighted bipartite graph, a modified bipartite matching method is proposed to find a suboptimal solution for the resource allocation problem in OFDMA-based wireless systems with feasible computational complexity. Finally, simulation results are presented to validate the effectiveness of the proposed method.

• Journal of Platform Technology
• /
• v.10 no.4
• /
• pp.47-55
• /
• 2022

Recently, diverse devices using different wireless technologies are gradually increasing in the IoT environment. In particular, it is essential to design an efficient feature extraction approach and detect the exact types of radio signals in order to accurately identify various radio signal modulation techniques. However, it is difficult to gather labeled wireless signal in a real environment due to the complexity of the process. In addition, various learning techniques based on deep learning have been proposed for wireless signal classification. In the case of deep learning, if the training dataset is not enough, it frequently meets the overfitting problem, which causes performance degradation of wireless signal classification techniques using deep learning models. In this paper, we propose a generative adversarial network(GAN) based on data augmentation techniques to improve classification performance when various wireless signals exist. When there are various types of wireless signals to be classified, if the amount of data representing a specific radio signal is small or unbalanced, the proposed solution is used to increase the amount of data related to the required wireless signal. In order to verify the validity of the proposed data augmentation algorithm, we generated the additional data for the specific wireless signal and implemented a CNN and LSTM-based wireless signal classifier based on the result of balancing. The experimental results show that the classification accuracy of the proposed solution is higher than when the data is unbalanced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9A
• /
• pp.896-905
• /
• 2010

In this paper, we present a new sensing method based on phase entropy. Entropy is a measurement which quantifies the information content contained in a signal. For the PSK modulation, the information is encoded in the phase of the transmitted signal. By focusing on phase, more information is collected during sensing, which suggests a superior performance. The sensing based on Phase entropy is not limited to PSK signal. We generalize it to PAM signal as well. It is more advantageous to detect the phase. The simulation results have confirmed the excellent performance of this novel sensing algorithm.

• Journal of Information Processing Systems
• /
• v.19 no.3
• /
• pp.377-384
• /
• 2023

The existence of abnormal breakpoint data leads to poor channel balance in wireless sensor networks (WSN). To enhance the communication quality of WSNs, a method for positioning abnormal breakpoint data in WSNs on the basis of signal reconstruction is studied. The WSN signal is collected using compressed sensing theory; the common part of the associated data set is mined by exchanging common information among the cluster head nodes, and the independent parts are updated within each cluster head node. To solve the non-convergence problem in the distributed computing, the approximate term is introduced into the optimization objective function to make the sub-optimization problem strictly convex. And the decompressed sensing signal reconstruction problem is addressed by the alternating direction multiplier method to realize the distributed signal reconstruction of WSNs. Based on the reconstructed WSN signal, the abnormal breakpoint data is located according to the characteristic information of the cross-power spectrum. The proposed method can accurately acquire and reconstruct the signal, reduce the bit error rate during signal transmission, and enhance the communication quality of the experimental object.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.6
• /
• pp.55-62
• /
• 2016

In this paper, we present indoor positioning technologies using the wireless signal categorizing them into triangulation based, fingerprinting based, and cell ID based technologies. We describe several representative techniques for each of them emphasizing their strengths and weaknesses. We define important performance issues for indoor positioning technologies and analyze recent technologies according to the performance issues. We believe that this paper provide wise view and necessary information for recent indoor positioning technologies using wireless signals.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1999-2005
• /
• 2005

Collaboration in wireless sensor networks must be fault-tolerant due to the harsh environmental conditions in which such networks can be deployed. This paper focuses on finding signal processing algorithms for collaborative target detection based on the generalized approach to signal processing in the presence of noise that are efficient in terms of communication cost, precision, accuracy, and number of faulty sensors tolerable in the wireless sensor network. Two algorithms, namely, value fusion and decision fusion constructed according to the generalized approach to signal processing in the presence of noise, are identified first. When comparing their performance and communication overhead, decision fusion is found to become superior to value fusion as the ratio of faulty sensors to fault free sensors increases. The use of the generalized approach to signal processing in the presence of noise under designing value and decision fusion algorithms in wireless sensor networks allows us to obtain the same performance, but at low values of signal energy, as under the employment of universally adopted signal processing algorithms widely used in practice.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.65-67
• /
• 2004

Change of state of Channel between two wireless terminals which is caused by noise and multiple environmental conditions for happens frequently from the Wireles Network. So, When it is like that planning a wireless network protocol or performance analysis, it follows to change of state of time-varying channel and packet the analysis against a transmission efficiency is necessary. In this paper, analyzes transmission time of a packet and a packet in a time-varying and packet based Wireless Network. To reflecte the feature of the time-varying channel, we use a Signal Flow Graph model. From the model the mean of transmission time and the mean of queue length of the packet are analyzed in terms of the packet distribution function, the packet transmission service time, and the PER of the time-varying channel.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.797-800
• /
• 2011

The objective of MPEG Media Transport (MMT), which is on going standard, is to develop efficient delivery of media over packet based networks in an adaptive, progressive, download/streaming fashion over various IP based networks, including terrestrial, satellite and cable broadcast networks. In this paper we introduce utilization of signal strength information based on Cross Layer Design(CLD) to efficient multimedia delivery over wireless network in which in practice the wireless conditions can vary significantly. Many recent studies have shown that a significant improvement in wireless video throughput can be achieved by utilizing signal strength information on CLD [1][2]. Despite of its usefulness, however, it was difficult to employ signal strength information in rate adaptation applications due to different representation of signal strength information for each underlying wireless network. To that end, we proposed syntax and semantics of signal strength information in such a way that the information can be interpreted in the unified way. The proposed signal strength information was proposed for the MMT standardization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3858-3874
• /
• 2021

As an essential part of the urban transportation system, precise perception of the traffic flow parameters at the traffic signal intersection ensures traffic safety and fully improves the intersection's capacity. Traditional detection methods of road traffic flow parameter can be divided into the micro and the macro. The microscopic detection methods include geomagnetic induction coil technology, aerial detection technology based on the unmanned aerial vehicles (UAV) and camera video detection technology based on the fixed scene. The macroscopic detection methods include floating car data analysis technology. All the above methods have their advantages and disadvantages. Recently, indoor location methods based on wireless signals have attracted wide attention due to their applicability and low cost. This paper extends the wireless signal indoor location method to the outdoor intersection scene for traffic flow parameter estimation. In this paper, the detection scene is constructed at the intersection based on the received signal strength indication (RSSI) ranging technology extracted from the wireless signal. We extracted the RSSI data from the wireless signals sent to the road side unit (RSU) by the vehicle nodes, calibrated the RSSI ranging model, and finally obtained the traffic flow parameters of the intersection entrance road. We measured the average speed of traffic flow through multiple simulation experiments, the trajectory of traffic flow, and the spatiotemporal map at a single intersection inlet. Finally, we obtained the queue length of the inlet lane at the intersection. The simulation results of the experiment show that the RSSI ranging positioning method based on wireless signals can accurately estimate the traffic flow parameters at the intersection, which also provides a foundation for accurately estimating the traffic flow state in the future era of the Internet of Vehicles.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.655-665
• /
• 2012

Based on wideband precoding (WBP) in the multiple-input multiple-output orthogonal frequency division multiplexing system, an adaptive nonuniform codebook is presented in this paper. The relationship between the precoder distribution and spatial correlation is analyzed at first. A closed-form expression based on overlapped isosceles triangles is proposed as an approximation of the precoder distribution. Then, the adaptive codebook design is derived with the approximate distribution to minimize quantization errors. The capacity and bit error rate performance demonstrate that the adaptive codebook with WBP outperforms the conventional fixed uniform codebook.