• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8S
• /
• pp.2608-2619
• /
• 2000

This paper proposes the Handover Scheme for the mobile and describes the result of the performance analysis. In the conventional scheme of handover request, the withdrawal of terminal may occur because handover request is performed based on fixed signal level without considering network load and terminal mobility. The proposed scheme offers the minimization of withdrawal and handover blocking probability by means of the handover request of terminal based on the network load and terminal mobility. Conventional handover scheme has the sequential procedure that network performs resource check and path rerouting on the handover by MT(Mobile Terminal). Proposed handover scheme pre-processes the resource check before the handover request by predicting the handover request timo so that handover latency can be reduced. Moreover, path optimization is executed after the completion of handover in order to reduce handover latency. The rdduction of handover latency prevents the dropping of service by minimizing backward handover blocking. In summary, we propose the prediction of handover request time and decision method based on terminal, validating the performance of proposed scheme considering various cases of simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.871-880
• /
• 1999

In this paper, a pseudo-noise(PN) tracking and demodulation circuits are analyzed and designed for a direct-sequence/spread-spectrum multiple access system under a mobile fading channel. We consider noncoherent delay locked loop(DLL) as a PN code tracking loop which has 1/8 PN chip resolution. The tracking performance of DLL is evaluated in terms of locking time from a loose state and tracking jitter. The received signal is demodulated to original data by despreading with PN code locked by DLL. Also the designed circuit supports sound service of 32Kbps and in-band signal with 4.096MHz chip clock. The circuits are implemented and verified with FPGA, which is shown completely data recovery under AWGN 7dB and will be available for IMT-2000.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.264-273
• /
• 2009

For IEEE 802.15.3 HR-WPAN, we propose the DABL algorithm that PNC can allocate the channel times to the DEV in super frame in order that system frame throughput is increased and the delay is decreased. In detail, the DABL algorithm allows to dynamically allocate channel time as well as to adaptively apply the modulation and coding scheme based on the link quality of the DEV. In addition, due to the facts that QoS is quite different depending on service types, we provide the DABL algorithm taking into account RT(Real Time) traffic and Non-RT traffic respectively. Finally, we show simulation results of the DABL algorithm compared to the conventional algorithm that the PNC equally allocates channel times to the DEV regardless of the link quality of the DEV.

• Convergence Security Journal
• /
• v.8 no.1
• /
• pp.35-42
• /
• 2008

While an information system and administration for an application that a user contacts with raise a head by an important problem, a system approach and methodology for administration are mentioned. Authentication technology of various configuration is used, but non-efficiency by complicated authentication administration and operation inappropriate use are for a successful expansion of various and new business of wire/wireless environment. In addition, under the mobile computer environment with different authentic method each other, it is difficult at all to expect flexible and continuous service. Under the ubiquitous computing environment, It is very important thing plan to research and develop compatibility and the side of variance authentication plan that preservation characteristics are helped. Hereby, This paper look around an requirement items and authority mechanism for the administration and the operation mechanism of the distributed authentication considering expansion possibility of the ubiquitous computing environment not only fixed computing environment but also mobile computing. In future, we expect it by can guide positive participation about distributed authentication technique of the genuine ubiquitous environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1128-1137
• /
• 2007

Recently, according to being advanced internet, mobile communication technique, Telematics environment which users in vehicle can use internet service in LAN(Local Area Network) via mobile device has being realized. In this paper, we propose the remote user authentication protocol to solve these issues. Additionally, we use biometrics(fingerprint) for our user authentication protocol cause it can provide to avoid critical weakness that can be lost, stolen, or forgotten and to make authentication easily. In our user authentication protocol, to protect the biometric we use session key which is generated from master key distributed in our key distribution protocol. In particular, we propose secure protocol between APs considering weakness of security in mobile environment. Based on implementation of our proposed protocol, we conform that our proposed protocols are secure from various attack methods and provide real-time authentication.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.76-81
• /
• 2016

The Internet of Things (IoT) interconnects every device by allowing them to communicate directly and share information with each other and has been recently applied to various industrial fields. The integration of home appliances with IoT has led to the creation of new markets by providing quick and better experience to consumers. Although IoT has been integrated into most modern day appliances, there have been few developments for kitchen appliances. This paper presents the development of integrating IoT with the blender, one of the most widely used appliance in the kitchen. A custom application was made to interact with the blender that provides three main functions: digital controller, maintenance, and defrosting alarm. The function of digital controller provides wireless control to the conventional blender. The maintenance function detects and alerts the user on blender reliability with the intent of enabling the anticipation of hardware failures. The defrost alarm alerts the user when the ingredient has reached the appropriate and desired temperature when cooking frozen food.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.4
• /
• pp.77-82
• /
• 2016

IoT technology was selected as one of IT 10 strategic technologies by gartner from 2013 to 2015, and implements advanced smart society while enabling interaction between people and things. Because IoT devices are connected to the Internet, they are involved in issues including exposure of private lives, for example, hacking to result in wireless signal interference, data theft, data modification and forgery and service denial, and critical security issues including threat to national confidential information and facilities. This study aims to suggest a method for examining threats to security through IP exposure of IoT devices and examining related problems to minimize threats to security through IP exposure including exposure of private lives or damages to the national infrastructure system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.19-30
• /
• 2009

Recent development in wireless communication technology and mobile equipment like PDA, cellular phone and GPS makes location-based services (LBSs) popular. However, because, in the LBSs, users continuously request a query to LBS servers by using their exact locations, privacy information could be in danger. Therefore, a mechanism for users' privacy protection is required for the safe and comfortable use of LBSs by mobile users. For this, this paper propose a grid-based cloaking area creation scheme supporting continuous LBSs. The proposed scheme creates a cloaking area rapidly by using grid-based cell expansion to efficiently support the continuous LBSs. In addition, to generate a cloaking area which makes the exposure probability of a mobile user to a minimum, we compute a privacy protection degree by granting weights to mobile users. Finally, we show from a performance analysis that our cloaking scheme outperforms the existing cloaking schemes, in terms of service time, privacy protection degree.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.79-88
• /
• 2020

This study analyzes the issue of the supply of force of fire in the high-rise buildings, and proposes an efficient method to do so. The results are as follows. First, in terms of Detect fire, it is necessary to shorten force of fire supply time by diversifying fire alarms such as alarms, vibrations, and voices from outside, clarification of fire occurrence points, and marking of fire. Second, with regard to communication signals, strengthening the installation target of wireless communication auxiliary facilities, supplementing the installation of repeaters, and constructing a multicommunications network were proposed. Third, in terms of Decide action, it is necessary to supply firefighter and firefighting equipment with the method of crossing of a river in adjacent buildings. Fourth, in terms of Respond to site, helicopters and emergency elevators are used to assist in the supply of firefighting equipment using drones. Easy-to-break glass windows and identification marks are required in every floor. Finally, in terms of applying fire suppressants, water can be supplied by means of a helicopter adjacent to the structure.