• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.457-465
• /
• 2008

HL7(Health Level 7) is a standard for exchanging medical and healthcare data among different medical information systems. As the ubiquitous era is coming, in addition to text and imaging information, a new type of data, i.e., streaming sensor data appear. Since the HL7 is not covering the interfaces among the devices that produces sensor data, it is expected that sooner or later the HL7 needs to include the biomedical sensors and sensor networks. The IEEE 1451 is a family of standards that deals with the sensors, transducers including sensors and actuators, and various wired or wireless sensor networks. In this paper, we consider the possibility of interoperability between the IEEE 1451 and HL7. After we propose a format of messages in HL7 to include the IEEE 1451 TEDS, we present some preliminary results that show the possibility of integrating the two standards.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.299-309
• /
• 2011

Energy consumption is a key issue in body sensor networks (BSNs) since energy-constrained sensors monitor the vital signs of human beings in healthcare applications. In this paper, packet size optimization for BSNs has been analyzed to improve the efficiency of energy consumption. Existing studies on packet size optimization in wireless sensor networks cannot be applied to BSNs because the different operational characteristics of nodes and the channel effects of in-body and on-body propagation cannot be captured. In this paper, automatic repeat request (ARQ), forward error correction (FEC) block codes, and FEC convolutional codes have been analyzed regarding their energy efficiency. The hop-length extension technique has been applied to improve this metric with FEC block codes. The theoretical analysis and the numerical evaluations reveal that exploiting FEC schemes improves the energy efficiency, increases the optimal payload packet size, and extends the hop length for all scenarios for in-body and on-body propagation.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.459-464
• /
• 2010

Due to the application-specific nature of wireless sensor networks, the sensitivity to such a requirement as data reporting latency may vary depending on the type of applications, thus requiring application-specific algorithm and protocol design paradigms which help us to maximize energy conservation and thus the network lifetime. In this paper, we implement and evaluate a novel delay-adaptive sensor scheduling scheme for energy-saving data gathering which is based on a two phase clustering (TPC), in wireless sensor networks. The TPC is implemented on sensor Mote hardwares. With the help of TPC implemented, sensors selectively use direct links for control and forwarding time critical sensed data and relay links for data forwarding based on the user delay constraints given. Implementation study shows that TPC helps the sensors to increase a significant amount of energy while collecting sensed data from sensors in a real environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1928-1934
• /
• 2009

This paper proposes a power management scheme for sensor nodes in wireless sensor networks based on sensor node operating system supporting the sensor transparency, which can turn off the sensors when the MCU is in sleep mode. We classify the sensors in two types, that is, event sensors and polling sensors, to be able to decide whether the sensor is a type of sensors whose power supply can be turned off or not, and we design a new scheduler to support recognition of those different types of sensors. Implementing and evaluation of the scheduler and the power manager supporting sensor transparency are shown based on Nano-Q+.

• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.18-27
• /
• 2013

Real-time monitoring is one of the prime necessities in a weapon flight test that is required for the efficient and timely collection of large amounts of high-rate sampled data acquired by an event-trigger. The wireless sensor network is a good candidate to resolve this requirement, especially considering the inhospitable environment of a weapon flight test. In this paper, we propose a priority based multi-channel MAC protocol with CSMA/CA over a single radio for a real-time monitoring of a weapon flight test. Multi-channel transmissions of nodes can improve the network performance in wireless sensor networks. Our proposed MAC protocol has two operation modes: Normal mode and Priority Mode. In the normal mode, the node exploits the normal CSMA/CA mechanism. In the priority mode, the node has one of three grades - Class A, B, and C. The node uses a different CSMA/CA mechanism according to its grade that is determined by a signal level. High grade nodes can exploit more channels and lower backoff exponents than low ones, which allow high grade nodes to obtain more transmission opportunities. In addition, it can guarantee successful transmission of important data generated by high grade nodes. Simulation results show that the proposed MAC exhibits excellent performance in an event-triggered real-time application.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.990-1013
• /
• 2015

Deploying sensors into a target region is a key issue to be solved in building a wireless sensor network. Various deployment algorithms have been proposed by the researchers, and most of them are evaluated under the ideal conditions. Therefore, they cannot reflect the real environment encountered during the deployment. Moreover, it is almost impossible to evaluate an algorithm through practical deployment. Because the deployment of sensor networks require a lot of nodes, and some deployment areas are dangerous for human. This paper proposes a deployment approach to solve the problems mentioned above. Our approach relies on the satellite images and the Virtual Force Algorithm (VFA). It first extracts the topography and elevation information of the deployment area from the high resolution satellite images, and then deploys nodes on them with an improved VFA. The simulation results show that the coverage rate of our method is approximately 15% higher than that of the classical VFA in complex environment.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2009

Localization of nodes is a key technology for application of wireless sensor network. Having a GPS receiver on every sensor node is costly. In the past, several approaches, including range-based and range-free, have been proposed to calculate positions for randomly deployed sensor nodes. Most of them use some special nodes, called anchor nodes, which are assumed to know their own locations. Other sensors compute their locations based on the information provided by these anchor nodes. This paper uses a single mobile anchor node to move in the sensing field and broadcast its current position periodically. We provide a weighted centroid localization algorithm that uses coefficients, which are decided by the influence of mobile anchor node to unknown nodes, to prompt localization accuracy. We also suggest a criterion which is used to select mobile anchor node which involve in computing the position of nodes for improving localization accuracy. Weighted centroid localization algorithm is simple, and no communication is needed while locating. The localization accuracy of weighted centroid localization algorithm is better than maximum likelihood estimation which is used very often. It can be applied to many applications.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.2
• /
• pp.105-113
• /
• 2007

Accurate and low-cost sensor localization is a critical requirement for the deployment of wireless sensor networks in a wide variety of application. Sensor position is used for its data to be meaningful and for energy efficient data routing algorithm especially geographic routing. The previous works for sensor localization utilize global positioning system(GPS) or estimate unknown-location nodes position with help of some small reference nodes which know their position previously. However, the traditional localization techniques are not well suited in the senor network for the cost of sensors is too high. In this paper, we propose the sensor localization method with a mobile robot, which knows its position, moves through the sensing field along pre-scheduled path and gives position information to the unknown-location nodes through wireless channel to estimate their position. We suggest using the sensor position estimation method and an efficient mobility path model. To validate our method, we carried out a computer simulation, and observed that our technique achieved sensor localization more accurately and efficiently than the conventional one.

• Journal of Internet Computing and Services
• /
• v.9 no.6
• /
• pp.99-107
• /
• 2008

Wireless sensor networks (WSN) based on low-power technologies become important portion of ubiquitous systems. In this paper, we introduce a WSN-based welfare management system as one of the WSN applications. Especially, we implement S-MAC (Sensor Medium Access control) protocol on our system that saves both cost and power consumption, and we evaluate system performances using the TOSSIM simulator. Sensors and a small database server are placed in the house of participant, which collects and stores some environment conditions of the house. The small servers are connected to each others by wireless ad-hoc network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.106-116
• /
• 2010

Sensor deployment makes an effect on not only covering of the interesting area but also reliable data acquisition and efficient resource management of sensor, so that sensors must be deployed at their better place. In traditional static wireless sensor networks, however, it is impossible to deploy the sensors manually when they are distributed in unexploited, hostile, or disaster areas. Therefore, if each sensor has locomotion capability, it can re-deploy itself using the location information of neighbor sensors. In our previous study, we showed that moving sensors to the centroids of their Voronoi polygon is efficient for extending the coverage area. In this paper, we present an improved potential-field-based sensor self-deployment scheme by combining the centroid of Voronoi polygon with the traditional potential-field scheme. Simulation results show that our scheme can achieve higher coverage in shorter time and less movement than the traditional potential-field scheme.