• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.371-376
• /
• 2016

A self-powered piezoelectric energy harvester was developed for the application in wireless sensor node. The energy harvester was evaluated with power generation characteristics for the wireless sensor node for structural diagnosis of the electric power system. The self-powered wireless sensor node was set to measure temperature, vibration frequency of the electric power system. A piezoelectric harvester composed of 7 uni-morph cantilevers (functionalized as 6 generators and 1 vibration sensor) was connected to be an array and revealed to produce significantly high output power of approximately 10 mW at 120 Hz under 3.4 g((1 g = $9.8m/sec^2$). The wireless sensor node could work as the electric power generated by the developed piezoelectric harvester.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1357-1372
• /
• 2017

Energy harvesting techniques, particularly radio frequency energy harvesting (RF-EH) techniques, which are known to provide feasible solutions to enhance the performance of energy constrained wireless communication systems, have gained increasing attention. In this paper, we consider a wireless-powered cooperative communication network (WPCCN) for transferring energy in the downlink and forwarding signals in the uplink. The objective is to maximize the average transmission rate of the system, subject to the total network power constraint. We formulate such a problem as a form of wireless energy transmission based on resource allocation that searches for the joint subcarrier pairing and the time and power allocation, and this can be solved by using a dual approach. Simulation results show that the proposed joint optimal scheme can efficiently improve system performance with an increase in the number of subcarriers and relays.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.353-361
• /
• 2015

Objective : The aim of this study was to develop the non-powered horse riding device and was to evaluate the elaborate its applicability throughout static structural and transient structural analysis of the outdoor core strength exercise equipment. Method : Fifteen college students (mass: $69.55{\pm}13.38kg$, height: $1.69{\pm}5.61m$, age: $21.42{\pm}1.83yrs$) rode the powered horse riding device and 14 college students (mass: $71.12{\pm}9.74kg$, height: $1.73{\pm}3.31m$, age: $22.50{\pm}1.47yrs$) rode the non-powered horse riding device for the comparison. All motion capture data was collected at 100 Hz using six infrared cameras and the muscular activities were collected using a Delsys Trigno wireless system. The peak forward/backward lean angle, range of motion anter/posterior and vertical COM(Center of mass) movement of trunk and pelvis segment, and muscle activities of six muscles were compared between the two devices by using independent t-test (p<.05). Results : Several kinematic variables (peak forward-backward lean angle and vertical COM movement of trunk and pelvis segment, range of motion of trunk) significantly different between non-powered and powered horse riding device. The muscle activities of Rectus abdominis and External oblique of abdomen on the non-powered horse riding device were significantly greater than those of the powered device. Conclusion : It was concluded that non-power horse riding device could give the effect of core strength exercise as well as the body motion which can simulate the powered horse riding device.

• Journal of Periodontal and Implant Science
• /
• v.39 no.4
• /
• pp.407-412
• /
• 2009

Purpose: This study was performed to evaluate the effect of powered toothbrush with a wireless remote display on the subjective and objective oral hygiene improvement. Methods: One hundred and fifteen subjects in healthy or mild gingivitis status between the ages of 20 and 90 were recruited and reviewed for study inclusion criteria. At first visit, 115 pre-screened subjects filled in the questionnaire form which consisted of demographic factors, behavioral factors (smoking, alcohol consumption), toothbrushing habits (brushing time and frequency), self-reported oral health status, and self-satisfaction. Baseline clinical indices (Plaque index, Gingival index) were also recorded by a periodontist. Subjects were instructed how to use powered toothbrush with a wireless remote display, and were provided with it. Thirty days after first visit, 90 subjects returned for the second assessment by self-reported questionnaire form and professional clinical checkup. Statistical analysis was performed using paired t-test for the difference between baseline and second visit data. The relationship among variables was examined with chi-square test and Fisher' s exact test. Results: Significant differences were not found on self-reported satisfaction related with sex, smoking, alcohol consumption (P<0.05). Self-reported tooth brushing habit was improved in the aspect of brushing time and frequency. Significant differences were found on the self-reported oral health status, self-satisfaction, and clinical indices between the baseline and second visit data (P<0.01). Clinical indices were significantly reduced after using powered toothbrush with a wireless remote display (P<0.01). No adverse reactions were reported during the study period. Conclusions: Powered toothbrush with a wireless remote display successfully promoted oral hygiene from the subjective and objective viewpoint after 30 days of home usage.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1430-1440
• /
• 2015

In contrast with battery-based wireless sensor networks (WSNs), solar-powered WSNs can operate for a longtime assuming that there is no hardware fault. Meanwhile, a mobile sink can save the energy consumption of WSN, but its ineffective movement may incur so much energy waste of not only itself but also an entire network. To solve this problem, many approaches, in which a mobile sink visits only on clustering-head nodes, have been proposed. But, the clustering scheme also has its own problems such as energy imbalance and data instability. In this study, therefore, a cluster-based energy-aware data-sharing scheme (CE-DSS) is proposed to effectively support a mobile sink in a solar-powered WSN. By utilizing the redundant energy efficiently, CE-DSS shares the gathered data among cluster-heads, while minimizing the unexpected black-out time. The simulation results show that CE-DSS increases the data reliability as well as conserves the energy of the mobile sink.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.105-111
• /
• 2020

In this paper, we propose a scheme that minimizes the energy imbalance problem of solar-powered wireless sensor network (SP-WSN) using both a mobile sink capable of wireless power transfer and an efficient clustering scheme (including cluster head election). The proposed scheme charges the cluster head using wireless power transfer from a mobile sink and mitigates the energy hotspot of the nodes nearby the head. SP-WSNs can continuously harvest energy, alleviating the energy constraints of battery-based WSN. However, if a fixed sink is used, the energy imbalance problem, which is energy consumption rate of nodes located near the sink is relatively increased, cannot be solved. Thus, recent research approaches the energy imbalance problem by using a mobile sink in SP-WSN. Meanwhile, with the development of wireless power transmission technology, a mobile sink may play a role of energy charging through wireless power transmission as well as data gathering in a WSN. Simulation results demonstrate that increase the amount of collected data by the sink using the proposed scheme.

• Smart Structures and Systems
• /
• v.3 no.1
• /
• pp.1-22
• /
• 2007

The energy efficiency of a self-powered wireless sensing system for pressure monitoring in injection molding is analyzed using Bond graph models. The sensing system, located within the mold cavity, consists of an energy converter, an energy modulator, and a ultrasonic signal transmitter. Pressure variation in the mold cavity is extracted by the energy converter and transmitted through the mold steel to a signal receiver located outside of the mold, in the form of ultrasound pulse trains. Through Bond graph models, the energy efficiency of the sensing system is characterized as a function of the configuration of a piezoceramic stack within the energy converter, the pulsing cycle of the energy modulator, and the thicknesses of the various layers that make up the ultrasonic signal transmitter. The obtained energy models are subsequently utilized to identify the minimum level of signal intensity required to ensure successful detection of the ultrasound pulse trains by the signal receiver. The Bond graph models established have shown to be useful in optimizing the design of the various constituent components within the sensing system to achieve high energy conversion efficiency under a compact size, which are critical to successful embedment within the mold structure.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.4
• /
• pp.77-82
• /
• 2020

Wireless sensor networks (WSNs) suffer from not only a short lifetime due to limited energy but also an energy imbalance between nodes close to the sink and others. In order to fundamentally solve the short lifetime, recent studies utilize the environmental energy such as solar power. Additionally, WSNs using mobile sinks are being studied to address the energy imbalance problem. This paper proposes an improved CTP (Collection Tree Protocol) scheme which uses these two approaches simultaneously. Basically, it is based on a CTP scheme which is a very popular data collection strategy designed for the typical battery-based WSNs with a fixed sink. Therefore, we tailored it for solar-powered WSNs with a mobile sink. Performance verification confirms that our scheme reduces the number of blackout nodes significantly compared to the typical CTP, thus increases the amount of data collected by the sink.

• KIISE Transactions on Computing Practices
• /
• v.23 no.2
• /
• pp.122-127
• /
• 2017

The data link layer operates reliable internode communication in the OSI reference model. Generally, the forward error correction (FEC) method is used in the data link layer of the wireless sensor network (WSN) environment that has a high frequency of errors. However, the FEC method consumes a significant amount of energy due to its high error correction rate, which negatively affects the networks' lifespan. In contrast with battery-based technology, energy is regularly recharged in the solar-powered WSN to meet higher energy needs than required for basic operation of existing nodes. By efficiently utilizing this surplus energy, the proposed energy-aware FEC method can reduce the data loss rate with no decrement of the network lifetime. The method employs a trade-off relationship between the energy and data loss rate by adjusting the parity length in the FEC method to the energy state in each node. The performance of the proposed scheme was verified through a simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.33-40
• /
• 2017

In this paper, we propose a sink-location management and data-routing scheme to effectively support the mobile sink in solar-powered WSN. Battery-based wireless sensor networks (WSNs) have a limited lifetime due to their limited energy, but solar energy-based WSNs can be supplied with energy periodically and can operate forever. On the other hand, introduction of mobile sink in WSNs can solve some energy unbalance problem between sink-neighboring nodes and outer nodes which is one of the major challenges in WSNs. However, there is a problem that additional energy should be consumed to notify each sensor node of the location of the randomly moving mobile sink. In the proposed scheme, one of the nodes that harvests enough energy in each cluster are selected as the cluster head, and the location information of the mobile sink is shared only among the cluster heads, thereby reducing the location management overhead. In addition, the overhead for setting the routing path can be removed by transferring data in the opposite direction to the path where the sink-position information is transferred among the heads. Lastly, the access node is introduced to transmit data to the sink more reliably when the sink moves frequently.