• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.49-50
• /
• 2017

In a two-dimensional wireless power transfer system, the mutual inductance angle is the most important parameter for determining the power transmission efficiency. This paper presents a technique to estimate the mutual inductance angle from the voltage and current information of the transmitting (Tx) coils. The equation to estimate the mutual inductance angle is derived, and the validity of the proposed method is verified through simulation and experiment.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.381-382
• /
• 2012

Wireless power transfer (WPT) system studied recently is very attractive because it removes power cables from home appliances, office equipment and battery chargers for electric vehicle. In this paper a pickup design method based on a conventional design method is proposed. A prototype pickup system designed according to the proposed method is constructed and tested, and its validness is verified.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.121-128
• /
• 2023

To increase the lifetime of the network in wireless sensor networks, energy harvesting from the surrounding environment or wireless power transfer is being used. In addition, to reduce the energy imbalance and increase the amount of data gathered, a method using mobile sink nodes that visit sensor nodes to gather data has been used. In this paper, we propose a technique to reduce the load on the relay node and collect a lot of data evenly in this environment. In the proposed scheme, sensor nodes construct Minimum Depth Trees (MDTs) considering the network environment and energy, and allocate the data collection amount. Simulation results show that the proposed technique effectively suppresses energy depletion and collects more data compared to existing techniques.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1206-1218
• /
• 2016

This article proposes a highly reliable power and communication system that guarantees the protection of essential instruments in a nuclear power plant under a severe accident. Both power and communication lines are established with not only conventional wired channels, but also the proposed wireless channels for emergency reserve. An inductive power transfer system is selected due to its robust power transfer characteristics under high temperature, high pressure, and highly humid environments with a large amount of scattered debris after a severe accident. A thermal insulation box and a glass-fiber reinforced plastic box are proposed to protect the essential instruments, including vulnerable electronic circuits, from extremely high temperatures of up to $627^{\circ}C$ and pressure of up to 5 bar. The proposed wireless power and communication system is experimentally verified by an inductive power transfer system prototype having a dipole coil structure and prototype Zigbee modules over a 7-m distance, where both the thermal insulation box and the glass-fiber reinforced plastic box are fabricated and tested using a high-temperature chamber. Moreover, an experiment on the effects of a high radiation environment on various electronic devices is conducted based on the radiation test having a maximum accumulated dose of 27 Mrad.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.389-399
• /
• 2021

In this paper, we propose one-bit feedback-based distributed beamforming (DBF) techniques for simultaneous wireless information and power transfer in interference channels where the information transfer and power transfer networks coexist in the same frequency spectrum band. In a power transfer network, multiple distributed energy transmission nodes transmit their energy signals to a single energy receiving node capable of harvesting wireless radio frequency energy. Here, by considering the Internet-of-Things sensor network, the energy harvesting/information decoding receivers (ERx/IRx) can report their status (which may include the received signal strength, interference, and channel state information) through one-bit feedback channels. To maximize the amount of energy transferred to the ERx and simultaneously minimize the interference to the IRx, we developed a DBF technique based on one-bit feedback from the ERx/IRx without sharing the information among distributed transmit nodes. Finally, the proposed DBF algorithm in the interference channel is verified through the simulations and also implemented in real time by using GNU radio and universal software radio peripheral.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.36-45
• /
• 2010

In this paper, we propose a new design method to design a wireless power transfer system using loop antennas for consumer electronics. This method can simply design a wireless power transfer system only using measurements of coupling coefficients and simple equations of equivalent circuit model about loop antennas without complicated electromagnetic analysis. Using the proposed design method, a wireless power transfer system with a pair of loop antennas operating at the frequency of 13.56 MHz, which have a dimension of $50{\times}50\;cm^2$, is designed and implemented. The input return loss, coupling coefficient, efficiency, and input impedance variation with respect to a distance between loop antennas were measured. The proposed design method provides good agreements between measured and predicted results. Also, the wireless power transfer system with impedance matching circuits designed by the proposed design method shows two times higher efficiency characteristics than the case with the general $50\;{\Omega}$ impedance matching circuits. Therefore, we verified that our design method could be an effective tool to design a wireless power transfer system.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.926-937
• /
• 2016

In this paper, we study the feasibility of receiver diversity for application to downlink cellular networks, where low-energy devices are equipped with information decoding and energy harvesting receivers for simultaneous wireless information and power transfer. We compare several options that are based on selection combining and maximum ratio combining, which provide different implementation complexities. By capitalizing on the Frechet inequality, we shed light on the advantages and limitations of each scheme as a function of the transmission rate and harvested power that need to be fulfilled at the low-energy devices. Our analysis shows that no scheme outperforms the others for every system setup. It suggests, on the other hand, that the low-energy devices need to operate in an adaptive fashion, by choosing the receiver diversity scheme as a function of the imposed requirements. With the aid of stochastic geometry, we introduce mathematical frameworks for system-level analysis. We show that they constitute an important tool for system-level optimization and, in particular, for identifying the diversity scheme that optimizes wireless information and power transmission as a function of a sensible set of parameters. Monte Carlo simulations are used to validate our findings and to illustrate the trade-off that emerge in cellular networks with simultaneous wireless information and power transfer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.113-116
• /
• 2015

This paper presented about the system for controlling a wireless power transmission using bluetooth protocol. Bluetooth protocol has been applied in many fields that communicate with data and audio signal in short range. Recently, however, Bluetooth low energy(BLE) more simple than the existing protocol is standardized and is widely used in medical applications and consumer electronics that handle small amount of sensor data and transmit by the low power control signal. It has also been adopted as the standard for the control in the wireless power transfer system. In this paper, We analysed and described the bluetooth low energy protocol techniques for controlling the wireless power transfer system.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.193-201
• /
• 2018

In this paper, we extracted relevant patent data and conducted statistical analysis to understand the technical development trend related to Wireless Power Transfer (WPT) for Light Rail Transit (LRT). Recently, with the development of WPT technologies, the Light Rail Transit (LRT) industry is concentrating on applying WPT to the power supply system of trains because of their advantages compared wired counterpart, such as low maintenance cost and high stability. This technology is divided into three areas: wireless feeding and collecting technology, high-frequency power converter technology and orbital and infrastructure technology. From each specific area, key words in patent document were extracted by TF-IDF method and analyzed by social network. In the keyword network, core word of each specific technology were extracted according to their degree centrality. Then, the multi-word phrases were also built to represent the concept of core technologies. Finally, based on the analysis results, the development strategies for each specifics technical area of WPT in LRT filed will be provided.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.4
• /
• pp.303-309
• /
• 2019

A hybrid control of a rectifier/regulator of wireless power transfer systems for electric vehicles is studied. A combined rectifier/regulator is used for charging control. The hybrid control comprises integral cycle control and pulse width modulation control to cope with the variations in the induced voltage due to clearance and alignment. The hybrid control has good control capability and does not cause severe switching loss. A 22 kW prototype of the Wireless Power Transfer class 4 charging system defined by the Society of Automotive Engineers is constructed and tested to verify the proposal.