• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1236-1243
• /
• 2016

This paper presents the analysis and design of an active electromagnetic interference (EMI) filter (AEF) for the common-mode (CM) noise reduction of switching power converters. The features of the several types of AEFs are discussed and compared in terms of implementation. The feed-forward AEF with a voltage-sensing and voltage-cancellation (VSVC) structure is implemented for an LLC resonant converter to replace a multiple-stage passive EMI filter and thereby reduce CM noise. The characteristics and performance of the VSVC-type AEF are investigated through theoretical and experimental works.

• 전력전자학회논문지
• /
• 제25권5호
• /
• pp.404-411
• /
• 2020

Inductive power transfer (IPT) systems for electric vehicles generally require zero phase angle (ZPA) frequency tracking control to achieve high efficiency. Current sensors are used for ZPA frequency tracking control. However, the use of current sensors causes several problems, such as switching noise, degrading control performance, and control complexity. To solve these problems, this study proposes ZPA frequency tracking control without current sensors. Such control enables ZPA frequency tracking without real-time control and achieves stable zero voltage switching operation closed to ZPA frequency within all coupling coefficient and load ranges. The validity of the proposed control algorithm is verified on LCCL-S topology with a 3.3 kW rating IPT experimental test bed. Simulation verification is also performed.

• 한국통신학회논문지
• /
• 제40권1호
• /
• pp.16-22
• /
• 2015

본 논문에서는 원형 배열 안테나를 사용한 무선 메쉬 네트워크 LOS 환경에서 다중 노드 빔 형성을 위한 SIR 향상 빔 형성 전력 할당 기법을 제안한다. 제안된 방법은 다중 노드 접속을 위한 다중 노드 빔 형성 시 존재하는 전력 제한 조건을 만족시키며 송신 전력이 최대화되는 다중 빔 전력 할당 기법이다. 전산 모의 실험을 통하여 제안 한 빔 형성 전력 할당을 적용하였을 때 UCA 안테나에서 기존의 방법보다 다중 노드의 SIR이 향상됨을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.155-156
• /
• 2015

This paper proposes a high efficiency wireless power transfer system with an asymmetric 4-coil resonator. It presents a theoretical analysis, an optimal design method, and experimental results. In the proposed asymmetric 4-coil system, the primary side consists of a source coil and two transmitter coils which are called intermediate coils, and in the secondary side, a load coil serves as a receiver coil. In the primary side, two intermediate coils boost the apparent coupling coefficient at around the operating frequency. Because of this double boosting effect, the system with an asymmetric 4-coil resonator has a higher efficiency than the conventional symmetric 4-coil system. The prototype operates at 90 kHz ofswitching frequency and has 200 mm of the power transmission distance between the primary side and the secondary side. An AC-DC overall system efficiency of 96.56% has been achieved at 3.3 kW of output power.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.7-10
• /
• 2010

In this paper, we design a modem SoC (System on Chip) for low power consumption and high speed wireless communications. Among various schemes of high speed communications, an MB-OFDM (Multi Band-Orthogonal Frequency Division Multiplexing) UWB (Ultra-Wide-Band) chip is designed. The MB-OFDM uses wide-band frequency to provide high speed data rate. Additionally, the system imposes no interference to other services. The 90nm CMOS (Complementary Metal-Oxide Semiconductor) technology is used for the SoC design. Especially, power management mode is implemented to reduce the power consumption.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.631-634
• /
• 2009

최근 무선통신, MEMS 소자, 센서 및 베터리 분야의 발전은 저가, 저전력 다기능 소형 센서 노드를 가능하게 한다. 다수의 소형 센서 노드는 무선 통신을 통해 센서 네트워크를 형성한다. 센서 네트워크는 전통적인 센서를 통해 중요한 개선을 나타내며 지그비 무선 이미지 전송에 대한 연구는 산업과 과학 분야에서 주요 연구 테마가 되고 있다. 본 논문에서는 지그비 무선 이미지 센서 노드와 멀티미디어 모니터링 서버 시스템을 디자인하였다. 구현된 시스템은 임베디드 프로세서, CMOS 이미지 센서, 이미지 획득 및 처리부, 지그비 RF 모듈, 전력공급 및 원격 모니터링 서버 시스템으로 구성된다. 앞으로 지그비 무선 이미지 센서 노드 및 모니터링 서버 시스템의 성능을 개선하고 에너지 효율적인 지그비 무선 이미지 전송 프로토콜과 모바일 네트워크와의 연동에 대한 연구를 진행할 예정이다.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.305-313
• /
• 2017

A novel interference isolation method is proposed by using several designed coils in capacitive power transfer systems as isolation impedances. For each designed coil, its stray parameters such as the inter-turn capacitance, coil resistance and capacitance between the coil and the core, etc. are taken into account. An equivalent circuit model of the designed coil is established. According to this equivalent circuit, the impedance characteristic of the coil is calculated. In addition, the maximum impedance point and the corresponding excitation frequency of the coil are obtained. Based on this analysis, six designed coils are adopted to isolate the interference from power delivery. The proposed method is verified through experiments with a power carrier frequency of 1MHz and a data carrier frequency of 8.7MHz. The power and data are transferred parrallelly with a data carrier attenuation lower than -5dB and a power attenuation on the sensing resistor higher than -45dB.

• 대한임베디드공학회논문지
• /
• 제11권6호
• /
• pp.379-392
• /
• 2016

This paper presents the design and simulation of a laser power beaming (LPB) system for an electric vehicle that establishes an optimal power transmission path based on the received signal strength. The LPB system is possible to transfer power from multiple transmitters to a single receiver according to the characteristics of the laser and the solar panel. When the laser beams of multiple transmitters aim at a solar panel at the same time, the received power is the sum of all energy at a solar panel. Our proposed LPB system consists of multiple transmitters and multiple receivers. The transmitter sends its power characteristics as optically coded pulses with a class 1 laser beam and powers as a high-intensity laser beam. By using the attenuated power level, the receiver can estimate the maximum receivable powers from the transmitters and select optimal transmitters. Throughout the simulation, we verified the possibility that different LPB receivers were achieved their required power by the optimal allocation of the transmitter among the various transmitters.

• ETRI Journal
• /
• 제30권2호
• /
• pp.341-343
• /
• 2008

This letter presents an angular minimum spanning tree (AMST) algorithm for topology control in multi-hop wireless ad hoc networks. The AMST algorithm builds up an MST for every angular sector of a given degree around each node to determine optimal transmission power for connecting to its neighbors. We demonstrate that AMST preserves both local and network-wide connectivity. It also improves robustness to link failure and mitigates transmission power waste.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.271-274
• /
• 1999

This paper proposes a simple architecture of digital dividing block in dual-modulus prescaler phase-locked loop used in the wireless communication. Proposed architecture eliminates a swallow counter in the conventional one and demonstrates the advantages in reducing the power consumption and the gate-counts. Therefore, it is suitable for small die area and low power applications. The circuit is designed in a standard 0.35${\mu}{\textrm}{m}$ CMOS process.