• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.282-290
• /
• 2006

In this paper, we propose an enhanced Timing Estimator algorithm for 2.45GHz LR-WPAN receiver. Because an expensive and highly efficient oscillator can't be used for low-cost implementation, a Timing Estimator algorithm having stable operation in the channel environment with center frequency tolerance of 80 ppm is required. To enhance the robustness to frequency offset and the stability of receiver performance, multiple delay differential filter is adopted. By utilizing the characteristic that the correlation result between the output signal of Multiple delay differential filter and reference signal is restricted on the In-phase part of the correlator output, a coherent detection scheme instead of the typical noncoherent one is adopted for Timing Estimator. The application of the coherent detection scheme is suitable for LR-WPAN receiver aimed at low-cost, low-power, and low-complexity, since it can remove performance degradation due to squaring loss of I/Q squaring operation and decrease implementation complexity. Computer simulation results show that the proposed algorithm achieved performance improvement compared with the differential detection-based noncoherent scheme by 2dB in average.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.74-84
• /
• 2008

UWB radio systems have drawn attention during the last few years. These systems are the core technique for ubiquitous home and enable to co-exist with other narrow band systems over the same frequency without interfering them. But UWB signals have a very low power per pulse, so they are affected by strong narrow band interferences. Specially, IEEE 802.11a systems which operate around 5GHz overlap the band of UWB signals and they will interfere with UWB systems significantly. In this paper, we propose a novel narrow band interference suppression method based on singular value decomposition(SVD) algorithm for DS-UWB in IEEE 802.15.4a channel model. The proposed method is very effective and robust for both a single user DS-UWB system and a multiuser DS-UWB system to reduce the narrow band interference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1066-1074
• /
• 2008

In this paper, we proposed an efficient algorithm using pulse signal based on group-node-contention in LR-WPAN. The purpose of IEEE 802.15.4 is low speed, low cost and low power consumption. Recently, as applications of LR-WPAN have been extended, there is a strong probability of collision as well and almost collision occurs because of hidden node problem. Moreover, if the collision continuously occurs due to hidden node collision, network performance could be decreased. Nowadays, although several papers focus on the hidden node collision, algorithms waste the channel resource if continuous collisions frequently occur. In this paper, we assume that PAN has been already formed groups, and by using pulse signal, coordinator allocates channel and orders, and then, nodes in the allocated group can compete each other. Hence, contention nodes are reduced significantly, channel wastage caused by collision is decreased, and data transmission rate is improving. Finally, this algorithm can protect the network from disruption caused by frequent collisions. Simulation shows that this algorithm can improve the performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.256-268
• /
• 2008

This paper proposes an efficient scheme to track the time variant channel induced by multi-path Rayleigh fading in mobile wireless Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing (MIMO-OFDM) systems with null sub-carriers. In the proposed method, a blind channel response predictor is designed to cope with the time variant channel. The proposed channel tracking scheme consists of a frequency domain estimation approach that is coupled with a Minimum Mean Square Error (MMSE) time domain estimation method, and does not require any matrix inverse calculation during each OFDM symbol. The main attributes of the proposed scheme are its reduced computational complexity and good tracking performance of channel variations. The simulation results show that the proposed method exhibits superior performance than the conventional channel tracking method [4] in time varying channel environments. At a Doppler frequency of 100Hz and bit error rates (BER) of 10-4, signal-to-noise power ratio (Eb/N0) gains of about 2.5dB are achieved relative to the conventional channel tracking method [4]. At a Doppler frequency of 200Hz, the performance difference between the proposed method and conventional one becomes much larger.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.606-613
• /
• 2014

The Internet of Things (IoT), which has recently attracted attention as next-generation IT industry, is based on a wired and wireless network platform that can connect various Things. However, it is challenging to implement the IoT platform because of the heterogeneity of the network. Particularly, the ZigBee transmission may be significantly harmed due to Wi-Fi with the relatively much higher power, and this is one of the reason making the platform implementation difficult. In this paper, the ZigBee transmission is measured and analyzed by the BEB algorithm for finding the slot time when ZigBee can transmit, and an actual transmission happens stochastically depending on the network environment. The simulation results show that it guarantees high success rate of the ZigBee transmission by overcoming Wi-Fi interference in the 2.4 GHz frequency band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.851-860
• /
• 2013

To overcome a scarcity of radio resources to mobile broadband service, the usage of TV white space gains much attraction around the world. This paper carries out an interference analysis either by performing realistic experiments or by executing statistical Monte-Carlo simulation to exploit interference probability. The results obtained from experiments are compared to those from simulations in order to clarify the coexistence of utilization of TV band devices (TVBD) in indoor circumstances. Along the execution of our experiment in the presence of DTV receiver, we apply to a variety of transmission parameters proposed in FCC for TVBD. According to experimental and simulation works, the allowable transmission powers of TVBD systems are exploited for the plausible which are coexist on the first as well as the second adjacent frequency bands. Throughout results, it can conclude that TVBD systems can be coexisted via achieving proper transmission powers depending on the locations of themselves without showing harmful interference to DTV reception.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.345-353
• /
• 2011

An 1.485 Gbit/s video signal transmission system using the carrier frequency of H-band(220~325 GHz) was implemented and demonstrated for the first in domestic. The RF front-end was composed of Schottky barrier diode sub-harmonic mixers(SHM) and frequency triplers, and diagonal horn antennas for transmitter and receiver, respectively. The transmitted carrier frequency of 246 GHz was implemented in the H-band, and LO frequencies of H-band SHM is 120 GHz and 126 GHz for transmit and receive chains, respectively. The modulation scheme is ASK(Amplitude Shift Keying) where IF frequency is 5.94 GHz and the envelop detection was used in heterodyne receiver architecture, and direct detection receiver using ZBD(Zero Bias Detector) was implemented as well. The 1.485 Gbit/s video signal with HD-SDI format was successfully transmitted over wireless link distance of 5 m and displayed on HDTV at the transmitted average output power of 20 ${\mu}W$.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.255-260
• /
• 2000

This paper presents a radio-telemetry patient monitor. which is used for intensive cal?e units. emergency and surgical operation rooms to monitor continuously patients' vital signs. The radio-telemetry patient monitor consists of a vital sign acquisition unit. wireless data transmission units and a vital sign-monitoring unit. The vital sign acquisition unit amplifies biological signals, performs analog signal to serial digital data conversion using the one chip micro-controller. The converted digital data is modulated FSK in UHF band using low output power and transmitted to a remote site in door. In comparison with analog modulation. FSK has major advantages to improve performance with respect to noise resistance with fower error and the potential ability to process and Improve quality of the received data. The vital sign-monitoring unit consists of the receiver to demodulate the modulated digital data, the LCD monitor to display vital signs continuously and the thermal head printer to record a signal.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.501-512
• /
• 2018

Radio frequency identification (RFID) sensor tag provides several advantages including battery-less operation and low cost, which are suitable for long-term monitoring. This paper presents a self-powered RFID temperature sensor tag for online temperature monitoring in substation. The proposed sensor tag is used to measure and process the temperature of high voltage equipments in substation, and then wireless deliver the data. The proposed temperature sensor employs a novel phased-locked loop (PLL)-based architecture and can convert the temperature sensor in frequency domain without a reference clock, which can significantly improve the temperature accuracy. A two-stage rectifier adopts a series of auxiliary floating rectifier to boost its gate voltage for higher power conversion efficiency. The sensor tag chip was fabricated in TSMC $0.18{\mu}m$ 1P6M CMOS process. The measurement results show that the proposed temperature sensor tag achieve a resolution of $0.15^{\circ}C$/LSB and a temperature error of $-0.6/0.7^{\circ}C$ within the range from $-30^{\circ}C$ to $70^{\circ}C$. The proposed sensor tag achieves maximum communication distance of 11.8 m.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1037-1040
• /
• 2005

In this paper, we analyze the performance of high data rate wireless personal area network (HDR-WPAN) system using multiple antenna scheme, space-time block code in fading channel. Multiple antenna technique is used to improve the error performance by combining the receive signal through multiple receive antenna. Space-time block code is a space-time diversity scheme which can obtain the maximum space diversity gain and easily implements a ML receiver via a simple process. HDR-WPAN system using space-time block code obtain about 14dB diversity gaint at BER 10$^{-5}$ in multipath fading channel. From the simulation result, We confirm that HDR-WPAN system adopting space-time block code has reliable communication even low power.