• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1558-1562
• /
• 2005

This paper describes the design and implementation of a wireless home network system using Home Network Control Protocol (HNCP) called the wireless HNCP home network system. For wireless interfaces of HNCP, IEEE 802.11b and IEEE 802.15.4 standard protocols are considered. With the implementation of the wireless HNCP home network system, a simple analysis about coexistence between IEEE 802.11b and IEEE 802.15.4 is achieved. Through the implemented wireless HNCP home network system and the analytical results about the coexistence between both two different wireless protocols, the feasibility of the wireless HNCP home network system is shown.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.177-178
• /
• 2005

Wireless 1394 over IEEE802.15.3 must allow a data reserved for delivery over a wired 1394 network to be delivered over an IEEE802.15.3 wireless network through bridging IEEE 1394 to IEEE802.15.3. Isochronous transfers on the 1394 bus guarantee timely delivery of data. Specifically, isochronous transfers are scheduled by the bus so that they occur once every $125\;{\mu}s$ and require clock time synchronization to complete the real-time data transfer. IEEE1394.1 and Protocol Adaptation Layer for IEEE1394 over IEEE802.15.3 specify clock time synchronization for a wired 1394 bus network to a wired 1394 bus network and wireless 1394 nodes, which are IEEE802.15.3 nodes handling 1394 applications, over IEEE802.15.3. Thus, the clock time synchronizations are just defined within a homogeneous network environment like IEEE1394 or IEEE802.15.3 until now. This paper proposes new clock time synchronization method for wireless 1394 heterogeneous networks between 1394 and 802.15.3. If new method is adopted for various wireless 1394 products, consumer electronics devices such as DTV and Set-top Box or PC devices on a 1394 bus network can transmit real time data to the AV devices on the other 1394 bus in a different place via IEEE 802.15.3.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.227-234
• /
• 2007

In this paper, to support a QoS level appropriate to the user in Wireless Home Network based Wireless LAN, we propose a QoS support architecture which includes Wired Network and Wireless Network. Actually, an important problem to support QoS in Wireless Home Network is approached not only on a MAC level in Wireless LAN but also on a integrated method to combine Network layer with Datalink layer. By applying the integrated QoS support method, it is possible to provide QoS support architecture using a Wireless LAN terminal with a minimum changing, and the proposed scheme has advantage of QoS support method, which is more superior than a existing scheme to support QoS in MAC level of Wireless LAN. Simulations results show that overall performance of the proposed scheme can be improved.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1337-1342
• /
• 2012

In recent years, many researches in Home Networking are being progressed actively. Most of techniques for Home Networking are based on wired but the technique for wireless connection is also needed. This paper focuses on wireless connection in Home Networking. Of many of wireless technologies, such as Wireless LAN, Bluetooth, or HomeRF, we especially propose to apply the new technique called Wireless Sensor Network. We present hardware and protocol stack design consideration for wireless sensor node and wireless sensor network, and then we present how to apply wireless sensor network to Home Networking and how to constitute Wireless Home-Networking with a variety of sensor nodes. Finally, we introduce the wireless sensor node system designed by us and conclude this paper.

• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.23-27
• /
• 2007

Fruition for a diverse uIT(Ubiquitous Information Technology) service is currently required through the convergence of what is known as ubiquitous computing technology. In recent years, with the rapid growth of the need for information services, heavier demands have been made upon the supply of high-quality multimedia services that require a high bandwidth. Today, various home network solutions have been proposed to manage these service smoothly and a system able to deal with various types of network traffic without delays. In addition, in established home network environments that mix wired and wireless networks, along with the steady evolution of wireless network technology and the earnest development of ubiquitous computing technology, sensor-based wireless networks have emerged as a core solution for home networks. In this paper, a sensor network-based home control system supporting the next generation home gateway system for ubiquitous home environments is designed and implemented.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.142-149
• /
• 2007

Wireless sensor network technology is an emerging technology consisting of small, low power, and low cost devices that integrate limited computation, sensing, and radio communication capabilities. An ad-hoc home network system based embedded system for home environment monitoring was fabricated and tested. The wireless sensor node consists of a MCU, RF transceiver and sensors (temperature, humidity and light). Wireless sensor nodes run application software for data sampling and wireless communication, that was developed using 'nesC language' which runs on TinyOS. In our tests, acquired sensors data were monitored on 6.4" TFT-LCD of base-station through IEEE802.15.4 standard wireless communication. Also, the sensor data can be monitored by client user at the terminal PC to monitor environmental status of home in real time.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.479-480
• /
• 2007

It is study about implementation of the home network system that used an ubiquitous sensor network and an embedded system in this paper. PXA270 and CC2420 were used, and the home server of a wireless sensor home network system composed it. A wireless control system is composed of a gas valve, a DC motor, a lamp and a door rock. A wireless detection system is composed of a gas detection sensor, a movement detection sensor, an extension detection sensor The wireless detection system that was an environment sensing system was composed of temperature, humidity, mic, illuminance, a speed-up, infrared rays temperature sensing module, and modular, other RFID established an USB camera, and an ubiquitous home network was composed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.375-380
• /
• 2005

In this paper, We studied an antenna for the wireless home network service. From the structural modification of patch and ground plane, we made a reverse heart shape radiated pattern of antenna which is suited to wireless home network service. As a result, bandwidth between maximum gains is 110 degree, and the difference of downward direction gain from maximum gain have become -3.6dB. Installing the antenna on the ceiling, horizontal plane of the inner home will be formed the uniform electromagnetic environment. Accordingly, stable reception level acquisition and outdoor radiated suppression could be possible.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.183-186
• /
• 2005

WUSB is a new technology which combines the speed and the security of wired USB with the easy use of wireless technology. In this paper, GUI for WUSB is designed and implemented to show the connectivity and contents of the WUSB devices. Also, the proposed GUI shows the log window while content transfers occur between the host and device. The proposed GUI can be used for various wireless technologies which provide wireless function with existing USB hosts and devices.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1295-1309
• /
• 2007

A wireless access point is used for all communications in the infrastructure mode wireless home networking, including communication between mobile nodes in the same service area. When a mobile station in the infrastructure mode wireless home networking moves into a dead zone, the communication between the mobile station and the access point is disconnected. To solve this problem, the existing wireless home network platforms focus on the ad hoc mode wireless home networking. However, the performance of an ad hoc network is poorly decreased when the number of mobile participating in the ad hoc network increases. In addition, although the ad hoc routing technique is necessary to support seamless communication of mobile nodes, the existing routing protocols, such as AODV and DSR, do not consider that a wireless channel state could affect performance significantly. Therefore, we propose a wireless home networking platform based on the ESCOD (End-to-end Seamless multi-hop COnnection based on Dual network mode) technique incorporating the VLR (Virtual Link Routing) scheme that supports end-to-end seamless connections. Extensive experiments show that the proposed wireless home networking platform incorporating the VLR scheme outperforms wireless home networking platforms based on the AODV and the DSR routing protocols respectively in terms of low packet transmission failure rate, fast packet transmission time, high TCP performance, and a wider coverage area of wireless home networks.