• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.82-86
• /
• 2001

This papers deals with feasibility study of wireless motion control. Wireless telecommunication advances with development of IT technology and extends more and more areas. So we selected Bluetooth out of the technologies(Bluetooth, SWAP(SharedWireless Access Protocol), IrDA(Infra Red Data Association), WLAN(Wireless Local Area Network)) which was developed for local data communication and set up simple experimental system for wireless data transfer and server and client program for wireless data transfer was wrote. We successfully transferred some data wirelessly with this program.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.98-106
• /
• 2009

This paper proposes an optical wireless transfer agent method which realizes the continuous and swift data transfer of optical wireless terminals in optical wireless networks. The unguided wireless channel generally shows frequent link disconnections and propagation delays due to weak wireless links. Specially speaking, optical wireless channels have more vulnerable links and roaming propagation delays relative to the weakness of the previous RF channels due to their low signal connectivity and small geographic coverage. Conventional optical wireless network protocols did not consider any fault models about physical link faults. Consequently, they have shown data transfer inefficiency for both data link control and physical wireless link control. To overcome these optical wireless environmental problems, this paper suggests a new wireless access point (or base station) agent system, which provides wireless or mobile clients with previous link layer protocols compensated.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.121-128
• /
• 2023

To increase the lifetime of the network in wireless sensor networks, energy harvesting from the surrounding environment or wireless power transfer is being used. In addition, to reduce the energy imbalance and increase the amount of data gathered, a method using mobile sink nodes that visit sensor nodes to gather data has been used. In this paper, we propose a technique to reduce the load on the relay node and collect a lot of data evenly in this environment. In the proposed scheme, sensor nodes construct Minimum Depth Trees (MDTs) considering the network environment and energy, and allocate the data collection amount. Simulation results show that the proposed technique effectively suppresses energy depletion and collects more data compared to existing techniques.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.553-563
• /
• 2012

Serial peripheral interface (SPI) has been identified as a bottleneck in many wireless sensing systems today. SPI is used almost universally as the physical connection between the microcontroller unit (MCU) and radios, storage devices, and many types of sensors. Virtually all wireless sensor nodes today perform up to twice as many bus transactions as necessary to transfer a given piece of data, as an MCU must serve as the bus master in all transactions. To eliminate this bottleneck, we propose the master-handoff protocol. After the MCU initiates reading from the source slave device and writing to the sink slave device, the MCU as a master becomes a slave, and either the source or the sink slave becomes the temporary master. Experiment results show that this master-handoff technique not only cuts the data transfer time in half, but, more importantly, also enables a superlinear energy reduction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.3
• /
• pp.230-234
• /
• 2007

Generally, huge amounts of data traffic are generated by using broadcasting method to deliver sensing data to a sink node reliably so that it makes a severe network saturation problem resulting in unreliable data transfer. In order to handle this problem, a new congestion control protocol is required for supporting reliable data transfer, minimal use of energy and network resources at the same time in wireless sensor networks. In this paper, it proposes a Protocol to guarantee both a reliable transfer in data accuracy and minimum consumption of energy waste by using Hop-by-Hop sequence number and DSbACK(Delayed and Selective ACK Buffer Condition) scheme. In addition, it proves that reliability and energy efficiency are enhanced by the proposed method with the simulation results performed on TinyOS platform which is a component based built-in OS announced by UC Berkely with the performance comparison of other existing methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.435-438
• /
• 2003

The MS card data transfer system using blue-tooth protocol ran communicate the MS card data wirelessly and does not take an extra communication expense which is a weakness point of existing wireless communication system. This Blue-tooth system, which has excellent security and no extra communication expense, can efficiently communicate data of the place ,where can be solved with small scale wireless network, such as the theme-park or gasoline-station. Existing wireless communication system compose network using wireless-LAN protocol which has extra communication expense, or with RF protocol which has poor security. But this system suitable for LAN because it has not extra communication expense and it has excellent security cause frequency-hopping of Blue-tooth protocol. The MS card data transfer system using blue-tooth protocol has low power, high performance RISC processor and large scale 16-gray graphic LCD which is suitable for portable unit. The MS card data transfer system can efficiently control depot for a long time because it has low power, excellent security and no extra communication expense.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.105-111
• /
• 2020

In this paper, we propose a scheme that minimizes the energy imbalance problem of solar-powered wireless sensor network (SP-WSN) using both a mobile sink capable of wireless power transfer and an efficient clustering scheme (including cluster head election). The proposed scheme charges the cluster head using wireless power transfer from a mobile sink and mitigates the energy hotspot of the nodes nearby the head. SP-WSNs can continuously harvest energy, alleviating the energy constraints of battery-based WSN. However, if a fixed sink is used, the energy imbalance problem, which is energy consumption rate of nodes located near the sink is relatively increased, cannot be solved. Thus, recent research approaches the energy imbalance problem by using a mobile sink in SP-WSN. Meanwhile, with the development of wireless power transmission technology, a mobile sink may play a role of energy charging through wireless power transmission as well as data gathering in a WSN. Simulation results demonstrate that increase the amount of collected data by the sink using the proposed scheme.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.805-814
• /
• 2016

Electric-field coupled power transfer (ECPT) systems have been proposed as an alternative wireless power transfer (WPT) technology in recent years. With the use of capacitive plates as a coupling structure, ECPT systems have many advantages such as design flexibility, reduced volume of the coupling structure and metal penetration ability. In addition, wireless communications are effective solutions to improve the safety and controllability of ECPT systems. This paper proposes a power and signal shared channel for electric-field coupled power transfer systems. The shared channel includes two similar electrical circuits with a band pass filter and a signal detection resistor in each. This is designed based on the traditional current-fed push-pull topology. An analysis of the mutual interference between the power and signal transmission, the channel power and signal attenuations, and the dynamic characteristic of the signal channel are conducted to determine the values for the electrical components of the proposed shared channel. Experimental results show that the designed channel can transfer over 100W of output power and data with a data rate from 300bps to 120 kbps.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1459-1461
• /
• 2004

EMU, Electrical Multiple Unit, stores various information in the computer system installed on the vehicle when train is running. The stored information has to be moved into a computer installed on the ground. The information is used to all kinds of planning concerned EMU, and taken advantage of maintenance with information importantly. IC memory card is used to move the information from vehicle to the ground at present. But this method has many weaknesses from hours and manpower aspect because it spends much time shifting data. So this paper proposes a method to move data as quickly and correctly as possible. We propose the method to collect the information using wireless LAN automatically in this paper. And we carried out data-transfer-test on the real field using wireless LAN to confirm possibility of this method. This paper shows the result of the data-transfer-test.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.16-19
• /
• 2012

A modified 4-coil magnetic resonance wireless power transfer (MRWPT) system is proposed. Four coils based on 2-coil system with additional two matching coils were used in this topology. When Tx-Rx distance is changed, the input impedance is changed. However, it can be adjusted by coil parameters of matching coils to maintain impedance matching for maximum efficiency. The equivalent circuit of MRWPT system was analyzed for both transmission function and optimum coupling coefficient of the matching coils. By using four spiral resonant coils, these design considerations was experimentally verified. The measured data agreed well with the calculated data and the transmission function of the proposed system was more efficient than that of conventional 2-coil system.