• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.2
• /
• pp.67-76
• /
• 2020

This study aims to optimize the cochlea-inspired artificial filter bank (CAFB) using El-Centro seismic waveforms and test its performance through a shaking table test on a two-span bridge model. In the process of optimizing the CAFB, El-Centro seismic waveforms were used for the purpose of evaluating how they would affect the optimizing process. Next, the optimized CAFB was embedded in the developed wireless-based intelligent data acquisition (IDAQ) system to enable response measurement in real-time. For its performance evaluation to obtain a seismic response in real-time using the optimized CAFB, a two-span bridge (model structures) was installed in a large shaking table, and a seismic response experiment was carried out on it with El-Centro seismic waveforms. The CAFB optimized in this experiment was able to obtain the seismic response in real-time by compressing it using the embedded wireless-based IDAQ system while the obtained compressed signals were compared with the original signal (un-compressed signal). The results of the experiment showed that the compressed signals were superior to the raw signal in response performance, as well as in data compression effect. They also proved that the CAFB was able to compress response signals effectively in real-time even under seismic conditions. Therefore, this paper established that the CAFB optimized by being embedded in the wireless-based IDAQ system was an economical and efficient data compression sensing technology for measuring and monitoring the seismic response in real-time from structures based on the wireless sensor networks (WSNs).

• Journal of information and communication convergence engineering
• /
• v.11 no.4
• /
• pp.253-257
• /
• 2013

Mobile computers can process large amounts of data at high speeds, and it is feasible and easy to implement a remote monitoring system utilizing mobile computers. Because of their portability and convenience, these computers have been employed in various research areas to develop such monitoring systems. Existing monitoring system is a bit difficult to real time monitoring the scattered offshore facilities. So this paper compensate the existing system by using mobile computers such as a tablet PC-based monitoring system. Also, the scattered offshore facilities can be monitored in real-time through the tablet PC. The developed monitoring system is a fully Internet-based monitoring platform that enables one to monitor and control remote oceanic applications at any time and any place where it is possible to access the Internet. It can be applied to many oceanic applications as well as the unmanned systems and remote monitoring systems on land.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.317-320
• /
• 2006

Ships and their cargos have been managed safely by positioning report system. However, little attention has been paid to safety of crew's works with danger. The attempt that used PHS inboard was before by the present authors. However, the functions were just voice call and mail exchange. The data acquisition from the terminal by proper control was not possible. Thus the position of the terminal was not available. As for the cell phone of next generation, GPS receiver and wireless LAN are installed by manufacturers. Therefore, we propose a system which uses a cell-phone with GPS receiver on a ship in order to promote the safety of ship's crew. We checked the availability of cell-phone GPS receiver at thirty different points inboard. The positioning was not possible in the areas further than 4m from the window. Then, we proposed the system which follows the positions of the crews and confirms their safety inboard by using the VoIP (Voice over Internet Protocol) function by wireless LAN.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.259-261
• /
• 2003

This paper suggests wireless diagnosis and monitoring system using SMS mode of mobile communication network for distribution transformer which could prevent electrical accident in the near future. Data are acquired by measuring the temperature of insulator oil in the distribution transformer and load current. Data acquisition of sensor using mobile communication network carried out filtering of sensor's output to optimize the size of send data Merit of this inspection method is that management, control and monitoring some transformers can be carried out using only one server. This inspection method will be the way of inspection to be worth spotlight in the near future because it is able to solve easily with the minimum facility inspection about state of transformer which is operating, to wide coverage about machine's wrong operation in other field.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.329-331
• /
• 2014

A simple realization of an alignment-free wireless power transmission (WPT) system is presented in this letter. The WPT system consists of a transmitter with three reconfigurable modes corresponding to various controllable magnetic field directions in the azimuthal plane and an algorithm for the optimum mode selection carried by sensing the reflected voltage of the system. Twelve light emitting diodes (LEDs) are used to confirm the on- and off-state of LEDs powered wirelessly by the transmitter at every $15^{\circ}$ of the azimuthal plane. A criterion voltage from the reflected power of the system is found by using the correlation between the reflected voltage and the on- and off-state of the LEDs. Simply by continuous; monitoring of the voltage from the system, the system maintains power to the LEDs. The system is realized by MATLAB/Simulink and a National Instrument data acquisition device (DAQ) board. Measurements using the system show on-state LEDs in the azimuthal plane except at the angles of $60^{\circ}$, $75^{\circ}$, $180^{\circ}$, and $300^{\circ}$.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.176-179
• /
• 2001

A portable bio-signal measurement system for 24-hours continuous health monitoring of the elderly and the disabled is presented. The measurement system has the functions of acquisition of various bio-signals such as ECG, EMG and EEG, wireless data transmission/receive and adjustment of parameters such as gain and cut-off frequency. The data is sent to a host computer or other device via a Bluetooth. The design targets of the developing system for volume and power consumption are $20{\times}30{\times}5(mm^3)$ and 8mW.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.918-931
• /
• 2013

The conventional object tracking techniques using PTZ camera detects object movements by analyzing acquired image. However, this technique requires expensive hardware devices to perform a complex image processing. And it is occasionally hard to detect object movements, if an acquired image is low quality or image acquisition is impossible. In this paper, we proposes a smart security CCTV system applying to wireless sensor network technique based on IEEE 802.15.4 standard to overcome the problems of conventional object tracking technique, which enables to track suspicious objects by detecting object movements and GPS data in sensor node. This system enables an efficient control of PTZ camera to observe a wide area, decreasing image processing complexity. Also, wireless sensor network is implemented using mesh networks to increase the efficiency of installing sensor node.

• Wind and Structures
• /
• v.21 no.6
• /
• pp.677-691
• /
• 2015

In this study, the geometrical setup of a turbine blade is tracked. A research-scale rotating turbine blade system is setup with a single 3-axes accelerometer mounted on one of the blades. The turbine system is rotated by a controlled motor. The tilt and rolling angles of the rotating blade under operating conditions are determined from the response measurement of the single accelerometer. Data acquisition is achieved using a prototype wireless sensing system. First, the Rodrigues' rotation formula and an optimization algorithm are used to track the blade rolling angle and pitching angles of the turbine blade system. In addition, the blade flapwise natural frequency is identified by removing the rotation-related response induced by gravity and centrifuge force. To verify the result of calculations, a covariance-driven stochastic subspace identification method (SSI-COV) is applied to the vibration measurements of the blades to determine the system natural frequencies. It is thus proven that by using a single sensor and through a series of coordinate transformations and the Rodrigues' rotation formula, the geometrical setup of the blade can be tracked and the blade flapwise vibration frequency can be determined successfully.

• Journal of Ship and Ocean Technology
• /
• v.9 no.2
• /
• pp.1-10
• /
• 2005

A light-weight cantilever type towing carriage was devised and installed in the towing tank at Seoul National University. Wireless measurement devices were also provided for appropriate data acquisition during high-speed towing tests. With the new carriage system, a series of model tests were performed to investigate the hydrodynamic characteristics of the racing boat in the towing tank and the resistance test results had sufficient accuracy so that they could be used in the development of a high speed planning hull.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1333-1340
• /
• 2000

This paper shows that the Kronecker sequence, the rapid acquisition spreading code, can be used in packet wireless data communication systems. The general properties of the Kronecker sequence such as construction and correlation characteristics are described, and it is shown that the Kronecker sequence can use a partial-period correlation for a faster acquisition. Based on above Properties, it can be expected that the Kronecker sequence can be used in packet communication systems because the probability of false alarm for the Kronecker sequence is lower and flatter(that is, less sensitive to Ec/No variations) than that for the PN sequence under the assumption that both sequences have the same acquisition time.