• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5189-5208
• /
• 2015

To address the contradiction between data aggregation and data security in wireless sensor networks, a Recoverable Privacy-preserving Integrity-assured Data Aggregation (RPIDA) scheme is proposed based on privacy homomorphism and aggregate message authentication code. The proposed scheme provides both end-to-end privacy and data integrity for data aggregation in WSNs. In our scheme, the base station can recover each sensing data collected by all sensors even if these data have been aggregated by aggregators, thus can verify the integrity of all sensing data. Besides, with these individual sensing data, base station is able to perform any further operations on them, which means RPIDA is not limited in types of aggregation functions. The security analysis indicates that our proposal is resilient against typical security attacks; besides, it can detect and locate the malicious nodes in a certain range. The performance analysis shows that the proposed scheme has remarkable advantage over other asymmetric schemes in terms of computation and communication overhead. In order to evaluate the performance and the feasibility of our proposal, the prototype implementation is presented based on the TinyOS platform. The experiment results demonstrate that RPIDA is feasible and efficient for resource-constrained sensor nodes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4223-4249
• /
• 2015

A novel jamming detection technique to detect the presence of jamming in the downstream direction for cluster based wireless sensor networks is proposed in this paper. The proposed technique is deployed in base station and in cluster heads. The proposed technique is novel in two aspects: Firstly, whenever a cluster head receives a packet it verifies whether the source node is legitimate node or new node. Secondly if a source node is declared as new node in the first step, then this technique observes the behavior of the new node to find whether the new node is legitimate node or jammed node. In order to monitor the behavior of the existing node and new node, the second step uses two metrics namely packet delivery ratio (PDR) and received signal strength indicator (RSSI). The rationality of using PDR and RSSI is presented by performing statistical test. PDR and RSSI of every member in the cluster is measured and assessed by the cluster head. And finally the cluster head determines whether the members of the cluster are jammed or not. The CH can detect the presence of jamming in the cluster at member level. The base station can detect the presence of jamming in the wireless sensor network at CH level. The simulation result shows that the proposed technique performs extremely well and achieves jamming detection rate as high as 99.85%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.49-54
• /
• 2010

3GPP(Third Generation Partnership Project) LTE system that is the next step forward in cellular 3G services address the issues related to power saving at LTE base station. This is because that most of the energy in a typical telecommunication network is consumed by the wireless network's base station site. Power saving at LTE base station fall in with low-carbon green technology. This thesis proposes a power saving MAC protocol for LTE base station which utilizes different graded DRX/DTX(Discontinuous. Reception/Transmission). Considering traffic type in UE, proposed MAC protocol controls adaptive DRX/DTX cycle. The proposed method is more improve power saving performance than another method which is unchanged DRX/DTX by conditions. In this thesis, I propose an power saving MAC protocol in an environment where LTE base station are communicated with UE and prove improvement in performance through simulations.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.571-574
• /
• 2002

In a recent wireless network environments, dynamic host configuration protocol (BHCP) service is used to assign IP addresses to mobile terminals. In IPv6 networks, it is necessary to introduce the concept of handoff to support a seamless service to mobile terminals. In a general soft handoff technique used by code-division multiple acces (CDMA) communication systems, the powers received to base station are simply compared to determine which base station will handle the signal to and from each mobile termins. However, in IPv6 network, to transmit data-oriented services, it is necessary to support an enhanced soft handoff technique with more security and quality of service. In this paper, we propose a scheme to reduce a signaling process of handoff in IPv6 network. Also, we propose a technique to reduce wasted reservation resources and to guarantee quality of service (QoS) using DHCP.

• The KIPS Transactions:PartC
• /
• v.8C no.2
• /
• pp.182-188
• /
• 2001

이동 호스트에서 기지국으로의 데이터 전송 시 예상치 못한 기지국 전체 고장은 필연적으로 버퍼에 있는 데이터의 손실을 초래하고 적절한 손실 보상이 필요하다. 기지국의 고장시의 회복을 위한 기존의 기법들은 오버헤드가 많고 단순히 무선 링크 장애만을 고려하므로 기지 국 전체 고장에는 적합하지 않다. 유무선망 전체의 신뢰성 있는 전송을 위한 End to End 전송 방식도 비효율적으로 이동 호스트가 보상할 데이터 량을 알기 위해 필요한 기지국 버 퍼의 정확한 손실 정도를 알기 어렵다. 본 논문에서는 기존에 제안된 기법들의 문제점을 분 석하고 무선 ATM망에서 기지국 고장 시에 효율적으로 손실 보상을 하도록 하는 기법으로 CPS(Checkpoint Scheme)을 제안한다. CPS는 기지국이 버퍼의 출력 정보를 통보하여 고장 시에 이동 호스트가 seamless한 전송을 할 수 있도록 한다. 기존의 기법들과 시뮬레이션 및 비교 분석을 통하여 CPS의 효율을 증명한다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1189-1190
• /
• 2008

Wireless sensor networks (WSN) have attracted much attention in recent years due to their potential use in many applications such as border protection and combat field surveillance. Given the criticality of such applications, maintaining a dependable operation of the network is a fundamental objective. However, the resource constrained nature of sensor nodes and the ad-hoc formation of the network, often coupled with an unattended deployment, pose non-conventional challenges and motivate the need for special techniques for dependable design and management of WSN. In this article, we highlight the potential of careful positioning of the base station (BS), which acts as a sink resources.

• Electronics and Telecommunications Trends
• /
• v.34 no.3
• /
• pp.86-92
• /
• 2019

New products and services, such as 5G and wireless power transmission equipment, have recently brought about changes in the field of electromagnetic technology. There is a need for the evaluation and measurement of the health effects of such technology. To address this need, the development of international standards related to human exposure to electromagnetic waves of these new technologies are currently being discussed. This article briefly introduces the International Standard Organization standards for human exposure to electromagnetic waves, and focuses on the major standard trends for SAR measurement techniques that employ vector probes, wireless power transfer, and 5G base station measurement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.459-461
• /
• 2019

The location estimation algorithm in the existing wireless network uses a base station to estimate the absolute location of three or more in the state where the terminal is fixed. However, this paper suggests a location recognition algorithm that uses a mobile terminal to estimate the location of a mobile base station using a traverse technique using a three-way estimation.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.149-149
• /
• 2020

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.65-73
• /
• 2004

By the progress of communication and hardware technology, It is possible to organize wireless sensor nodes using the tiny sensor in recently. It is a critical aspect to minimize energy consumption for long-term lively sensor because wireless sensor nodes are associated with the available resources. The wireless sensor network is restricted in communication, exhaustion of power, and computation but it is very similar an Ad-Hoc network. Each sensor node products a few data and application layer of each sensor has slow transmitting feature. Unlike Ad-hoc, which is usually source or sink, base station of the each senor nodes works as sink and the other nodes except sink node works as source. Generally, wireless sensor network keep staying fixed state and observing circumstances continuously after setting up. It doesnt fit for the wireless sensor networks under functioning of existing ad-hoc networks because original Ad-Hoc network routing protocol couldnt operate for wireless sensor network features. This thesis propose the effective routing protocol way in the filed of the expanded routing protocol based on tree with considering on the characteristic of wireless sensor networks pattern.