• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.1
• /
• pp.10-18
• /
• 2007

In this paper, we address the node positioning method for minimizing the overlap sensing areas in wireless sensor networks with adjustable sensing ranges. To find a optimal node position, we derive a optimal equations by using the overlapped areas, each node's radiuses and expended angles of opposite neighboring nodes. Based on it, we devise a new node positioning method, called as ASRC(Adjustable Sensing Ranges Control). Unlike existing condition based model, our proposed method is derived from mathematical formula, and we confirm its validity through various simulations.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.79-86
• /
• 2016

In wireless sensor networks, increasing the sensing rate of each node to improve the data accuracy usually incurs a decrease of network lifetime. In this study, an energy-adaptive data compression scheme is proposed to efficiently control the sensing rate in an energy-harvesting wireless sensor network (WSN). In the proposed scheme, by utilizing the surplus energy effectively for the data compression, each node can increase the sensing rate without any rise of blackout time. Simulation result verifies that the proposed scheme gathers more amount of sensory data per unit time with lower number of blackout nodes than the other compression schemes for WSN.

• Journal of Sensor Science and Technology
• /
• v.22 no.4
• /
• pp.268-275
• /
• 2013

Efficient energy management becomes a critical design issue for complex WSN (Wireless Sensor Network). Most of complex WSN employ the sleep mode to reduce the energy dissipation. However, it should cause the reduction of sensing coverage. This paper presents new wake-up algorithm for reducing energy consumption in complex WSN. The proposed wake-up algorithm is devised using geometric probability. It determined which node will be waked-up among the nodes having overlapped sensing coverage. The only one sensor node will be waked-up and it is ready to sense the event occurred uniformly. The simulation results show that the lifetime is increased by 15% and the sensing coverage is increased by 20% compared to the other scheduling methods. Consequently, the proposed wake-up algorithm can eliminate the power dissipation in the overlapped sensing coverage. Thus, it can be applicable for the various WSN suffering from the limited power supply.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.1
• /
• pp.73-78
• /
• 2016

In wireless sensor networks, sensors have capabilities of sensing and wireless communication, computing power and collect data such as sound, movement, vibration. Sensors need to communicate wirelessly to send their sensing data to other sensors or the base station and so they are vulnerable to many attacks like garbage packet injection that cannot be prevented by using traditional cryptographic mechanisms. To defend against such attacks, a behavior-based attack detection is used in which some specialized monitoring nodes overhear the communications of their neighbors(normal nodes) to detect illegitimate behaviors. It is desirable that the total sensing area of normal nodes covered by monitoring nodes is as large as possible. The previous researches have focused on selecting the monitoring nodes so as to maximize the number of normal nodes(node coverage), which does not guarantee that the area sensed by the selected normal nodes is maximized. In this study, we have developed an algorithm for selecting the monitoring nodes needed to cover the maximum sensing area. We also have compared experimentally the covered sensing areas computed by our algorithm and the node coverage algorithm.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.75-81
• /
• 2009

In this paper, USN of wireless communication with easy to install and effectiveness with variety information gathering has been proposed as a alternative of wired-based line for transmission of fire sensing data. But, The sensor node using USN should be considered for wireless transmission range and reliability of information. In this study, the zigbee protocol sensor node was implemented and then tested transmission range of sensor node as 10m interval using voltage information of DC 3V & 5V. Here, maximum transmission distance was confirmed 90m inside-outside. When used mesh routing relay node, distance was not limited. In USN network building, when fire sensing data transmitted, the sensing data same between direct sensing data from sensor and collecting data at USN. Therefore, was confirmed reliability for transmission range and information of proposed zigbee sensor node.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2099-2106
• /
• 2006

In this paper, we addressed the node positioning method for minimizing the sensing energy consumption in wireless sensor networks with adjustable sensing ranges. It is necessary for minimizing the sensing energy consumption to minimize the overlapped sensing area by neighboring nodes. To find a optimal node position, we derived a optimal equations by using the overlapped areas, each node's radiuses and expended angles of opposite neighboring nodes. Based on it, we devised a new node positioning method, called as ASRC(Adjustable Sensing Ranges Control). Unlike existing condition based model, our proposed method was derived from mathematical formula, and we confirmed its validity of sensing energy consumption through simulations.

• Journal of KIISE:Information Networking
• /
• v.31 no.3
• /
• pp.327-334
• /
• 2004

In this paper, we make MAC protocol improvements for performance enhancement of multi-hop ad-hoc wireless networks. A node in ad-hoc wireless networks can transmit a packet only when the medium is available, and while a packet is being transmitted, no other nodes are allowed to transmit a packet if they are in carrier sensing range. Carrier sensing range can be divided into two disjoint areas of transmission range and carrier sensing zone(9), and we address the importance of the protocol behavior when a node is in carrier sensing zone. The characteristic of the carrier sensing zone is that a node can not know when the remaining time of the on-going transmission session expires or exactly when the media becomes available. Current MAC protocol does not behave in much different way between when a node is in transmission range and in carrier sensing zone. We have conducted a comprehensive simulation to study the performance improvements. The simulation results indicate that the performance is increased and the number of dropped packets due to collision is significantly reduced as much as a half.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1555-1570
• /
• 2016

For monitoring forest fires, a real-time system to prevent fires in wider areas should be supported consistently. However, there has still been a lack of the support for real-time system related to forest fire monitoring. In addition, the 'real-time' processing in a forest fire detection system can lead to excessive consumption of energy. To solve these problems, the intelligent data acquisition of sensing nodes is required, and the maximum energy savings as well as rapid and accurate detection by flame sensors need to be done. In this regard, this paper proposes a node built-in filter algorithm for intelligent data collection of sensing nodes for the rapid detection of forest fires with focus on reducing the power consumption of the remote sensing nodes and providing efficient wireless sensor network-based forest environment monitoring in terms of data transmission, network stability and data acquisition. The experimental result showed that battery life can be extended through the intelligent sampling of remote sensing nodes, and the average accuracy of the measurement of flame detection based on the distance is 44%.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.81-88
• /
• 2017

Solar-powered wireless sensor nodes can use extra energy to obtain additional data to increase the precision. However, if the amount of data sensed is increased indiscriminately, the overhead of relay nodes may increase, and their energy may be exhausted. In this paper, we introduce a sensing and compression rate selection scheme to increase the amount of data obtained while preventing energy exhaustion. In this scheme, the neighbor nodes of the sink node determine the limit of data to be transmitted according to the allocated energy and their descendant nodes, and the other nodes select a compression algorithm appropriate to the allocated energy and the limitation of data to be transmitted. A simulation result verifies that the proposed scheme gathers more data with a lower number of blackout nodes than other schemes. We also found that it adapts better to changes in node density and the amount of energy harvested.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.689-709
• /
• 2010

In this paper, a low cost, low power but multifunctional wireless sensor node is presented for the impedance-based SHM using piezoelectric sensors. Firstly, a miniaturized impedance measuring chip device is utilized for low cost and low power structural excitation/sensing. Then, structural damage detection/sensor self-diagnosis algorithms are embedded on the on-board microcontroller. This sensor node uses the power harvested from the solar energy to measure and analyze the impedance data. Simultaneously it monitors temperature on the structure near the piezoelectric sensor and battery power consumption. The wireless sensor node is based on the TinyOS platform for operation, and users can take MATLAB$^{(R)}$ interface for the control of the sensor node through serial communication. In order to validate the performance of this multifunctional wireless impedance sensor node, a series of experimental studies have been carried out for detecting loose bolts and crack damages on lab-scale steel structural members as well as on real steel bridge and building structures. It has been found that the proposed sensor nodes can be effectively used for local wireless health monitoring of structural components and for constructing a low-cost and multifunctional SHM system as "place and forget" wireless sensors.