• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.1
• /
• pp.30-35
• /
• 2015

The most important factor within the wireless sensor network is to have effective network usage and increase the lifetime of the individual nodes in order to operate the wireless network more efficiently. Therefore, many routing protocols have been developed. The LEACH protocol presented by Wendi Hein Zelman, especially well known as a simple and efficient clustering based routing protocol. However, because LEACH protocol in an irregular network is the total data throughput efficiency dropped, the stability of the cluster is declined. Therefore, to increase the stability of the cluster head, in this paper, it proposes a stochastic cluster head selection method for improving the LEACH protocol. To this end, it proposes a SH-LEACH (Stochastic Cluster Head Selection Method-LEACH) that it is combined to the HEED and LEACH protocol and the proposed algorithm is verified through the simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1599-1610
• /
• 2019

Intelligent services have expanded as Internet of Things (IoT) technology has evolved and new requirements emerge to accommodate various services. One new requirement is transmitting data over long distances with low-power. Researchers have developed low power wide area (LPWA) network technology to satisfy the requirement; this can improve IoT network infrastructure and increase the range of services. However, network coverage expansion causes several problems. The traffic load is concentrated at a specific gateway, which causes network congestion and leads to decreased transmission efficiency. Therefore, the approach proposed in this paper attempts to recognize and then avoid congestion through gateway channel hopping. The LPWA network employs multiple channels, so wireless channel hopping is available in a gateway. Devices that are not delay sensitive wait for the gateway to reappear on their wireless channel; delay sensitive devices change the wireless channel along the hopping gateway. Thus, the traffic load and congestion in each wireless channel can be reduced improving transmission efficiency. The proposed approach's performance is evaluated by computer simulation and verified in terms of transmission efficiency.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3332-3339
• /
• 1999

TCP protocol is originally designed for the wired network in which the packet loss in mostly caused the network congestion, and thus the performance of protocol can be decreased in mobile Internet environment due to the comparatively high error rate of wireless link. This paper analyzes the influence of retransmission interference that is a major factor to the TCP performance decrease. We first build a model in order to simulate the mobile Internet environment that includes the wireless network, and then we implement a program using PARSEC simulation language and finally executed the program. Based on the simulation results, we suggest a method that reduce the effect of the retransmission interference.

• Journal of information and communication convergence engineering
• /
• v.19 no.2
• /
• pp.67-72
• /
• 2021

Wireless sensor networks (WSNs) require an enormous number of sensor nodes (SNs) to maintain processing, sensing, and communication capabilities for monitoring targeted sensing regions. SNs are generally operated by batteries and have a significantly restricted energy consumption; therefore, it is necessary to discover optimization techniques to enhance network lifetime by saving energy. The principal focus is on reducing the energy consumption of packet sharing (transmission and receiving) and improving the network lifespan. To achieve this objective, this paper presents a novel improved energy-efficient cluster-based routing protocol (IECRP) that aims to accomplish this by decreasing the energy consumption in data forwarding and receiving using a clustering technique. Doing so, we successfully increase node energy and network lifetime. In order to confirm the improvement of our algorithm, a simulation is done using matlab, in which analysis and simulation results show that the performance of the proposed algorithm is better than that of two well-known recent benchmarks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.762-771
• /
• 2005

In this paper, an efficient Adaptive quality-of-service (QoS) traffic control scheme with priority scheduling is proposed for the multimedia traffic transmission over wireless access networks. The objective of the proposed adaptive QoS control (AQC) scheme is to realize end-to-end QoS, to be scalable without the excess signaling process, and to adapt dynamically to the network traffic state according to traffic flow characteristics. Here, the reservation scheme can be used over the wireless access network in order to get the per-flow guarantees necessary for implementation of some kinds of multimedia applications. The AQC model is based on both differentiated service model with different lier hop behaviors and priority scheduling one. It consists of several various routers, access points, and bandwidth broker and adopts the IEEE 802.1 le wireless radio technique for wireless access interface. The AQC scheme includes queue management and packet scheduler to transmit class-based packets with different per hop behaviors (PHBs). Simulation results demonstrate effectiveness of the proposed AQC scheme.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1936-1939
• /
• 2002

Much recent attention on wireless technologies s put on topology-less wireless network, in which all nodes an be mobile and can communicate over wireless links, due to its ease of deployment, high flexibility and low expenses. One key in topology-less wireless network is mobile base stations (MBSs), which provides access points or mobile terminals (MTs) to wireless backbone network. MBSs can move to anywhere in accordance with changes in geographical distribution of MTs. They serve as dynamic odes. However, in order to utilize network resources and take full advantage of this topology-less network, MBSs must move to suitable position according to the current tate of network use. Moreover, MBSs have to consider the distance among them to avoid the crash and gap area of MBSs. Therefore, this paper proposes MBS movement algorithm by implementing push-pull method to fulfill the corporation of MBSs and considering the center of covered MTs or centroid to satisfy the MT coverage. From the simulation results, the proposed algorithm increases the performance of system when comparing with the centroid-based algoriom〔7〕, such as coverage area, MT coverage and call drops rate.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.6
• /
• pp.127-134
• /
• 2016

WBSN (Wireless Body Sensor Network), also called WBAN (Wireless Body Area Networks) generally, is a kind of WSN (Wireless Sensor Network) applications, which is composed of the various sensor nodes residing in human body embodied or in wearable way. The measured data at each sensor node in WBSN requires being synchronized at sink node for exact analysis for status of human body, which is like WSN. Although many time synchronization protocols for WSN has been already developed, they are not appropriate to WBSN. In this paper, a new time synchronization protocol for WBSN considering the characteristics of WBSN is proposed. The proposed scheme is not only simple, but also consumes less power, leading to increasing network life time. We will show that the proposed scheme is appropriate to WBSN by evaluating its performance by simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.477-487
• /
• 2008

Congestion control of the TCP reduces transmission rate when it detects packet loss because packet loss origines from congestion in the wired network. In the wireless network, packet loss comes from channel errors. Wired TCP degrades performance when there are wireless losses because it does not classify type of loss. These day, there are many researches which classify type of loss between congestion loss and wireless loss for wired-wireless hybrid network. For wireless TCP, many of existing algorithms are based on the estimated bandwidth or variations of packet arrival time. In this paper, we propose a new TCP scheme to distinguish the wireless packet losses from the congestion packet losses using MIB of the IEEE 802.11 MAC. We perform excessive simulations using the NS-2 network simulator and analyze the simulation results to compare the performance of the proposed algorithm to other well-known algorithms. From simulation results, we know that proposed algorithm improves performance about 12% and 32% compared with Spike algorithm and mBiaz algorithm, respectively.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.27-30
• /
• 2005

Because of unreplenishable power resources, reducing node energy consumption to extend network lifetime is an important requirement in wireless sensor networks. In addition both path length and path cost are important metrics affecting sensor lifetime. We propose a dynamic clustering scheme based on location in wireless sensor networks. Our scheme can localize the effects of route failures, reduce control traffic overhead, and thus enhance the reachability to the destination. We have evaluated the performance of our clustering scheme through a simulation and analysis. We provide simulation results showing a good performance in terms of approximation ratios.

• Journal of Internet Computing and Services
• /
• v.18 no.6
• /
• pp.65-73
• /
• 2017

Congestion occurring at wireless sensor networks(WSNs) causes packet delay and packet drop, which directly affects overall QoS(Quality of Service) parameters of network. Network congestion is critical when important data is to be transmitted through network. Thus, it is significantly important to effectively control the congestion. In this paper, new mechanism to guarantee reliable transmission for the important data is proposed by considering the importance of packet, configuring packet priority and utilizing the settings in routing process. Using this mechanism, network condition can be maintained without congestion in a way of making packet routed through various routes. Additionally, congestion control using packet service time, packet inter-arrival time and buffer utilization enables to reduce packet delay and prevent packet drop. Performance for the proposed mechanism was evaluated by simulation. The simulation results indicate that the proposed mechanism results to reduction of packet delay and produces positive influence in terms of packet loss rate and network lifetime. It implies that the proposed mechanism contributes to maintaining the network condition to be efficient.