• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2787-2794
• /
• 2011

A mesh node, a component of a mesh network, is connected with the network by dynamic routing using routing protocol and collects the information of adjacent or connected mesh nodes for its self-management and settings. Also, it relays packets between the mesh nodes and provides AP(Access Point) with its corresponding functions based on IEEE 802.11 a/b/g for clients' access to the network. In this paper, the study focused on the design and performance tests of Wireless Mesh Network(WMN) which is applied to the wireless communication network for the CBTC(Communications Based Train Control) system. The WMN was established on a K-AGT test-line (Kyeongsan city, Gyeongsangbuk-do), and to verify the applicability, its operation and performances are checked by measuring the data throughput, delay latency, quality measurements such as transmission loss, radio interference and path recovery and setup between the on-board and wayside.

• ETRI Journal
• /
• v.41 no.4
• /
• pp.452-464
• /
• 2019

The use of wireless body area networks (WBANs) in healthcare applications has made it convenient to monitor both health personnel and patient status continuously in real time through wearable wireless sensor nodes. However, the heterogeneous and complex network structure of WBANs has some disadvantages in terms of control and management. The software-defined network (SDN) approach is a promising technology that defines a new design and management approach for network communications. In order to create more flexible and dynamic network structures in WBANs, this study uses the SDN approach. For this, a WBAN architecture based on the SDN approach with a new energy-aware routing algorithm for healthcare architecture is proposed. To develop a more flexible architecture, a controller that manages all HUBs is designed. The proposed architecture is modeled using the Riverbed Modeler software for performance analysis. The simulation results show that the SDN-based structure meets the service quality requirements and shows superior performance in terms of energy consumption, throughput, successful transmission rate, and delay parameters according to the traditional routing approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3C
• /
• pp.233-240
• /
• 2012

Unlike traditional factory environment, in an industrial factory network applied wireless sensor network technologies, all procedures of discovery, identification and verification of devices should be performed in an automatic fashion. To address these challenges, we design a management system using the device registry server that we propose in this paper. In the phase of device discovery, the proposed system utilizes properties of routing protocol running in factories. Also, in the phase of identification and verification, the system uses unique and general information of a device stored within the device registration server. Such a way allows management system to reduce implementation complexity and to easily manage devices in a factory applied with a wireless network consisting of heterogeneous devices.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.139-143
• /
• 2005

In this paper, we propose the design on LNA and Down-mixer for MB-OFDM UWB using $0.18\;{\mu}m$ CMOS. LNA, Down-mixer design result shows that it covers the frequency range ken 3 GHz to 5 GHz. The LNA gain is larger than 12.8 dB, and noise figure about 2.6 dB. Double balanced differential down-mixer is designed less than 2 dB gainflatness, and it has over 30 dB LO leakage, feedthrough characteristics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.5
• /
• pp.1618-1637
• /
• 2014

Clustering wireless sensor network is an efficient way to reduce the energy consumption of individual nodes in a cluster. In clustering, multihop routing techniques increase the load of the Cluster head near the sink. This unbalanced load on the Cluster head increases its energy consumption, thereby Cluster heads die faster and create an energy hole problem. In this paper, we propose an Energy Balancing Cluster Head (EBCH) in wireless sensor network. At First, we balance the intra cluster load among the cluster heads, which results in nonuniform distribution of nodes over an unequal cluster size. The load received by the Cluster head in the cluster distributes their traffic towards direct and multihop transmission based on the load distribution ratio. Also, we balance the energy consumption among the cluster heads to design an optimum load distribution ratio. Simulation result shows that this approach guarantees to increase the network lifetime, thereby balancing cluster head energy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2020-2028
• /
• 2013

In this paper, we propose a novel analysis and design methodology based on complex network theory for wireless large-scale ad hoc networks. We also enhance the conventional analysis methods which does not sufficiently consider the effect of the wireless communication channels and extend the existing random graph theory by reflecting the wireless communication environments. As a main result, the effect of the network topology such as average degree of each communication node on the network capacity through extensive computer simulations.

• Journal of Sensor Science and Technology
• /
• v.16 no.5
• /
• pp.361-368
• /
• 2007

Small size real-time ECG signal analysis function by QRS-complex detection was put into sensor nodes. Wireless sensor nodes attached on the patient’s body transmit ECG data continuously in normal u-healthcare system. So there are heavy communication traffics between sensor nodes and gateways. New developed platform for real-time analysis of ECG signals on sensor node can be used as an advanced diagnosis and alarming system for healthcare. Sensor node does not need to transmit ECG data all the time in wireless sensor network and to server PC via gateway. When sensor node detects suspicion or abnormality in ECG, then the ECG data in the network was transmitted to the server PC for further powerful analysis. This system can reduce data packet overload and save some power in wireless sensor network. It can also increase the server performance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.307-310
• /
• 2006

In this paper, we design a prototype service in Telematics environment for providing safety warning notification at crooked roads efficiently using wireless sensor network. Through this study, we 1) analyze several requirements to be satisfied in the services, 2) design and implement the service architecture based on the requirements.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.39-42
• /
• 2006

There are various analysis functions(including prediction of path loss, analyzing of capacity and coverage, etc.) of simulation tool to design and optimize the mobile communication network. Its reliability absolutely effects the performance of mobile communication network. Especially as the wireless network highly advancing focused on data service, it more needs to research and develop on the standard establishment of reliability of the simulation tool. Also it is important the systematic research how to improve the reliability of simulation tool. In this paper, to give the concrete process and skill about how to improve reliability, we define the kinds of reliability at first. And then we explain the comparison results between real field measurement data and theoretic simulation data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1337-1342
• /
• 2012

In recent years, many researches in Home Networking are being progressed actively. Most of techniques for Home Networking are based on wired but the technique for wireless connection is also needed. This paper focuses on wireless connection in Home Networking. Of many of wireless technologies, such as Wireless LAN, Bluetooth, or HomeRF, we especially propose to apply the new technique called Wireless Sensor Network. We present hardware and protocol stack design consideration for wireless sensor node and wireless sensor network, and then we present how to apply wireless sensor network to Home Networking and how to constitute Wireless Home-Networking with a variety of sensor nodes. Finally, we introduce the wireless sensor node system designed by us and conclude this paper.