• International journal of advanced smart convergence
• /
• 제2권1호
• /
• pp.6-11
• /
• 2013

Network Coding (NC) is a new paradigm for network communication. In network coding, intermediate nodes create new packets by algebraically combining ingress packets and send it to its neighbor node by broadcast manner. NC has rapidly emerged as a major research area in information theory due to its wide applicability to communication through real networks. Network coding is expected to improve throughput and channel efficiency in the wireless multi-hop network. Many researches have been carried out to employ network coding to wireless ad-hoc network. In this paper, we proposed a dynamic queue management to improve coding opportunistic to enhance efficiency of NC. In our design, intermediate nodes are buffering incoming packets to encode queue. We expect that the proposed algorithm shall improve encoding rate of network coded packet and also reduce end to end latency. From the simulation, the proposed algorithm achieved better performance in terms of coding gain and packet delivery rate than static queue management scheme.

• ETRI Journal
• /
• 제35권1호
• /
• pp.27-34
• /
• 2013

This paper proposes a network-adaptive mechanism for HTTP-based video streaming over wireless/mobile networks. To provide adaptive video streaming over wireless/mobile networks, the proposed mechanism consists of a throughput estimation scheme in the time-variant wireless network environment and a video rate selection algorithm used to increase the streaming quality. The adaptive video streaming system with proposed modules is implemented using an open source multimedia framework and is validated over emulated wireless/mobile networks. The emulator helps to model and emulate network conditions based on data collected from actual experiments. The experiment results show that the proposed mechanism provides higher video quality than the existing system provides and a rate of video streaming almost void of freezing.

• 한국위성정보통신학회논문지
• /
• 제12권1호
• /
• pp.43-48
• /
• 2017

Recently, demands on civilian UAV (Unmanned Aerial Vehicle) has been increasing and appropriate communication system is required for the UAV. In this paper, the performance of the UAV communication system using commercial wireless mobile network is discussed. The main service area of the wireless mobile network is ground level however the flying range of the UAV is normally in high altitude. Because of this mismatch of service area the performance of the UAV communication system is degraded in high altitude. To compensate performance degradation of the UAV communications system in high altitude, adaptive array antenna is introduced which is able to overcome altitude limitation of the UAV communication system.

• International journal of advanced smart convergence
• /
• 제4권2호
• /
• pp.14-19
• /
• 2015

Recently, water sewage disposal facilities are able to manage real-time data collection and record management through compact broadband modem LAN switching technology. Therefore, it needs more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed short distance wireless communication network of compact broadband modem for sewage disposal facilities. And it received data inside of water treatment facility using the two communication methods (IEEE802.11x and IEEE802.15.4x). Then, our proposed an data-flow control algorithm of wireless network technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.321-326
• /
• 2015

Smart metering is one of the most implementable internet-of-thing service. In order to implement the smart metering, a wireless communication network should be newly designed and evaluated so as to satisfy quality-of-service of smart metering. In this paper, we consider a wireless network for the smart metering implemented with multi-purpose wireless chips and channel coding-functioned micro controllers. Especially, channel coding is newly adopted to improve successful frame transmission probability. Based on the successful frame transmission probability, average transmission delay and delay violation probability are analyzed. Using the analytical results, service coverage expansion is evaluated. Through the delay analysis, service feasibility can be verified. According to our results, channel coding needs not to be utilized to improve the delay performance if the smart metering service coverage is several tens of meters. However, if more coverage is required, chanel coding adoption definitely reduces the delay time and improve the service feasibility.

• 대한디지털의료영상학회논문지
• /
• 제5권1호
• /
• pp.130-136
• /
• 2002

One of current trends of medical technology is analog to digital. Moreover, The Government put a premium on PACS(Picture Archiving and Communication System) for Medical Insurance in November, 1999. Therefore many hospitals are installing(or planning to install) PACS facilities on their buildings. However most of hospitals didn't consider PACS facilities in the beginning of construction. In particular, the Networking is one of the most difficult things for PACS installation. There is no space for network equipments, and no path for network lines, etc. To solve these problems, wireless network is proposed. The wireless network is divided to three parts mainly. One is the wireless communication for Local Area Network, another is the data transmission through a satellite for Tele-Radiology, and the last one is the technology using Bluetooth for each sub-system of PACS. But there are other problems in wireless systems, i.e., network bandwidth, system stability, interference with other devices. The purpose of this paper is to suggest the future and new trend of PACS including all the problems.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권4호
• /
• pp.212-220
• /
• 2014

The current cellular communications are optimized for low mobility users, meaning that their performance is degraded at high speed. Therefore, passengers in a high-speed train experience very poor radio link quality due to the significantly large number of simultaneous handovers. In addition, wireless data traffic is expanding exponentially in trains, subways and buses due to the widespread use of smartphones and mobile devices. To solve the inherent problem of cellular communication networks and meet the growing traffic demand, this paper proposes the mobile hotspot network of a millimeter-wave communication system as a mobile wireless backhaul. This paper describes the physical layer design of uplink and downlink in the proposed system, and the performances of uplink and downlink are evaluated under Rician fading channel conditions. The implemented baseband prototype of the proposed millimeter-wave communication modem is presented. This system can provide a Gbps data rate service in high-speed trains carrying hundreds of wireless Internet users.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.81-84
• /
• 2005

Various design schemes for network using wireless sensor nodes have been widely studied on the several application areas ranging from the real world information collection to environmental monitor. Currently, the schemes are focused on the design of sensor network for low power consumption, power-aware routing protocol, micro miniature operating system and sensor network middleware. The indoor localization system that identifies the location of the distributed nodes in a wireless sensor network requires features dealing with mobility, plurality and other environmental constraints of a sensor node. In this paper, we present an efficient location system to cope with mobility of multiple mobile nodes by designing a location handler that processes location information selectively depending on the nodes' density in a specific region. In order to resolve plurality of multiple mobile nodes, a routing method for the location system is also proposed to avoid the occurrence of overlapped location data.

• 중소기업융합학회논문지
• /
• 제4권4호
• /
• pp.1-6
• /
• 2014

무선 센서 네트워크는 여러 지역에 퍼져 있는 다수의 센서 노드들이 무선 방식으로 연결 되어있는 그물망으로 전 세계에서 연구되고 있는 기술 중 하나이다. 그러나 자원의 제약성, 무선 통신 사용 등, 네트워크 자체적인 특성으로 인해 일반 네트워크에 비해서 보안이 매우 취약하다. 무선 센서 네트워크의 공격법은 크게 도청기반 공격, 위조기반 공격, 서비스 거부 기반 공격으로 나누어지며, 보안법으로 대개의 Sensor Network Application은 전송되는 정보의 도청 또는 수정, 잘못된 정보의 삽입 등 여러가지 공격으로부터 방어를 해야 할 필요가 있다. 이를 위한 기본적인 방법은 암호화 방법, 스위칭 기법 등을 서술 한다.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2150-2162
• /
• 2012

차세대 모바일 인터넷의 진화에 따라 2G, 3G, 4G, B4G 이동통신 무선접속네트워크가 공존하게 되며, 기존의 통신 서비스 제공자들은 통합 서비스 제공자로 융합되고, 다수의 가상 서비스 제공자들이 발생하게 될 것으로 예상된다. 이러한 복잡한 미래의 융합 서비스를 제공하기 위해서 미래 인터넷에서는 무선 액세스 네트워크가 융합되고 다양한 서비스 제공자들에 의해 공유되는 무선 네트워크 가상화가 필수적이다. 따라서 본 논문에서는 미래 무선 액세스 네트워크 상에서 여러 서비스 제공자들의 다양한 무선 액세스 기술들이 유연하게 통합 운영될 수 있는 무선 액세스 네트워크 가상화를 위한 망 구조와 가상화 시나리오에 대해서 고찰한다. 본 논문에서 도출된 차세대 이동통신 네트워크를 위한 무선 액세스 망 구조 및 가상화 시나리오는 앞으로 무선 액세스 네트워크 가상화 알고리즘 개발을 위한 기틀 역할을 할 수 있을 것으로 기대된다.