• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2603-2609
• /
• 2010

Currently at port, various trials about the improvement of operating method for raising operation efficiency of transferring equipment are made, but if the delay is occurred to quay crane due to individual team method in YT operation, the problem which even arranged YT should stop the work. Therefore, this study installed wireless location determining device within yard and measured the location of YT with real-time. Also, in order to raise the location determination effect, we converted operating method into pooling operation method and arranged YT. Through this study, we can trace the movement of YT with real-time and the work control method which anlayzes and evaluates congestion of yard objectively is prepared.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1314-1320
• /
• 2008

Recently, LBS(Location Based Service) which provides useful service based on the location of objects or human has drawn the attention of the research community. To provide LBS, many researchers have proposed many localization systems such as Cricket or Ubisense, however, these systems have the limit that it is very hard to perform the complicated computation on these systems because these systems consist of sensor nodes which have very limited computing power. In the paper, we propose a new localization system with the gateway node which has very high computing power and resource which is suitable for the complicated computation needed for localization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1200-1215
• /
• 2023

With the development of IoT and artificial intelligence, location-based services are getting more and more attention. For solving the current problem that indoor positioning error is large and generalization is poor, this paper proposes a Model Stacking Algorithm for Indoor Positioning System using WiFi fingerprinting. Firstly, we adopt a model stacking method based on Bayesian optimization to predict the location of indoor targets to improve indoor localization accuracy and model generalization. Secondly, Taking the predicted position based on model stacking as the observation value of particle filter, collaborative particle filter localization based on model stacking algorithm is realized. The experimental results show that the algorithm can control the position error within 2m, which is superior to KNN, GBDT, Xgboost, LightGBM, RF. The location accuracy of the fusion particle filter algorithm is improved by 31%, and the predicted trajectory is close to the real trajectory. The algorithm can also adapt to the application scenarios with fewer wireless access points.

• Smart Structures and Systems
• /
• v.32 no.4
• /
• pp.195-205
• /
• 2023

The contact acoustic emission (AE) monitoring system is time-consuming and costly for monitoring concrete structures in large scope, in addition, the great difference in acoustic impedance between air and concrete makes the detection process inconvenient. In this work, we broaden the conventional AE source localization method for concrete to the non-contact (air-coupled) micro-electromechanical system (MEMS) microphones array, which collects the energy-rich leaky Rayleigh waves, instead of the relatively weak P-wave. Finite element method was used for the numerical simulations, it is shown that the propagation velocity of leaky Rayleigh waves traveling along the air-concrete interface agrees with the corresponding theoretical properties of Lamb wave modes in an infinite concrete slab. This structures the basis for implementing a non-contact AE source location approach. Based on the experience gained from numerical studies, experimental studies on the proposed air-coupled AE source location in concrete slabs are carried out. Finally, it is shown that the locating map of AE source can be determined using the proposed system, and the accuracy is sufficient for most field monitoring applications on large plate-like concrete structures, such as tunnel lining and bridge deck.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2006.06a
• /
• pp.437-440
• /
• 2006

센서 네트워크는 다양한 환경에서 사용되고 있으나 지금까지 제시된 센서 네트워크의 보안 기법은 센서 네트워크가 사용되는 다양한 환경에서 모두 적용하기에는 한계가 있다. 이 논문에서는 센서 노드의 위치 정보를 이용할 수 있는 특정 환경에서 사용 할 수 있는 키 생성 기법을 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06a
• /
• pp.247-248
• /
• 2008

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.341-341
• /
• 2006

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.165-168
• /
• 2004

차량, 선박, 버스등과 같은 이동체의 위치정보를 유무선 통신망의 사용자에게 실시간으로 제공하는 방법을 기술한다. 각 이동체는 고유의 LBS번호가 지정된 GPS단말기를 탑재하고, 사용자는 유무선통신망을 통해 해당 LBS번호로 접속함으로써 이동체에 대한 위치정보서비스 및 모니터링, 오더링, SMS서비스를 호환성있게 제공받을 수 있다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.133-133
• /
• 2012

본 연구에서는 현재의 실내 위치인식시스템에 있어서 오차 발생 문제점을 초전센서를 이용하여 보완하였다. 기존의 CSS기술은 SDS-TWR(Symmetric Double-Sided Two-Way Ranging) 기반의 위치인식시스템을 구현하는 기술로 사용되고 있으나 전파의 반사 및 간섭에 의해 레인징의 오차가 크게 발생하고 수신 감도가 현저하게 떨어지는 현상이 발생한다. 따라서 본 논문에서는 환경적인 제약을 받는 공간에서 CSS을 이용한 SDS-TWR과 초전센서를 사용하여 수신불량과 오차를 줄여 사용자의 위치인식을 가능하도록 하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.211-213
• /
• 2000

사용자들이 네트워크에 의해 커버되는 영역내의 어느 곳이던지 이동할 수 있는 이동 무선 네트워크에서 어떤 이동 단말기가 다른 이동 단말기와 통신하고자 하는 경우, 먼저 목적지 이동 단말기의 위치를 찾아야 한다. 따라서 이동 단말기의 위치 정보를 관리하는 것은 이동 무선 네트워크에서 아주 중요한 문제이다. 본 논문에서는 대형 이동 무선 네트워크에 적합한 3-계층 동적 분산 위치 관리 방법을 제안한다. 여기서는 이동 단말기가 다른 셀의 이동 단말기들로부터의 위치 탐색 요청 회수를 고려하여 계층별로 협동하는 다른 위치 관리 방법을 사용하였으며, 분석적 평가를 통하여 제안하는 방법의 성능을 평가하였다.