• 센서학회지
• /
• 제28권1호
• /
• pp.64-70
• /
• 2019

Wireless sensors have been developed in numerous ways for enhancing the convenience of installation, management and maintenance of sensors. Energy harvesting wireless sensors, which can collect energy from the external environment for permanent usage without the need of recharging and exchanging batteries, have been developed and employed used in Internet of Things and at various industrial sites. Energy harvesting wireless sensors are significantly affected by the sensor lifespan to sudden variation in the external environment. Furthermore, reduction in the sensor operating timespan can greatly affect the characteristics of the devices connected through a network. In this paper, a system performance index is proposed that can comprehensively evaluate the lifespan of a solar cell wireless sensor, determine the characteristics of devices connected to the associated network, and recommend dynamic power distribution control for improving the system performance index. Improvement in the system performance index was verified by applying the proposed dynamic power distribution control to an air conditioner network system using a solar cell wireless sensor. Obtained results corroborate that the dynamic power distribution control can extend the lifespan of the incorporated wireless sensor and reduce the air conditioner's power consumption.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.349-355
• /
• 2008

In this paper, a wireless remote monitoring system for leakage current of distribution board is developed. In the developed system, signals of the leakage current of distribution board are transmitted to a monitoring system using wireless communication. The developed system is consisted of a comparative module, control module, a wireless communication module, and hand held terminal. The developed system has any facilities which can check a leakage current with real time, send to the user this fact using a wireless remote interface method. And also developed system can take precaution for an accident by leakage current.

• 한국정보통신학회논문지
• /
• 제13권6호
• /
• pp.1077-1082
• /
• 2009

무선 메쉬 네트워크는 네트워크 구성의 용이성과 비용적인 장점으로 각광받고 있는 무선 백본 네트워크 기술이다. 최근 상용화된 제품이 출시되고 있지만, 대부분의 기존 연구 기술은 시뮬레이션을 통해 성능을 분석하였다. 본 논문에서는 실제 상황을 고려하여 무선 메쉬 네트워크 테스트베드를 구축하였다. 본 테스트 베드는 무선 분산 시스템(Wireless Distribution System)과 브릿지를 응용하여 멀티채널 멀티 인터페이스와 동적인 위치기반 라우팅 프로토콜을 지원한다. 위치기반 라우팅 프로토콜은 링크 채널 변화와 물리적 거리를 고려한 메트릭을 이용하여 무선 간섭에 강하게 설계하였다. 그리고 메쉬 클라이언트들은 중앙 집중 주소 관리 서버를 통해 주소를 할당 받아 통신하며, 간이 망 네트워크 관리 프로토콜을 통해 망을 관리하도록 설계 및 구현하였다.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.239-244
• /
• 2012

In this paper, we first introduce our own binary CDMA technology. Then we propose a wireless distribution automation system using the binary CDMA technology. The major research items are the binary CDMA distribution automation system, piconet configuration for remote control and monitoring, scheduling for the transmission and reception of data, and ways of applying encryption to protect wireless packet. To verify the possibility of applying wireless transmission to the distribution automation system, we experiment the implemented system in terms of the transmission rate by applying it to a real-world environment.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.87-90
• /
• 2009

무선 메쉬 네트워크는 네트워크 구성의 용이성과 비용적인 장점으로 각광받고 있는 무선 백본 네트워크 기술이다. 최근 상용화된 제품이 출시되고 있지만, 대부분의 기존 연구 기술은 시뮬레이션을 통해 성능을 분석하였다. 본 논문에서는 실제 상황을 고려하여 무선 메쉬 네트워크 테스트베드를 구축하였다. 본 테스트 베드는 무선 분산 시스템(Wireless Distribution System)과 브릿지를 응용하여 멀티 채널 멀티 인터페이스와 동적인 위치기반 라우팅 프로토콜을 지원한다. 위치기반 라우팅 프로토콜은 링크 채널 변화와 물리적 거리를 고려한 메트릭을 이용하여 무선 간섭에 강하게 설계하였다. 그리고 메쉬 클라이언트들은 중앙 집중 주소 관리 서버를 통해 주소를 할당 받아 통신하며, 간이 망 네트워크 관리 프로토콜을 통해 망을 관리하도록 설계 및 구현하였다.

• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.602-606
• /
• 2015

This paper presents a ZigBee wireless communication system for remote diagnosis in overhead distribution power lines. The system is divided in three parts in the functional aspect - a host computer module, a remote controller module and a diagnostic system module. The host computer module designed as USB interface transmits control signals and receive data measured by sensor. The remote controller module operates the diagnostic system. Diagnostic system module communicates with internal main controller and host computer USB. Multiple communication channel is adopted for simultaneous operations of several diagnostic system. Dedicated protocol for each module is developed. The system is designed with a focus on low cost and small size suitable for lightweight and small diagnostic system.

• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.221-230
• /
• 2018

A method to control the power distribution among receivers by the load values in a single-input, multiple-output (SIMO) wireless power transfer (WPT) system is investigated. We first derive the value of loads to maximize total efficiency. Next, a simple, but effective analytical formula of the load condition for the desired power distribution ratio is presented. The derived load solutions are simply given by system figure of merits and desired power ratios. The formula is validated with many numerical examples via electromagnetic simulations. We demonstrate that with the choice of loads from this simple formula, the power can be conveniently and accurately distributed among receivers for most practical requirements in SIMO WPT systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.414-415
• /
• 2008

In this paper, we consider the development methodology of wireless monitoring system for a distribution transformer. The master/ slave devices are installed in the power distribution feeder and measure the current state of pole or ground transformers. After measuring, the devices send the measurement data to operating room through the wireless network such as RF and CDMA so that the power distribution supervisor can prevent a distribution transformer damaging caused by overloads and imbalance of loads.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.543-544
• /
• 2007

This paper introduce methods and analysis of a simple wireless sensor concept for detecting and locating faults as well as for load monitoring are presented. The concept is based on distributed wireless sensors that are attached to the incoming and outgoing power lines of secondary substations. A sensor measures only phase current characteristics of the wire it is attached to, is not synchronized to other sensors and does not need configuration of triggering levels. The main novelty of the concept is in detecting and locating faults by combining power distribution network characteristics on system level with low power sampling methods for individual sensors. This concept enables the sensor design to be simple, energy efficient and thus applicable in new installations and for retrofit purposes in both overhead and underground electrical distribution systems.

• ETRI Journal
• /
• 제34권5호
• /
• pp.655-665
• /
• 2012

Based on wideband precoding (WBP) in the multiple-input multiple-output orthogonal frequency division multiplexing system, an adaptive nonuniform codebook is presented in this paper. The relationship between the precoder distribution and spatial correlation is analyzed at first. A closed-form expression based on overlapped isosceles triangles is proposed as an approximation of the precoder distribution. Then, the adaptive codebook design is derived with the approximate distribution to minimize quantization errors. The capacity and bit error rate performance demonstrate that the adaptive codebook with WBP outperforms the conventional fixed uniform codebook.