• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.785-787
• /
• 2005

In the Bluetooth specification version 1.0, one specific frequency in one piconet was created depending upon the device clock and the Bluetooth native address at one specific time slot in the frequency hopping method. The basic hopping pattern was arranging the 79 ISM frequency band in pseudo-random fashion. Possible problem is the chance of collision of ownership of one specific frequency by more than 2 wireless devices when they are within the communication-active range. In this paper, we propose the adaptive frequency hopping method in order to resolve the possible problem so that more than 2 wireless devices communicates with their own client devices without being interfered. The proposed method was implemented with HDL later to be synthesized with an automatic EDA synthesizer and verified as well. The implemented adaptive frequency hopping circuit operated normally at 24MHz which will be the target clock frequency of the target Bluetooth device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.151-154
• /
• 2002

AP/RPCVD를 이용하여 $650^{\circ}C$의 저온에서 실리콘-게르마늄의 선택적 단결정 성장 (Selective Epitaxy Growth: SEG) 을 수행하였다. 본 실험에서는 $SiH_4$, $GeH_4$ 그리고 HCl 가스를 사용하여 잠입시간 동안 실리콘-게르마늄막을 성장시키고 연속해서 HCI 가스만을 주입하여 산화막 위에 형성되어진 작은 결정입자들을 식각하는 공정을 반복적으로 수행하였다. HCl 의 식각에 의해 한 주기의 잠입기 후에도 다시 잠입기가 존재함을 확인하였고, 이 성장법을 통하여 한 주기의 잠업시간 동안 증착할 수 있는 두께 이상으로 실리콘-게르마늄막의 선택적 성장이 가능하였다. 이는 저온 선택적 실리콘-게르마늄 성장 시 RPCVD에서 보이는 낮은 선택성과 $SiH_4$의 짧은 장입시간으로 인해 원하는 두께까지 확보하기 힘든 단점을 극복한 것이다. 선택성을 향상시키기 위해 실리콘-게르마늄 증착중 주입된 HCI의 유량에 따라 잠입시간과 증착속도에 영향을 주었으며, 연속공정을 위한 식각공정은 20sccm의 HCI을 20초간 주입하여 선택성을 유지하였다. 또한 보론 불순물의 첨가가 선택적으로 성장되는 박막의 결정성에 미치는 영향도 분석되었다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.713-718
• /
• 2012

Lumber spine range of motion has been used to measure of physical and functional impairment by various tools from a ruler to 3D kinematic devices. However, pre-existing tools have problems in either movement or accuracy and reliability limitations. Accurate devices are limited by fixed space whereas simple devices are limited in measuring complex movements with less accuracy. In order to solve the location, movement and accuracy limitations at once, we have developed a novice measurement device equipped with accelerometer sensor and gyroscope sensor for getting three-dimensional information of motion. Furthermore, Kalman filter was applied to the algorithm to improve accuracy. In addition, RF wireless communication was added for the user to conveniently check measured data in real time. Finally, the measurement method was improved by considering the movement by a reference point. An experiment was conducted to test the accuracy and reliability of the device by conducting a test-retest reliability test. Further modification will be conducted to used the device in various joints range of motion in clinical settings in the future.

• The KIPS Transactions:PartC
• /
• v.9C no.5
• /
• pp.687-698
• /
• 2002

Together with the activation of wireless Internet, the interest for various integrated methods of the existing wired and wireless e-commerces is on the rise. For the integrated wired and wireless e-commerce, firstly, the optimized security and authentication under the radio communication environment should be decided. And also the user-friendly usage is important. In this paper, we designed and implemented wired and wireless interworking Mobile Wallet on terminal that can be used through both wired and wireless methods by developing electronic wallet module for electronic payment using MIDP (Mobile Information Device Profile) based on J2ME (Java 2 Micro Edition). The characteristics of mobile wallet implemented in this paper provide the stability through encoding/decoding payment information and on-line usage on wired/wireless environments through downloading electronic wallet. In addition, we also present safe and convenient payment method for e-commerce based on wired/wireless Internet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.294-298
• /
• 2021

Recently, many electronic devices have been integrated with various kinds of wireless sensor network technologies that have been enabled with wireless network connections. These wireless sensor network devices have adopted various kinds of wireless network technologies. On the other hand, because each wireless network technology has its advantages and disadvantages, the target and purposes should be considered carefully at the beginning of the development. In particular, the approach to the magnetic sensor should be considered carefully because it has its own characteristic compared to general sensors. The magnetic field generates nonlinear data. This paper introduces the design aspects to reflect low cost and wearable devices to use in a wireless sensor network. In addition, this paper addresses how to select proper sensor network technology. As a result, wireless sensor network devices were integrated using Zigbee and showed the performance of the throughput.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.1
• /
• pp.69-78
• /
• 2017

As the smartphone-based devices are diffused and developed rapidly, they provide the convenience to the users. The abovementioned sentence technologies are being used not only in the existing sensor and wireless network technology but also in the application services of the diverse fields application services such as smart appliance, smart car, smart health care, etc. and the new fusion paradigm from the industry is presented by undertaking the researches in diverse area by the enterprises and research institutions. However, the smart environment exposes its weaknesses in the mobile terminal area, existing wireless network and IT security area. In addition, due to new and variant ways of attack, not only the critical information are disclosed However also the financial damages occur. This paper proposed the protocol to perform the smartphone-based safe device monitoring and safe communication. The proposed protocol designed the management procedure of registration, identification, communication protocol and device update management protocol and the safety against the attack techniques such as the an-in-the-middle-attack, impersonation attack, credential threat, information leaks and privacy invasion was analyzed. It was observed that the proposed protocol showed the performance improved by approximately 52% in the communication process than the existing system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5B
• /
• pp.270-276
• /
• 2007

The proposed LDS(Link-status Dependent Scheduling) algorithm in HR-WPAN(High Rate-Wireless Personal Area Network) up to now aims at doing only throughput elevation of the whole network, when the crucial device is connected with worst-link relatively, throughput of this device becomes aggravation. The proposed the WGS(Worst-case Guaranteed Scheduling) algorithm in this paper guarantees throughput of the device which is connected with worst-link in a certain degree as maintaining throughput of all devices identically even if a link-status changes, decreases delay of the whole network more than current LDS algorithm. Therefore proposed WGS algorithm in this paper will be useful in case of guaranteeing throughput of a device which is connected worst-link in a certain degree in a design of HR-WPAN hereafter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1923-1930
• /
• 2012

'No-Automobile driving Day' is one of Special option of Automobile Insurance in Republic of Korea. It option is used a system for collect to automobile driving information. However, Its system gives discomfort to users of this system. A Discomfort of this system to users is the OBD device's(Personal Car Driving Check Device) installation. A frequent installation of this device provides this OBD device's breakage to the users of this system. In this paper, for a solve this problem, studied new system design to supplement the existing system using Smartphone and WPAN(Wireless Personal Area Network).

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.2
• /
• pp.43-52
• /
• 2019

The recent technological developments of smart devices, multiple services are provided to enhance the users' quality of life including smart city, smart energy, smart car, smart healthcare, smart home, and so on. Academia and industries try to provide the users with convenient services upon seamless technological research and developments. Also, whenever and wherever a variety of services can be used without any limitation on the place and time upon connecting with different types of devices. However, security weaknesses due to integrations of multiple technological elements have been detected resulting in the leakage of user information, account hacking, and privacy leakage, threats to people's lives by device operation have been raised. In this paper, safer communication framework is suggested by device control and user authentication in the mobile network environment. After implementations of registration and authentication processes by users and devices, safe communication protocol is designed based on this. Also, renewal process is designed according to the safe control of the device. In the performance evaluation, safety was analyzed on the attack of protocol change weakness occurred in the existing system, service halt, data leakage, illegal operation control of message, and so on, which confirmed the enhanced speed approximately by 8% and 23% in the communication and verification parts, respectively, compared to the existing system.

• Journal of Biomedical Engineering Research
• /
• v.31 no.5
• /
• pp.395-400
• /
• 2010

Hypertension is the chronic disease that the 16% of total population are suffering, and it needs to be studied to find alternative treatment because of the tolerance and side effect of medications that may bother some patients. in this paper, we verified practicality of implantable electrical stimulator that can readily change stimulus magnitude and frequency. And this device is possible to stimulate baroreflex or parasympathetic nerve. Therefore we performed in vitro tests and animal experiment for device's operating conditions. This device consist of implantable electrical stimulator and extracorporeal control/monitoring system. Stimulator was designed to make 1Hz~100Hz pulses and it can change continuous or periodic pulse train type. And this device can control stimulator's function and monitor stimulator's status and patients' blood pressure at exterior of body using ZigBee module as wireless telecommunication. We verified that stimulator have error rate under 5% at 50mm depth of organs and, stimulator makes high-efficiency energy with closer position of two electrodes. Also we can confirm the performance of device that decreasing blood pressure and heart rate of a rat by electrical stimulation.