• 한국지능시스템학회논문지
• /
• 제25권1호
• /
• pp.48-56
• /
• 2015

본 논문에서는 지자기센서와 스마트폰을 사용하여 개인이동시스템(PMS)을 구현한다. 지자기센서를 사용한 PMS 제어 시스템은 탑승자가 원하는 방향으로 스마트폰을 향하게 하면 PMS는 탑승자가 원하는 방향으로 이동한다. 본 논문에서 제안한 스마트폰 제어 PMS는 지자기센서를 사용함으로써 버튼 조작에 의한 제어보다 더 직관적으로 PMS를 제어하므로 사용자에게 더욱 편리한 인터페이스를 제공한다. 그리고, PMS에 장착된 모터의 기계적 특성을 보정하기 위하여 지자기센서가 사용되었다. 또한, 본 논문은 지자기센서 기반의 PMS의 제어방법으로 절대방향과 상대방향 제어방법을 제안한다. 실험 결과로서 제안된 두 가지 방법으로 지자기센서 기반의 PMS가 편리하고 효과적으로 제어되었다.

• Journal of Information Processing Systems
• /
• 제7권1호
• /
• pp.29-42
• /
• 2011

Wireless sensor networks are composed of a large number of sensor nodes with limited energy resources. One critical issue in wireless sensor networks is how to gather sensed information in an energy efficient way, since their energy is limited. The clustering algorithm is a technique used to reduce energy consumption. It can improve the scalability and lifetime of wireless sensor networks. In this paper, we introduce a clustering protocol with mode selection (CPMS) for wireless sensor networks. Our scheme improves the performance of BCDCP (Base Station Controlled Dynamic Clustering Protocol) and BIDRP (Base Station Initiated Dynamic Routing Protocol) routing protocol. In CPMS, the base station constructs clusters and makes the head node with the highest residual energy send data to the base station. Furthermore, we can save the energy of head nodes by using the modes selection method. The simulation results show that CPMS achieves longer lifetime and more data message transmissions than current important clustering protocols in wireless sensor networks.

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.311-318
• /
• 2019

In general wireless power transfer systems (WPTSs), power transfer is controlled by the wireless communication between a transmitter (Tx) and a receiver (Rx). However, WPTS is difficult to apply in electronic products that do not have batteries, such as TVs. A WPTS with resonators based on a transformer of LLC series resonant converter is proposed in this study to eliminate wireless communication units between a Tx and an Rx. The proposed system operates at the boundary of the resonance frequency, and the required power can be stably supplied to authorized devices even though some misalignment occurs. Moreover, standby power standards for the electronic product can be satisfied.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.505-524
• /
• 2010

Wireless structural monitoring systems consist of networks of wireless sensors installed to record the loading environment and corresponding response of large-scale civil structures. Wireless monitoring systems are desirable because they eliminate the need for costly and labor intensive installation of coaxial wiring in a structure. However, another advantageous characteristic of wireless sensors is their installation modularity. For example, wireless sensors can be easily and rapidly removed and reinstalled in new locations on a structure if the need arises. In this study, the reconfiguration of a rapid-to-deploy wireless structural monitoring system is proposed for monitoring short- and medium-span highway bridges. Narada wireless sensor nodes using power amplified radios are adopted to achieve long communication ranges. A network of twenty Narada wireless sensors is installed on the Yeondae Bridge (Korea) to measure the global response of the bridge to controlled truck loadings. To attain acceleration measurements in a large number of locations on the bridge, the wireless monitoring system is installed three times, with each installation concentrating sensors in one localized area of the bridge. Analysis of measurement data after installation of the three monitoring system configurations leads to reliable estimation of the bridge modal properties, including mode shapes.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.219-220
• /
• 2009

Many surveillance cameras used in security system are controlled with RS-485 communication protocol. In this situation, if RS-485 connection can be replaced with wireless connection using sensor network technology, an installation will become ease because of no wired connection and also a deployment of cameras will become free. This paper explains about the design of wireless sensor node and the necessary implementation for an operation, which can be replacing RS-485 connection for the development of CCTV control system based on wireless sensor network. The hardware platform of sensor node was designed based on MicaZ and the software was developed based on TinyOS. To control surveillance cameras deployed on wide area, the supporting of multi-hop also was implemented. With the result of experiment deploying on real environment, it was revealed that the controller could control cameras quickly with wireless.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.77-84
• /
• 2012

This paper introduces our development of a MIMO-OTA system with simplified configuration. The key element of our proposal is the adoption of an antenna branch-controlled configuration for generating multipath delayed waves. The signal processing is carried out on IF band signal with an FPGA in a fading-emulator-type MIMO-OTA measurement system. The proposed scheme is largely different from available system configurations for the fading simulator method of constructing the OTA test environment. We describe the principle of the proposed scheme, channel model incorporated in the system, basic configuration of the developed system, and its performance.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.188-192
• /
• 1997

The purpose of this study are changing wired medical instrument's terminal into wireless and implementing BSS of Wireless Local Area Network. the wireless terminal using frequency hopping spread spectrum in ISM band transfers patients medical information data such as ECG data, Patient Disease Indication Message to AP(or Server) and it also performs that as a response of transmission request in server. we made Clinet-Server network structure support only BSS service and patient's terminal controlled by polling in server. Wireless Terminal will guarantee mobility and give doctors real time monitoring capability in office.

• 한국ITS학회 논문지
• /
• 제13권5호
• /
• pp.27-34
• /
• 2014

본 논문은 무선 채널을 노드에게 할당하여 보장하는 GTS 기반의 무선 센서 네트워크에서 다수의 노드가 같은 채널을 공유할 때, 충돌이 발생하는 것을 최대로 억제하기 위한 방안을 제시한다. 무선 자원이 충분하지 않은 조건에서 다수의 노드에게 특정 채널을 같이 할당하고, 할당한 채널을 노드들이 공유하면서 데이터를 전송한다. 데이터 전송 시, 한개 이상의 노드들이 채널을 이용하면 충돌이 발생한다. 이러한 충돌을 효과적으로 줄이기 위해, 부모가 자식 노드들에게 백오프 값들을 지정하고, 그래도 충돌이 생기는 경우, 백오프 값 변경을 시도하여 충돌을 방지한다. 제안 방안을 시뮬레이션을 통해 제안 방안이 효과적으로 백오프 값을 조절하여 충돌이 많이 감소함을 확인할 수 있었다.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.172-176
• /
• 2020

The implementation of a low phase noise voltage controlled oscillator (VCO) is important for the signal integrity of wireless communication terminal. A low phase noise wideband VCO for a wireless local area network (WLAN) application is presented in this paper. A 6-bit coarse tune capacitor bank (capbank) and a fine tune varactor are used in the VCO to cover the target band. The simulated oscillation frequency tuning range is from 8.6 to 11.6 GHz. The proposed VCO is desgned using 65 nm CMOS technology with a high quality (Q) factor bondwire inductor. The VCO is biased with 1.8 V VDD and shows 9.7 mA current consumption. The VCO exhibits a phase noise of -122.77 and -111.14 dBc/Hz at 1 MHz offset from 8.6 and 11.6 GHz carrier frequency, respectively. The calculated figure of merit(FOM) is -189 dBC/Hz at 1 MHz offset from 8.6 GHz carrier. The simulated results show that the proposed VCO performance satisfies the required specification of WLAN standard.

• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.76-86
• /
• 2005

Today's wireless access networks consist of several tiers that overlap each other. Provisioning of real time undisrupted communication to mobile users, anywhere and anytime through these heterogeneous overlay networks, is a challenging task. We extend the end-to-end approach for the handoff management in hybrid wireless data network by designing a fully mobile-controlled handoff for mobile devices equipped with dual mode interfaces. By handoff, we mean switching the communication between interfaces connected to different subnets. This mobile-controlled handoff scheme reduces the service disruption time during both horizontal and vertical handoffs and does not require any modification in the access networks. We exploit the IP diversity created by the dual interfaces in the overlapping area by simultaneously connecting to different subnets and networks. Power saving is achieved by activating both interfaces only during the handoff period. The performance evaluation of the handoff is carried out by a simple mathematical analysis. The analysis shows that with proper network engineering, exploiting the speed of mobile node and overlapping area between subnets can reduce service disruption and power consumption during handoff significantly. We believe that with more powerful network interfaces our proposal of dual interfaces can be realized.