• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.48-56
• /
• 2015

In the paper, a smartphone-controlled personal mobility system(PMS) based on a compass sensor is developed. The use of a magnetic compass sensor makes the PMS move according to the heading direction of a smartphone controlled by a rider. The proposed smartphone-controlled PMS allows more intuitive interface than PMS controlled by pushing a button. As well, the magnetic compass sensor makes a role in compensating for the mechanical characteristics of motors mounted on the PMS. For adequate control of the robot, two methods: absolute and relative direction methods based on the magnetic compass sensor and wireless communication are presented. Experimental results show that the PMS is conveniently and effectively controlled by the proposed two methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.351-356
• /
• 2011

In this paper, we design a pet location tracking and remote monitoring system that uses ultrasonic, temperature, humidity and illumination sensors to study behavioral patterns and habits. Using ultrasonic waves to calculate distances, a WSN(Wireless Sensor Network) was constructed to transmit data at pet's location, such as temperature, humidity and illumination, to a sink mote. Data received by the system are stored in the database in real time to trace pet's location. Interference among transmitting motes was eliminated by sequentially transmitting RF beacons using sink mote's beacon as the reference signal. Experiments were performed with the laboratory prototype of a pet animal monitoring system implemented for this study. The system analyzes locations of a pet and displays movement patterns, areas of movement, temperature, humidity and illumination using a GUI (graphical user interface).

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1602-1605
• /
• 2002

Communication schemes are currently changing from circuit switched towards packet switched. These changes enable access to Internet and multimedia services in wireless network. Provision of real-time IP services in air interface introduces relatively large overhead in RTP/UDP/IP headers. To reduce the overhead, the header compression schemes are required. There exist two header compression schemes (CRTP, ROHC) which are IETF standards. We propose Context-ID detection method which reduces more efficiently the packet loss rate than two existing schemes. Its performance in WCDMA system environment is evaluated for CRTP and ROHC schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1905-1913
• /
• 2006

The researches about the hardware and the software implementing ubiquitous sensor network have great rush in recent years. This paper deals the development of a sensor node with the dual interface which also has an RF wireless interface while has an Bluetooth interface used widely in present. This sensor node includes a Atmeg32 microcontroller, a Bluetooth module, a RF module. a temperature-humidity sensor. and I also develop the F/Ws controlling each modules with C language using GCC compiler. The sensor node developed can reaches 15m with Bluetooth interface and 60m with RF interface. It works stably with the voltage above 5V and it consumes currents 21mA average in idle mode, 63mA average in active mode.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.130-134
• /
• 2012

This paper introduces a home network service system using a low-cost wireless router on OpenWrt which can be remotely controled by Android devices. The proposed system consists of an embedded system development platform for home network service control based on OpemWrt embedded Linux, an embedded system development platform, a remote control on Android, and a home linghting device made by an interface board with LEDs. The prototype system is made of a wireless router of Buffalo, WZR-HP-G450H, Arduino Uno interface board with LEDs, and an Android development kit of HBE-SM5-S421. The operation was performed by TCP/IP programming for Android remote control, socket programming between Android development kit and wireless router, and UART communication programming between the interface board and wireless router. The implementation result shows that a low cost home network systme could be implemented with a wireless router.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.843-853
• /
• 2010

A successful deployment of multimedia applications over wireless environments entails improving the quality of service (QoS), not only from a technical point of view, but also considering the quality of experience (QoE) from the final user's perception. Although objective QoE measure models avoid the difficulties of subjective surveys, subjective QoE assessments are essential to understand the way users evaluate the QoS. In this work, we study the effect of a wide range of parameters on the QoE of VVoIP applications in a real wireless scenario. Through a complete statistical analysis of users' ratings, we identify the following facts. Although the use of VVoIP in wireless networks does not yet represent an advantage for users, there are great expectations for all applications under study, and with greater popularity comes higher expectations. It is easier for respondents to identify good behavior than poor behavior. Whereas the respondents' frequency of Internet use does not impact on the scores, respondents' gender does. Finally, the most determining parameters of quality from a user's perspective were instability, video quality, voice distortion, usefulness, and graphical interface.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2205-2218
• /
• 1997

We implement the CARMA-M (Collision Avoidance Radio Multiple Access-Mobile) protocol and DMP (Data-radio Multiplex Protocol) with a client/server architecture for a wireless communication netowrk. These protocols support a data transfer function between a remote computer and a mobile portable computer with a wireless modem which are proposed by dataradio in U.S.A. With the review and analysis of the proposed protocol, the impelementation methods of DMP, CARMA-M and LLC to interface the protocols are presented. Moreover the FEC technique is added to find and correct the errors generated in communication. The simulation method of a wireless network using wires is also shown to verify the implemented protocols.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.881-887
• /
• 2016

In this study, the vibration-based tactile actuator for smart wear applications is presented by using piezoelectric ceramic transducers. The compact wireless actuation system is constructed with a high voltage piezoelectric amplifier, a microcontroller, wireless communication module, and rechargeable lithium-polymer battery. For the wireless communication between a hardware and an operator, the bluetooth-based wireless communication system is prepared and the user interface is provided via smart phone applications. From a series of experimental user studies, it is demonstrated that the proposed vibro-tactile actuator based on piezoelectric ceramic transducers can be effectively applied to smart wear applications.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2015

A wireless sensor network (WSN) is designed and implemented for a freeze dryer. Freeze-drying technology is widely used in the fields of pharmacy and biotechnology as well as the food and agriculture industries. Taking into account the demand for high-resolution pressure and temperature measurements in a freeze dryer, the proposed WSN has a significant advantage of creating a monitoring environment in a freeze dryer. The proposed WSN uses a ZigBee/IEEE 802.15.4 network with an altimeter module that contains a high-resolution pressure and temperature sensor with a serial digital data interface. The ZigBee network is suitable for low-energy and low-data-rate applications in the field of wireless communication. The altimeter module is capable of sensing pressure in the range of 7.5-975 Torr (10-1300 mbar) and temperature in the range of $-40^{\circ}C$ to $125^{\circ}C$ with a DC power consumption of $3{\mu}W$. The implemented WSN is installed in a commercial laboratory freeze dryer in order to demonstrate its functionality and efficiency. A comparison with the temperature profile measured by a thermocouple installed in the freeze dryer reveals that the resolution of the temperature profile measured by WSN is superior to that measured by the thermocouple.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.9-12
• /
• 2005

In this paper. we offer a new monitoring system that controls all of the windfar. it can also apply use general wind turbine systems and real meteorological tower. We propose a hierarchical releiable monitoring system connected by wireless communication channels between monitoring host computer and modular slave measuring subsystems. Our system has two hierarchical subsystems: slave measuring systems, and supervisory host computer. We design and implement that the slave measuring subsystems is placed in meteorological tower and wind turbines, and the supervisory host computer in safety zone, The micro-controller in slave measuring system is duplicated using cold-standby method for reliability. The host computer and slave system constructs a feedback system, with wireless communication channel between them. For monitoring and command function, the supervisory computer is implemented with a Personal Computer using graphic user interface. Consequently. we can get a reliable but economic system.