• 한국통신학회논문지
• /
• 제37C권10호
• /
• pp.915-924
• /
• 2012

일반적으로 하나의 모바일 디바이스에 직비, 블루투스, 와이파이, 3G 와 같은 무선통신 인터페이스가 여러 개 구비되어 있지만 서비스를 이용할 때는 고정적으로 하나의 통신 인터페이스만 이용하고 있다. 본 논문에서는 다양한 통신 인터페이스를 효율적으로 사용하기 위하여 무선통신 인터페이스들 간의 능동적인 전환 기법을 제안한다. 이 기법은 통신 서비스에 따라 각 무선통신 인터페이스의 특징을 살려서 적합한 무선통신 인터페이스를 선택하고 전환하는 기법으로서, 전력 소비를 줄일 수 있고 인터페이스의 효율성을 높이는 효과가 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1408-1415
• /
• 2007

To operate Platform Screen Door (PSD) automatically, the operational data of PSD and the train must be interfaced properly. PSD and train are operated together by the signaling system in Automatic Train Operation (ATO) signaling system zone where interfaces are provided between PSD and train. However, the additional PSD interface system with train is required in train operating zone without the interface between PSD and train. For the PSD interface, the wireless communication system or the train status (train correct stop status / train door status) detection system has been used. Seoul Metro line No.2. has the PSD wireless communication system using 447MHz band RF. For the safety of PSD operation, it is required to prevent RF interference in the subway environment where many frequencies exist. In this paper, the PSD wireless communication system is developed using 2.4GHz band RF to prevent the interference of the wireless communication and increase the traffic of the PSD interface. Furthermore, the improved system can store, manage and display the PSD and train operational data using Human Machine Interface (HMI) in the train's driver cab.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.306-312
• /
• 2014

The ZigBee communication method, which is the most frequently applied to the LED lighting control system, has drawbacks of low-speed and low-capacity, and the communication failure possibility due to environmental influences is on the rise. Therefore, it is important to secure the communication reliability by applying an integrated interface with a wire-wireless dual-network. This paper developed a communication module, which has a platform converging and combining the ZigBee of USN environments with the PLC of power line communication environments, to implement a dualized communication interface system supporting the wire-wireless integrated protocol, and implemented a wire-wireless networking device and a control system software technology. As a result, it was automatically switched into the PLC communication within 4.4 seconds on average when there was an access failure in the ZigBee communication network, so a reliable communication network was built.

• 디지털융복합연구
• /
• 제4권1호
• /
• pp.31-41
• /
• 2006

This article introduces developing trends of an 'Ubiquitous Interface' as an access method for use of various network resources, such as public wireless networks and un-licensed wireless networks in ubiquitous sensor network environments, without troublesome settings or operations by users. 'Ubiquitous Interface' is a relatively wide sense meaning not only physical interface of specified device or between processors, but anything method for access USN. These 'Ubiquitous Interface' able to provide seamless services that adapt autonomously to the user's movements and changes in the state of wireless resources. Recently, strongly recommended current technologies are RFID, NFC, Multi-mode mobile terminal, UMA mobile terminal and Wearable computer as a future ubiquitous interface. These technologies are have to have flexibility and multiple physical communication channels for seamless service hand over and serve easy connection at huge USN to user. Also, they have to must have flexible software structure. Finally, through the 'Ubiquitous Interface', we will be experience of seamless communication and realize a real liberty of communication.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.36.3-36
• /
• 2002

$\textbullet$ Motion capture system $\textbullet$ Exoskeleton mechanism $\textbullet$ Kinematics analysis $\textbullet$ Man-machine Interface $\textbullet$ Wireless communication $\textbullet$ Control algorithm

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.108-112
• /
• 2021

For smart mobile devices, the wireless communication module is one of the hardware modules that consume the most energy. If we can build a multi-channel multi-interface environment using heterogeneous communication modules and operate them dynamically, data transmission performance can be highly improved by increasing the parallelism. Also, because these heterogeneous modules have different data rates, transmission ranges, and power consumption, we can save energy by exploiting a power efficient and low speed wireless interface module to transmit/receive sporadic small data. In this paper, we propose a power efficient data transmission method using heterogeneous communication networks. We also compared the performance of our proposed scheme to a conventional scheme, and proved that our proposed scheme can save energy while guaranteeing reasonable data delivery time.

• 한국인터넷방송통신학회논문지
• /
• 제23권5호
• /
• pp.35-40
• /
• 2023

본 논문에서는 전통적으로 대면 중심의 오프라인 접촉방식 실험 실습 위주로 진행되었던 전기 전자 제어공학 분야의 마이크로프로세서 응용 교과목 교육에서 시간적, 공간적, 물리적 제약 요소에 상관없이 언제 어디서나 가상적으로 실습할 수 있게 해주는 온라인 가상실험 시스템 구축 연구의 일환으로, 마이크로프로세서가 다른 주변장치와 무선랜을 통해 통신할 수 있게 해주는 시리얼 무선랜 가상 통신 모듈을 개발하였다. 개발된 모듈은 가상실험 시스템 내의 마이크로프로세서와 시리얼 인터페이스를 통해 연결되고, 이를 통해 송수신되는 데이터를 가상실험 소프트웨어가 수행되고 있는 호스트의 실제 무선랜 인터페이스를 통해 주변 장치들로 전송해 준다. 개발된 시리얼 무선랜 가상 통신 모듈의 기능 검증을 위해 가상실험 시스템 내의 마이크로프로세서가 호스트 컴퓨터의 무선랜 인터페이스를 통해 안드로이드 스마트폰과 데이터를 주고받는 실험을 수행하였으며, 본 연구를 통해 개발된 가상실험용 시리얼 무선랜 통신 모듈을 사용하여 가상 마이크로프로세서가 주변 실물 장치와 무선랜을 통해 통신할 수 있게 되어 마이크로프로세서 응용 교육분야에 효율적으로 활용될 수 있을 것으로 기대된다.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.399-404
• /
• 2010

We propose a seamless IPTV transport technology of mobile device. This technology uses multiple interfaces of wireless communication on mobile device. This proposal for transportation of mobile IPTV contents is more mobile and adaptable than other wireless technologies that are currently being used. Algorithm of proposed technology is as follow. When the signal strength of the connected wireless network interface of mobile device is getting lower than specified level, another wireless network interface is connected to continue downloading the IPTV contents in advance. Another connection is maintained until the signal strength of the first connected interface is stable or the interface is connected to another base station (or AP) that have good signal strength. For more seamless services, we consider classifying the packets of mobile IPTV and using dynamic content quality select techniques. Dynamic content quality selection is based on notifying transfer rate to the content delivery network (CDN) server. The proposed technology is expected to use efficiently with both mobile IPTV and the transportation of mobile P2P/P4P.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.673-676
• /
• 2003

In this paper, we designed the embedded system used for wireless LAN communication. Embedded system kernel is made from general linux kernel 2.4.18 by applying the ARM patch (2.4.18-rmk7) and the SA1100 patch(2.4.18-rmk7), then porting board level suitable to target system. The SA-1110 PCMCIA interface provides controls for one PCMCIA card slot with a PSKTSEL pin for support of a second slot. The embedded system requires external logic to complete the PCMCIA socket interface. For dual-voltage support, level shifting buffers are required for all SA-1110 input signals. Hot insertion capability requires that each socket be electrically isolated from each other, and from the remainder of the memory system. embedded system is for socket services approaching PCMCIA socket, detecting number of sockets, sensing insertion and removal, and applying power. It also provides interface with Card services. Embedded system supports Host driver for lucent chips that is installed orinoco driver cross compiled. The meaning can say that is doing wireless LAN communication through wireless LAN in imbedded system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.89-92
• /
• 2000

A wire communication module for PLC controller was developed. This system consists of RF module interface part, RS232 serial communication control part, LED display part and control S/W with GUI interface. RF communication frequency is controlled by PLL controlling and communication rate is also controlled as 1200 and 4800 bps. Communication and control status are displayed on LED. As a S/W part, graphic user interface on Window 95 O.S. was developed. To show the validity of the developed system, severial communication and control of PLC system were experemented.