• Journal of Welding and Joining
• /
• v.12 no.3
• /
• pp.18-25
• /
• 1994

최근 건축용 강구조물이 초대형화 및 초고층화됨에 따라 용접물량의 급증하고 있으나 3D 직종에 대한 회피현상으로 용접기능자의 감소 및 인건비의 급증 등으로 인하여 건축용 강 구조물 제작시 경쟁력이 갈수록 저하되고 있다. 이에 대한 자구책으로 강 구조물 제작업체에서는 생산 성을 한층 배가 시킬 수 잇는 용접시공 기술을 자체 개발하거나 외부로부터 도입하고 있다. 본 보에서는 당사를 비롯하여 여러 업체에서 최근 개발된 용접기술 특히 대전류 SAW 기법, SESNET 기법 등의 초대입열 용접기술, Metal cored wire나 TIME 기법에 의한 고능률 GMAW 기법 및 Robot 용접 등에 대하여 간략히 기술하였다. 이 용접기술들의 적용에는 대개 고가의 시설투자가 수반되나, 이는 생산성 증가에 따른 원가절감으로 충분히 상쇄될 수 있다. 그러나 상기된 용접기술들의 적용에 대한 성패는 용접장비의 특성, 용접조건의 확립, 모재의 특성 혹은 주변 자동화 기술 및 상호 종속적인 관계에 크게 의존된다. 따라서 가 강 구조물 제작업체에서는 세심한 주위환경 분석을 토대로 각 업체에 가장 합당한 용접기술을 선정 및 적용하여야 하겠다.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.5-11
• /
• 2005

Among the micro machining techniques, micro EDM is generally used for machining micro holes, pockets, and micro structures on difficult-cut-materials. Micro EDM parameters such as applied voltage, capacitance, peak current, pulse width, duration time are very important to fabricate the tool electrode and produce the micro structures. Developed micro EDM machine is composed of a 3-axis driving system and RC circuit equipped with pulse generator. In this paper, using micro EDM machine, the characteristics of micro EDM process are investigated and it is applied to micro holes, slots, and pockets machining. Through experiments, relations between machined surface and voltages and between MRR and feedrate are investigated. Also the trends of tool wear are investigated in case of hole and slot machining.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.3
• /
• pp.143-148
• /
• 2009

We have fabricated Ti metal films on Cu wire substrates by using a RF magnetron sputtering method at different RF powers (0, 30 and 60 W) in a high vacuum, and we have investigated the thin film characteristics and resistivity. The ion bombardment effect is increased by the method to superimpose RF power to DC power applied to two poles of the base; thus, the thin film is deposited at sputtering gas pressures below 1 Pa. Moreover, the thin film formation of the multilayer structure becomes possible by gradually injecting the RF power, and the thin film quality is improved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.560-560
• /
• 2012

We report a one-step fabrication method of Poly(9,9-dioctylfluorene) (PFO) nanowire array with pronounced ${\beta}$-Phase. We use liquid-bridge-mediated nanotransfer molding (LB-nTM) which is a new direct nano-patterning method based on the direct transfer of various materials from a mold to a substrate via liquid layer. The formation of the ${\beta}$-phase morphology in the resulting PFO nanowire array was evidenced by the presence of an absorption peak at 435nm. With the collection polarizer oriented parallel to the wire long axis, the PL emission was most intense and an emission dichroic ratio, DRE, of 3.7 was determined. The nanowire array have been investigated by scanning electron microscopy (SEM). Also, we simply fabricated structure of device of ITO/PFO nanowire arrays/Al and the electroluminescence spectra were recorded at various applied voltage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.121-126
• /
• 2005

This paper describes the attributes, performance and development status of a high performance capacitive torque sensor intended for use in a electric power steering (EPS) system. The EPS system is composed of torque sensor, ECU, motor, gears and etc. Among the elements, torque sensor in the steering column is one of the core technologies. The new capacitive torque sensor in this paper is developed differently from working principle and mechanical structure compare to extant torque sensors in market and patent. Based on the result of numerical analysis, a experimental equipment is made which is composed of a test jig and a capacitive sensor and validity of numerical analysis and feasibility of the torque sensor are verified.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.85-93
• /
• 2004

Electric vehicle body has to be subjected to uniform load and requires auxiliary equipment such as air pipe and electric wire pipe. Especially, the cross beam supports the weight of passenger and electrical equipments. This need to use adaptive design in initial design stage to gain economy through interchangeability between many kinds of components. This study performs the topology optimization by the concept of homogenization based on optimality criteria method which is efficient for the problem with a number of boundary condition and design variable. Therefore this provides the method to determine the optimum position and the shape of circular hole in the cross beam and then can achieve the weight minimization of electric vehicle body.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1843-1846
• /
• 1997

This paper describes the fault reducing effects of the 154 kV transmission tower by auxiliary grounding from the top of the tower to ground. The grounding surge impedance of the auxiliary grounding system is calculated by CDEGS(:Current Distribution Electromagnetic Interference Grounding and Soil Structure Analysis), and the critical lightning back flashover current and arcing horn dynamic characteristics are simulated by EMTP/TACS(:Electromagnetic Transient Program/Transient Analysis of Control Systems). The calculated results of total LFOR(Lightning Flashover Rate) shows that the LFOR can be reduced from 5.2(count/100km. year) to 3.4 by auxiliary grounding on the 154 kV transmission tower with one ground wire shielding system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.1-9
• /
• 1999

For roughened annular pipes with diameter ratios of 0.26, 0.39, and 0.56 and with Reynolds numbers ranging 13,000 to 67,000, friction factor, autocorrelation coefficients, power spectral density functions, and integral length scales for each flow condition using X-type hot wire anemometry system are experimentally investigated. Distributions of these quantities show that the times which the streamwise autocorrelation coefficients become zero first increase with decreasing the radius ratios of concentric annuli and Reynolds numbers, however the power spectra density functions increase with increasing the radius ratios and Reynolds number.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.336-339
• /
• 2011

본 논문에서는 유한요소 프로그램 (ANSYS)을 이용하여 돔격납철판 (dome containment liner plate)의 양중시 좌굴특성의 연구를 수행하였다. 원전 격납철판의 양중시, 양중 와이어(wire)의 구조적인 배치특성상 격납철판에 압축력이 유발되고, 이러한 압축력은 격납철판의 좌굴을 일으킬 수 있다. 다양한 양중인자 (lifting factors)를 고려한 격납철판 유한요소모델을 수립하고, 이러한 양중인자들의 좌굴특성에 미치는 영향을 고찰하였다. 양중 와이어의 체결위치의 높이가 낮을 수록 좌굴강도가 증가하며, 라이너 플레이트 두께에 비례하여 좌굴강도가 증가하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.33-38
• /
• 2007

This paper reports an attempt to develop 7-wire steel tendon which is instrumented with optical FBG sensors. The tendon is devised to replace the king cable, which is located in the center of the tendon, by a steel tube in which the FBG sensor are attached along the hole using a high-mobility polyester resin. The circular steel tube has typical of 5 mm outer diameter and 1 mm inner diameter, and can easily be manufactured by means of an pultrusion process. Using the tube, in this study, three different types of one meter-long smart tendons are fabricated depending on mixture ratio of polyester resin and initiator. The performance of the FBG sensors as well as mechanical characteristics of the prototype are tested through the tensile test. Test results shows that the proposed smart tendon is in principle very effective for measuring the working strain of the tendon.