• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.679-681
• /
• 2005

The materials for transmission line construction were transported by road which opened in mountainous areas until the mid 1990s, However, from the mid 1990s, as social interest in the environment standard increases, a cable way and helicopter transport methods of construction have been applied to minimize damage to the environment and to build an environmental friendly system. The current cable way method is a single cable way system which has a lower section base to load materials into a carriage and carry them to the tower construction site by use of an engine and a main rope. Then the carriage lowers itself via a slope between the tower construction site and the lower section base. The single cable way system has the demerits of site acquisition for the lower section base, forest felling when installing the wire rope, and it is not applicable to a even topology Also it has to be installed separately at each tower site. Accordingly, to carry materials without forest felling and regardless of slope, the chain cable way system was developed to provide materials for more than two towers consecutively by use of an engine carriage and winch.

• 대한조선학회논문집
• /
• 제57권5호
• /
• pp.254-261
• /
• 2020

The structural safety of hydraulic winch drum and the gears are estimated by the Finite Element Analysis (FEA) and the winch operation experiment. The mesh convergence test is performed and the applied force is the pressure on the drum converted from the rope tension in working condition. The stress of the drum calculated from the strain values of the winch operation experiment shows the agreement with that from the FEA. Most stress values are under the yield strength except for the small hole made for the wire rope fixation. The life of bearings in the drum is calculated using the life prediction formula with the reaction forces from the operation load. One of the two ball bearings shows the short life for impact condition, yet the real prototype winch system shows more life than the numerical value.

• Journal of the Korean Wood Science and Technology
• /
• 제51권6호
• /
• pp.526-541
• /
• 2023

Wooden structures are widely used, particularly in earthquake zones, owing to their light weight, ease of application, and resistance to the external environment. In this study, we aimed to improve the mechanical properties of laminated timber beams using novel hybrid systems [carbon-fiber-reinforced polymer (CFRP) and wire rope]. Within the scope of this study, it is expected that using wood, which is an environmentally friendly and sustainable building element, will be more economical and safe than the reinforced concrete and steel elements currently used to pass through wide openings. The structural behavior of the hybrid-reinforced laminated timber beams was determined under the loading system. The experimental findings showed that the highest increase in the values of laminated beams reinforced with steel ropes was obtained with the 2N reinforcement, with a maximum load of 38 kN and a displacement of 137 mm. Thus, a load increase of 168% and displacement increase of 275% compared with the reference sample were obtained. Compared with the reference sample, a load increase of 92% and a displacement increase of 14% were obtained. Carbon fabrics placed between the layers with fiber-reinforced polymer (FRP) prevented crack development and provided significant interlayer connections. Consequently, the fabrics placed between the laminated wooden beams with the innovative reinforcement system will not disrupt the aesthetics or reduce the effect of earthquake forces, and significant reductions can be achieved in these sections.

• 한국지반환경공학회 논문집
• /
• 제3권4호
• /
• pp.59-66
• /
• 2002

낙석방지울타리의 설계는 지반의 종류 및 사면경사 그리고 상부 및 하부지반조건을 고려하여 실시된다. 도로절개면에 설치되는 낙석방지울타리는 사면으로부터 발생한 낙석을 적절히 지지하여 도로로의 유입을 차단하기 위해 설치한다. 낙석방지울타리의 구조적 규격은 가정된 낙석에너지에 의해 산정되며, 낙석방지울타리의 흡수가능에너지는 구성요소인 철망, 지주 및 와이어로프 각각의 흡수가능에너지 합으로 규정하고 있다. 그러나 현장시험결과 적은 낙석에너지로도 경우에 따라서 낙석방지울타리가 지지하지 못하는 경우도 있었다. 따라서 본 논문에서는 현행 낙석방지울타리에 대한 설계기준의 문제점을 파악하고 이를 보완하기 위한 방법을 제안하고자 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.153-162
• /
• 2005

The structural specification of the rockfall prevention fence installed on the road section is computed according to the hypothetic rockfall energy, and the absorbable energy of the rockfall prevention fence is defined as the sum of the absorption energies of the wire rope, one of the components, the steel support and the wire netting. But the results of the field tests confirmed that the absorption energy of the rockfall prevention fence is not the sum of the energies sustainable by the components, but it is affected by the absorbable energy of part of the components. This shows there are problems with the method of computing the absorption energy of the rockfall prevention fence of the road. So in this paper, as a way of solving the problems, the effects of improving the performance through positional changes of the existing components and the effects of improving the performance through structural changes by expanded metal are checked through tests, and a plan was proposed to solve the problems with the standards of installing the conventional rockfall prevention fence.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.56-63
• /
• 2018

이 연구에서는 연성중심의 보강을 위하여 벽체의 양단부에서 경계요소를 형성하는 내진 보강공법이 적용된 벽체의 반복 휨 거동을 평가하였다. 벽체 경계요소에서 구속효과를 위한 횡보강은 프리스트레스트 와이어로프를 사용하였다. 주요 변수는 제시된 단면 확대공법의 보강 높이로 하였다. 최소 보강 높이는 보강 벽체와 기존 벽체의 모멘트 분포의 비교로부터 결정하였다. 실험결과, 제시된 보강방법은 벽체의 휨 강성 및 연성향상에 매우 효율적이었는데, 최대내력 시 강성과 최대내력의 80%지점에서 산정한 일손상지수는 무보강 벽체에 비해 각각 평균 46%와 210% 증가하였다. 보강높이가 벽체의 일손상지수 증가에 미치는 영향은 보강높이가 $2.0l_w$ 이상일 때 중요하지 않았다. 보강된 벽체의 휨 내력은 ACI 318-14에서 제안하는 등가응력블록을 통한 예측 값보다 22% 이상 높았다.

• 한국지반환경공학회 논문집
• /
• 제23권2호
• /
• pp.5-12
• /
• 2022

본 연구는 기존 낙석방지울타리의 시험 방법 중 수직 낙하시험을 중심으로 낙석방지울타리의 성능평가에 대한 시험방법을 제시하기 위해 현장시험을 실시하였다. 국내의 낙석방지울타리 지지 능력을 알아보는 시험은 보통 철망, 지주, 와이어로프를 합친 것으로 시험을 실시하며, 낙석의 충돌위치를 철망의 중앙을 중심으로 실시해 왔다. 하지만 실제 현장에서 낙석이 철망이 아닌 지주에 직접 타격했을 경우, 즉 지주에 직접 타격에 관한 국내 시험적 논문 및 데이터가 전무한 것으로 파악되었다. 따라서 낙석방지울타리(고속도로 형식 2호)를 중심으로 100kJ급의 낙석에너지에 대한 충격을 지주에 타격 했을 시 변위량을 분석하고 기존의 낙석방지울타리 시험과 비교·분석하였다.

• 대한수의학회지
• /
• 제63권3호
• /
• pp.24.1-24.6
• /
• 2023

This study compared the biomechanical properties of bone-stapling techniques with those of other fixation methods used for stabilizing tibial tuberosity fractures using 3-dimensionally (3D)-printed canine bone models. Twenty-eight 3D-printed bone models made from computed tomography scan files were used. Tibial tuberosity fractures were simulated using osteotomy. All samples were divided into 4 groups. Group 1 was stabilized with a pin and tension-band wire; group 2, with a pin and an 8 mm-wide bone staple; group 3, with 2 horizontally aligned pins and an 8 mm-wide bone staple; and group 4 with a 10 mm-wide bone staple. Tensile force was applied with vertical distraction until failure occurred. The load and displacement were recorded during the tests. The groups were compared based on the load required to cause displacements of 1, 2, and 3 mm. The maximum failure loads and modes were recorded. The loads at all displacements in group 4 were greater than those in groups 1, 2, and 3. The loads at 1, 2, and 3 mm displacements were similar in groups 1 and 3. There was no significant difference between groups 1 and 3. Groups 1 and 4 provided greater maximum failure loads than groups 2 and 3. Failure occurred because of tearing of the nylon rope, tibial fracture, wire breakage, pin bending, and fracture around the bone staple insertion. In conclusion, these results demonstrate that the bone-stapling technique is an acceptable alternative to tension-band wire fixation for the stabilization of tibial tuberosity fractures in canine bone models.

• 동력기계공학회지
• /
• 제7권4호
• /
• pp.74-81
• /
• 2003

An LQ controller design method is proposed for effective anti-sway control of boom type crane in this paper. It is important for high productivity that the sway of a load is controlled as fast as possible when the trolley arrives to the destination with maximum velocity. To prove the effectiveness of the proposed LQ controller. simulations and experiments using the boom type crane as experimental device is carried out. Tracking performance for a step type reference and robustness for the change of working environment such as the change of load weight and parameters produced by a wire rope and disturbance by the wind arc proved by the experiment. It will be examined that boom type crane can be applied to industrial fields through experiment in this paper.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.71-77
• /
• 1999

Exposed gas pipeline in underground, especially subway construction site, has been continuously vibrated by vehicle above ground. Because this vibration can cause unexpected damages to pipeline, we had measured and analyzed the vibration. This paper presents results of the vibration analysis of exposed gas pipeline and the results are as follows. The major vertical vibration frequency of pipeline was about 13 Hz and the other frequency components disappeared when the vibration transmitted to I-beam and wire rope. Existence of wooden casement had not affect vibration of exposed gas pipeline. The results of modal analysis by experimental and analytical methods have good agreement and it is also shown that exposed pipeline has possibility of resonance at second mode.