• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.28-31
• /
• 2001

Recently, in order to satisfy the consumer's demand the life cycle and the lead-time of a product is to be shortened. It is thus important to reduce the time and cost in manufacturing trial products. Several techniques have been developed and successfully commercialized in the market RPM(Rapid Prototyping and Manufacturing). However, most commercial systems currently use resins or waxes as the raw materials. So, the limited mechanical strength for functional testing is regarded as an obstacle towards broader application of rapid prototyping techniques. To overcome this problems, high-speed machining technology is being investigated worldwide for rapid manufacturing and even for direct rapid tooling application. In this paper, some fundamental experiments and analyses are carried out to obtain the filling time, materials, method, and process parameters for HisRP process. HisRP is a combination process using high-speed machining technology with automatic filling. In filling process, Bi58-Sn alloy is chosen because of the properties of los-melting point, low coefficient of thermal expansion and enviromental friendship. Also the use of filling wire is of advantage in term of simple and flexible mechanism. Then the rapid manufacturing product, for example a skull, is machined for aluminum material by HisRP process with an automatic set-up device of 4-faces machining.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.88-94
• /
• 2002

Recently, the life cycle and the lead-time of a product are to be shortened in order to satisfy consumer's demand. It is thus important to reduce the time and cost in manufacturing trial products. Several technique have been developed and successfully commercialized in the market of RPM(Rapid Prototyping and Manufacturing). However, most commercial systems currently use resins or waxes as the raw materials. So, the limited mechanical strength for functional testing is regarded as an obstacle towards broader application of rapid prototyping techniques. To overcome these problems, high-speed machining technology is being investigated worldwide for rapid manufacturing and even for direct rapid tooling application. In this paper, some fundamental experiments and analyses are carried out to obtain the filling time, materials, method, and process parameters for HisRP(High-Speed RP) process. HisRP is a new RP process that is combined high-speed machining with automatic filling. In filling process, Bi58-Sn alloy is chosen as filling material because of the properties of low-melting point, low coefficient of thermal expansion and no harm to environment. Also the use of filling wire it if advantage since it needs simple and flexible mechanism. Then the rapid product, for example a skull, is manufactured for aluminum material by HisRP process with an automatic set-up device thor 4-faces machining.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.823-829
• /
• 1986

본 연구에서는 와동의 대류속도를 H.H. Brunn의 방법과 달리 측정하였으며, 또 이를 이용하여 와동의 중심들 사이의 간격을 구하고자 한다. 이를 위하여 먼저 포텐셜코어영역(potential core region)과 혼합층영역(mixing layer region)의 경계 및 천이영역(transition region)과 난류영역(turbulent region)경계를 구하여야 한다. 각 영역들의 대체적인 구분은 Fig.1과 같다.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1083-1095
• /
• 2016

The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR) has been developed and the validation and verification (V&V) activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1), produced satisfactory results, which were used for the computer codes V&V, and the performance test results of the model pump in sodiumshowed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs) have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results.

• 한국자기학회지
• /
• 제25권3호
• /
• pp.87-91
• /
• 2015

본 논문에서는 코일건 발사 시스템의 성능 향상을 위한 솔레노이드 설계에 대해 연구하였다. 즉, 코일건 솔레노이드의 코일 직경에 따른 피투사체의 발사속도에 대한 분석을 수행하였다. 코일건은 자기력을 이용하여 피투사체를 발사시키는 시스템이다. 솔레노이드에 순간적으로 큰 전류를 흘려주면 코일 주위에 순간적인 자기장이 만들어지고, 발사체는 플레밍의 오른손 법칙에 따라 코일의 중심 방향으로 자기력을 받아 발사된다. 피투사체의 발사 속도는 솔레노이드 코일이 생성하는 자기력과 비례한다. 하지만, 솔레노이드 코일은 규격에 따른 최대허용 전류가 존재한다. 따라서, 한계 전류 내에서 피투사체에 작용하는 자기력이 최대가 되는 솔레노이드 코일의 설계가 필요하다. 본 논문에서는 솔레노이드 코일의 설계를 위해 AWG(American Wire Gauge)6부터 AWG18까지의 코일의 직경에 따른 최적의 권수를 찾아서 발사가능여부와 그에 따른 발사속도를 비교 분석한다.

• 한국정보처리학회논문지
• /
• 제6권1호
• /
• pp.193-202
• /
• 1999

음성뿐만 아니라 데이터, 화상 및 영상 등의 고품질 서비스를 제공하는 제 3세대 이동통신(IMT-2000 : International Mobile Telecommunications-2000)은 2000년대 초에 전체 통신 서비스의 50% 정도를 점유할 것으로 예견된다. 한편 개인의 이동성을 보장할 수 있는 UPT(Universal Personal Telecommunications) 서비스는 다양한 종류의 유무선망을 단일 번호로써 을 수 있는 중요한 서비스로 인식되고 있다. 본 논문은 차세대 지능망 서비스를 지원하는 IMT-2000 교환기의 시스템 구조 및 소프트웨어 블록 형상을 제안하고 지능망 기능 지원에 필요한 교환기 내부의 서비스 교환 기능을 설계한다. 또한 제안된 구조와 서비스 교환 기능을 적용하여 차세대 지능망 서비스의 대표적인 서비스인 UPT 서비스의 호 시나리오를 설계한다. 특히 IMT-2000 교환기 내부 소프트웨어 블록간 호 흐름에 바탕을 둔 UPT 서비스기능 구현에 초점을 두어 UPT 서비스 호 시나리오를 설계한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1994년도 제3회 학술강연회논문집
• /
• pp.21-26
• /
• 1994

Conventional electroexplosive devices (EED) commonly use a very small metal bridgewire to ignite explosive materials i.e. pyrotechnics, primary and secondary explosives. The use of semiconductor devices to replace “hot-wire” resistance heating elements in automotive safety systems pyrotechnic devices has been under development for several years. In a typical 1 amp/1 watt electroexplosive devices, ignition takes place a few milliseconds after a current pulse of at least 25 mJ is applied to the bridgewire. In contrast, as for a SCB devices, ignition takes place in a few tens of microseconds and only require approximately one-tenth the input energy of a conventional electroexplosive devices. Typically, when SCB device is driven by a short (20 $\mu\textrm{s}$), low energy pulse (less than 5 mJ), the SCB produces a hot plasma that ignites explosive materials. The advantages and disadvantages of this technology are strongly dependent upon the particular technology selected. To date, three distinct technologies have evolved, each of which utilizes a hot, silicon plasma as the pyrotechnic initiation element. These technologies are 1.) Heavily doped silicon as the resistive heating initiation mechanism, 2.) Tungsten enhanced silicon which utilizes a chemically vapor deposited layer of tungsten as the initiation element, and 3.) a junction diode, fabricated with standard CMOS processes, which creates the initial thermal environment by avalanche breakdown of the diode. This paper describes the three technologies, discusses the advantages and disadvantages of each as they apply to electroexplosive devises, and recommends a methodology for selection of the best device for a particular system environment. The important parameters in this analysis are: All-Fire energy, All-Fire voltage, response time, ease of integration with other semiconductor devices, cost (overall system cost), and reliability. The potential for significant cost savings by integrating several safety functions into the initiator makes this technology worthy of attention by the safety system designer.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.166-173
• /
• 2011

In this paper, we implemented and analyzed a wireless power transfer (WPT) system with a CSPR topology. CSPR refers to constant current source, series resonance circuit topology of a transmitting coil, parallel resonance circuit topology of a receiving coil, and pure resistive loading. The transmitting coil is coupled by a magnetic field to the receiving coil without wire. Although the electromotive force (emf) is small (about 4.5V), the voltage on load resistor is 148V, because a parallel resonance scheme was adopted for the receiving coil. The implemented WPT system is designed to be able to transfer up to 1 kW power and can operate a LED TV. Before the implementation, the EMF reduction mechanism based on the use of ferrite and a metal shield box was confirmed by an EM simulation and we found that the EMF can be suppressed dramatically by using this shield. The operating frequency of the implemented WPT system is 30.7kHz and the air gap between two coils is 150mm. The power transferred to the load resistor is 147W and the real power transfer efficiency is 66.4 %.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.59-65
• /
• 2006

Steel, as a reinforcing mechanism in concrete, provides the tensile strength that is lacking in concrete, alone, and the high alkaline environment (pH 12.5) in concrete offers satisfactory protection against most corrosion of the steel. However, the corrosion of reinforcing steel in concrete can occur by chloride attack or carbonation, and it can cause a loss of integrity a section and concrete failure through cracking and spalling. In this study, a transient electro magnetic method (TEM) of a nondestructive technique is adapted to study the measuring method of steel corrosion in mortar. The sensor was made of an enameled wire, with a diameter of 0.25mm and anacril. He sensor configuration used was a coincident loop type. The secondary electro motive force (2nd EMF) was measured with SIROTEMIII, which equipped the accelerator. The accelerator allowsthe transmitter to turn off approximately $10\sim15$ times faster than normal. The high-resolution time series, used for very shallow or a high resistivity investigation was selected. After steels were corroded by the salt spray, during 4, 8, 15 and 25 days, they were embedded in mortar. The content results acquired in this study are as follows. The variation of the secondary electro motive force (2nd EMF) was shown by the change of steel surface with different corrosion time steel. It was confirmed that measurement of steel corrosion in mortar by a transient electro-magnetic method (TEM) can be possible.

• 한국정보통신학회논문지
• /
• 제8권6호
• /
• pp.1096-1101
• /
• 2004

급증하는 인터넷 이용자로 인한 인터넷 트래픽의 폭발적인 증가는 라우터에서 패킷 전달의 병목현상을 일으켜 망의 성능에 큰 영향을 미치고 있다. 이러한 문제점을 해결하기 위해 고속 대용량 라우터 시스템은 분산형 시스템 구조를 갖는다. 분산형 라우터 시스템은 메인카드 프로세서에서 라우팅 테이블(Routing Table)을 관리하고 IPC(Inter processor Communication)를 통해 라인카드 프로세서로 포워딩테이블(Forwarding Table)을 전달하게 함으로서 패킷처리가 분산되어 wire-speed로의 포워딩 기능을 가능하게 하여 망의 성능을 개선시키는 효과를 갖는다. 이와 같은 프로세서의 분산은 각종 정보의 원활한 교환을 위해 IPC 기능을 필요로 하며, 특히 이더넷을 이용한 IPC의 구성은 비용 대비효과 측면에서 주로 사용되고 있다. 그러나 IPC를 통해서 처리하여야만 하는 OAM(Operation, Administration and Maintenance) 및 상위 프로토콜 관련 패킷의 증가로 IPC의 처리에서 병목현상이 발생하게 되었다. 본 논문에서는 기존 IPC의 TCP/IP(또는 UDP/IP)를 통한 2-계층 처리를 단일계층에서 처리할 수 있는 구조인 R-IPC(Reduced IPC) 프로토콜을 제안함으로써 평균 10%이상의 패킷처리 성능개선을 가져왔다.