• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.71-74
• /
• 2008

Belt Integrated Seat(BIS) has many advantages compared to the existing seats. Due to the development of materials and manufacturing technology, BIS, which has been used restrictely in the past, has gone through a rapid growth. As a result, its advantages have gained attention and the possibility of replacing the existing seats has grown. The need to develop BIS has risen and presently joint development with associated industries is in progress. For its first goal, the development and research of Recliner sensor has been selected. Recliner sensor is an essential part of the BIS in which the belt is incorporated onto the seat. In seat-belts, there is an inclination sensor which locks the belt according to the angle of a car. Because the inclination sensor can change frequently depending on the back of seat, a device which can enhance the inclination sensor according to the angle of the back of seat. It is the Recliner sensor that play's this role. Studies on Recliner sensor within and outside Korea has not yet made a salient progress, and due to this fact, the joint development has made a start by benchmarking other company's products. Currently, in other to set the course of the development, a research in patents and various other information is being done. In addition, for the purpose of developing a product which will be compatible with the existing products, a prototype will be made and tested before a new product makes its launching on the market.

• International Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.34-43
• /
• 2014

The STEP Cube Lab (Cube Laboratory for Space Technology Experimental Projects) is a 1U cube satellite developed by the Space Technology Synthesis Laboratory of Chosun University to be launched in 2015. Its mission objective is twofold: to determine which of the fundamental space technologies researched at domestic universities, will be potential candidates for use in future space missions and to verify the effectiveness of the technologies by investigating mission data obtained from on-orbit operation of the cube satellite. In this paper, a structural design concept based on the 1U standard to achieve the mission objective is introduced. The validity of the design has been demonstrated by quasi-static analysis and modal analysis. In addition, a non-explosive separation device triggered by burn wire heating, which is one of the main mission payloads is introduced.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.70-74
• /
• 2006

In this paper, We propose the real-time monitor and control mechanism based-on web service for intelligent robot called URC(Ubiquitous Robotic Companion). URC is intelligent robot designed to interact with external digital device that can communicate through wire or wireless. In this paper, we designed the result of this study into the target robot called NETTORO and proved its practical worth. we optimized web-service technology in Embedded system environment so that can monitor and control indoors in remote place through acquired information from various sensors / actuators and then we designed. Also, we described command port to WSDL, so that can apply variously such as web server or application program in AXIS engine through gSOAP transmission protocol.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.357-360
• /
• 2002

Nowadays, the improvement and development of Multi-media, information and communication technology are rapidly processed. And many products, for example, digital camera, digital camcorder, and PDA, are used for them. They need large data storage capacity and small size, light storage system. Due to that, many studies and researches in data storage system have been carried out. Especially, micro drive system was presented by IBM.(1) However, its system is expensive and uneasy to be portable. In ODD technologies, 1 inch drive system is not yet or in processing status.(2) If to be possible and to be come up, it is cheap than HDD system and easy to transfer information. In this paper, a miniaturized actuator(about linch) is designed and tested for ODD system. Specially, it is adapted for NFR(Near-field Recoding) system using SIL(Solid Immersion Lens). It is the dual-servo actuator which consists of a coarse actuator and fine actuator. Its actuating force generation method is VCM(Voice Ceil Motor). The fine actuator has 4-wire suspensions and bobbin wrapped by coil and includes focusing motion as well as tracking motion. The coarse actuator has an actuating coil and V-grooved guide mechanism. Also, the characteristics of the designed actuator is estimated by sine-swept mode and LDV(Laser Doppler Vibro-meter).

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10c
• /
• pp.575-580
• /
• 2006

인터넷 네트워크에 존재하는 방화벽(Firewall) 또는 라우터(Router) 장비에서의 패킷 필터 기능은 모든 방화벽 장비의 기본적인 기능이 될 수 있다. 하지만 최근에 등장한 세션기반의 악의적 침입과 바이러스의 출현으로 패킷 필터기는 단순한 정적 패킷 필터 기능이 아닌 상태기반 패킷 필터의 동적 패킷 필터 기능을 요구하게 되었다. 또한 최근에 인터넷 속도가 급증하는 환경변화에 맞추어 방화벽 장비의 TCP 패킷 처리기능은 매우 빠른 처리속도를 요구하고 있다. 이에 우리는 매우 빠른 고속의 TCP 상태기반 패킷 필터 처리를 요구하는 에지(Edge)급 라우터의 방화벽 옵션카드를 만들기 위해 하드웨어 기반의 TCAM(Ternary CAM) 관리를 이용한 TCP 세션 상태기반 (Stateful) 패킷 필터기를 구현하였으며, TCAM 제어와 패킷의 상태기반 검사 등 모든 기능처리는 FPGA(Field Programmable Gate Array)를 이용한 하드웨어 로직(Logic) 및 상태기(State Machine)로 구현하였다. 그리고 본 논문의 구현방식을 적용한 방화벽 옵션카드는 인-라인(In-line) 모드로 구성될 경우 1GHz 이상의 Wire Speed를 만족하는 처리성능을 보여주었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1253-1263
• /
• 1994

The experimental study is carried out to identify the combustion generated noise mechanism in free turbulent jet diffusion flames. Axial mean fluctuating velocities in cold and reacting flow fields were measured using hot-wire anemometer and LDv.The overall sound pressure level and their spectral distribution in far field with and without combustion were also measured in an anechoic chamber. The axial mean velocity is 10-25% faster and turbulent intensities are about 10 to 15% smaller near active reacting zone than those in nonreacting flow fields. And sound pressure level is about 10-20% higher in reacting flow fields. It is also shown that the spectra of the combustion noise has lower frequency characteristics over a broadband spectrum. These results indicate that the combustion noise characteristics in jet diffusion flames are dominated by energy containing large scale eddies and the combusting flow field itself. Scaling laws correlating the gas velocity and heat of combustion show that the acoustic power of the combustion noise is linearly proportional to the 3.8th power of the mean axial velocity rather than 8th power in nonreacting flow fields, and the SPL increases linearly with logarithmic 1/2th power of the heat of combustion.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.357-360
• /
• 2009

The present study focused on the segmented cell which has the similar performance to unaltered (not segmented) cell in real operating condition. Many literatures have been made the segmented cell to observe the behavior of local current density distribution in the single cell. However, it has been lack of scheme to segment the cell in that the detailed interpretation of segmenting in analytic point of view was insufficient. Hence, the basic idea of segmenting was introduced to determine the component to be segmented in anode side of unit cell. The electrical contact/bulk resistance was measured by using four wire/probe method through each part of cell components including MEA, GDL, Bipolar Plate and Current Collector. Electron transport mechanism was predicted by comparing resistance values which were obtained from the experiment. As a result, this offered a great benefit to segment the cell efficiently. With this method further experiments would be conducted in research areas which require current density distribution at the same operating condition as unaltered cell.

• Earthquakes and Structures
• /
• v.12 no.6
• /
• pp.699-712
• /
• 2017

This study evaluates the effectiveness of a newly developed retrofitting scheme for masonry-infilled non-ductile RC frames experimentally and by numerical simulation. The technique focuses on modifying the load path and yield mechanism of the infilled frame to enhance the ductility. A vertical gap between the column and the infill panel was strategically introduced so that no shear force is directly transferred to the column. Steel brackets and small vertical steel members were then provided to transfer the interactive forces between the RC frame and the masonry panel. Wire meshes and high-strength mortar were provided in areas with high stress concentration and in the panel to further reduce damage. Cyclic load tests on a large-scale specimen of a single-bay, single-story, masonry-infilled RC frame were carried out. Based on those tests, the retrofitting scheme provided significant improvement, especially in terms of ductility enhancement. All retrofitted specimens clearly exhibited much better performances than those stipulated in building standards for masonry-infilled structures. A macro-scale computer model based on a diagonal-strut concept was also developed for predicting the global behavior of the retrofitted masonry-infilled frames. This proposed model was effectively used to evaluate the global responses of the test specimens with acceptable accuracy, especially in terms of strength, stiffness and damage condition.

• The Journal of the Korea Contents Association
• /
• v.6 no.8
• /
• pp.8-19
• /
• 2006

In the ubiquitous environment, the real-time remote control and monitoring technology for intelligent robot creates service as a sharable and independent of time-location for various contents to get from a sensor or camera of the robot. In this paper, We propose the real-time monitor and control mechanism for intelligent robot called URC(Ubiquitous Robotic Companion). URC are intelligent robots designed as to interact with external digital device that can communicate through wire or wireless by integration the network and information technology into traditional robot. It has been carried out by implementing this technology into the target robot called ISSAC4 and proving its practical worth. We designed feasibly to control on remote site by web-browser. It guarantees a continuity of real-time image transferring by Client-Pull method.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.136-139
• /
• 2006

In this paper, We are proposed the real-time monitor and control mechanism for intelligent robot called URC(Ubiquitous Robotic Companion). URC are intelligent robots designed as to interact with external digital device that can communicate through wire or wireless by integration the network and information technology into traditional robot. In this paper, we implemented the result of this study into the target robot called ISSAC4 and proved its practical worth. We designed it as be able to control on remote by such web browser as anywhere and anytime that show a status information for several controllers, devices, actuators and sensors of robot and guarantee a continuity of real-time image transferring by Client-Pull method and moving control of robot.