• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.288-291
• /
• 2001

It is very important to select suspension solution for forming electrophoretic deposited YBCO thick mm, because it is heavily affected to its superconducting properties. In this paper, high-temperature superconductor films of $YBa_{2}Cu_{3}O_{7-x}$ were fabricated by electrophoretic deposition (EPD) from alcohol-based suspension such as iso-propanol, iso-butanol, and their mixture. For the formation of YBCO dense and adherent coating on a silver wire by EPD, 1 % PEG(1000) 2 ml, as a additive for making their surface crack-free, was used for electrophoresis. As a results, the cracks were considerably decreased and the superconducting critical current density $(J_e)$ without/with PEG was $1200A/cm^2$ and $2020A/cm^2$, which films deposited in mix iso-propanol and iso-butanol suspension.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.288-291
• /
• 2001

It is very important to select suspension solution for forming electrophoretic deposited YBCO thick film, because it is heavily affected to its superconducting properties. In this paper, high-temperature superconductor films of YBa$_2$Cu$_3$$O_{7-x}$ were fabricated by electrophoretic deposition (EPD) from alcohol-based suspension such as iso-propanol, iso-butanol, and their mixture. For the formation of YBCO dense and adherent coating on a silver wire by EPD, 1% PEG(1000) 2 $m\ell$, as a additive for making their surface crack-free, was used for electrophoresis. As a results, the cracks were considerably decreased and the superconducting critical current density (J$_{c}$) without/with PEG was 1200 A/$\textrm{cm}^2$ and 2020 A/$\textrm{cm}^2$, which films deposited in mix ism-propanol and iso-butanol suspension.ion.

• 소성∙가공
• /
• 제25권6호
• /
• pp.366-372
• /
• 2016

Recently, the amount of spring usage is on the increase in the automotive and aircraft parts industries as well as home appliances. Manufacture of spring reflects a need for diversification, mass production and high precision. Therefore it is very important to know the bending method and forming technique according to the shape of spring. In this study, to find the optimal bending method for the motor spring, the FE-simulation was executed using orthogonal array. The design parameters are wire length, length of vibration and feed rate. Then, the optimal combination of design parameters was suggested using ANN technique.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.149-158
• /
• 2004

In most RP processes, the inherent stair-stepped surfaces and shrinkage-induced warping of the parts require post processing such as surface finishing. To minimize such defects, VLH-ST, a newly developed RP process, employs a 3.9-mm thick expandable polystyrene (EPS) foam sheet and a hot wire to contour it to have slant linear-interpolated sides. The use of relatively thick sheets for layers, however, limits the process capability of constructing fine details, especially smaller than the layer thickness. This study is focused on the development of a post processing method fo fine details of VLM-ST parts. The post-processing tool was designed to meet all the requirements for the desirable post processing. It adopted a hot wire as a means of melting the EPS foam sheet. Various basic experiments on the post processing were carried out to obtain the optimal process conditions. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the experiments. The effectiveness of the developed post-processing method fo forming or engraving fine details on the VLM-ST parts has been thus demonstrated. The experiments on engraving several sets of letters, such as CANESM, 인간, and 한국과학기술원, on the EPS foam sheet were carried out. In addition, a flowery shape was engraved on a three-dimensionally curved surface of a pottery-shape VLM-ST part.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.331-337
• /
• 2011

Purpose: The purpose of this study was to impact of force system change in finger spring that add helical coil one round on orthodontic force. Methods: The following conclusions were drawn from the experiment conducted after bending 90 samples with a CNC wire forming machine while changing the height and lumen size to 1mm - 3mm - 5mm and 2mm - 3mm - 4mm respectively in the coil of the force system in finger spring added with one wheel of helical coil of 18-8 stainless steel round wire (${\Phi}0.5mm$, spring hard) from Jinsung Co. in domestic market under the following conditions: Laboratory name = Instron 5942; Temperature($deg^{\circ}C$) = 18.00; Humidity(%) = 50.00; Rate 1 = 10.00000 mm/min; Compressive extension = 5.0mm. Results: When Coil height is 1, 3, 5mm and lumen size is 2, 3, 4mm reduce finger spring as mean value of compressive extension occasion maximum load(mN) increases as coil height rises, and lumen size grows to 5.0mm. And was expose that compressive load(mN) increases as coil position of finger spring rises and increase as lumen size is decrescent. Conclusion: As the adherence height of coil was raised from 1mm through 3mm to 5mm, compressive load increased. As the lumen size increased from 2mm through 3mm to 4mm, compressive load decreased. Therefore, these results suggest that it is desirable to lower the coil height and enlarge the lumen size to enhance the biomechanical efficiency of finger spring when manufacturing the finger spring for removable orthodontic devices.

• 멤브레인
• /
• 제22권1호
• /
• pp.35-45
• /
• 2012

양극산화 알루미나(AAO)막의 나노 사이즈 미세공(세공 크기 20 nm, 10 nm 및 200 nm)을 주형으로 사용하여 전도성 고분자인 폴리피롤, 폴리아닐린 중합체 및 폴리피롤/폴리아닐린 공중합체 나노와이어를 제조하였다. 미세공 주형 내에서 전도성 고분자의 성장은 세공의 벽면을 따라 튜브 형태로서 성장하였으며, 3시간 이후에는 내부가 완전히 채워진 나노와이어가 형성되었다. AAO 막을 수산화나트륨 용액으로 퍼리하여 세공 내에 형성된 전도성 고분자 나노와이어를 회수 하였으며. 회수된 나노와이어�l 직경과 길이는 주형 막의 세공 형상과 일치하였다. 통상의 용액 중합법으로 제조된 전도성 고분자 분말과 비교하여 주형 합성법으로 제조된 전도성 고분자 나노와이어는 결정성과 열적 안정성이 향상되었으며, 전기 저항은 4~60% 감소하였다.

• Smart Structures and Systems
• /
• 제6권3호
• /
• pp.239-262
• /
• 2010

Tube Lines has carried out a "knowledge and investigation programme" on the deep tube tunnels comprising the Jubilee, Northern and Piccadilly lines, as required by the PPP contract with London Underground. Many of the tunnels have been in use for over 100 years, so this assessment was considered essential to the future safe functioning of the system. This programme has involved a number of generic investigations which guide the assessment methodology and the analysis of some 5,000 individual structures. A significant amount of investigation has been carried out, including ultrasonic thickness measurement, detection of brickwork laminations using radar, stress measurement using magnetic techniques, determination of soil parameters using CPT, pressuremeter and laboratory testing, installation of piezometers, material and tunnel segment testing, and trialling of remote photographic techniques for inspection of large tunnels and shafts. Vibrating wire, potentiometer, electro level, optical and fibre-optic monitoring has been used, and laser measurement and laser scanning has been employed to measure tunnel circularity. It is considered that there is scope for considerable improvements in non-destructive testing technology for structural assessment in particular, and some ideas are offered as a "wish-list". Assessment reports have now been produced for all assets forming Tube Lines' deep tube tunnel network. For assets which are non-compliant with London Underground standards, the risk to the operating railway has to be maintained as low as reasonably practicable (ALARP) using enhanced inspection and monitoring, or repair where required. Monitoring techniques have developed greatly during recent years and further advances will continue to support the economic whole life asset management of infrastructure networks.

• 디자인학연구
• /
• 제14권3호
• /
• pp.197-210
• /
• 2001

고대로부터 현재에 이르기까지 금속공예에서 주재료로 사용되는 물질들에는 물질 자체가 지니고 있는 상징성과 특수한 의미들이 내재되어 있다. 이러한 상징성과 의미들은 금속공예를 해석하는 기본적인 단초가 되어, 의미소가 된다. 일반적으로, 금속공예에 사용된 물질들은 진귀한 물질들로서 금과 은이 대부분이었고, 여기에 어울리는 보석들이 사용되었다. 그러나, 최근에는 그다지 귀하지 않은 유리, 철, 알루미늄 등 일상의 물질들이 여기에 더하여 사용되는 경우도 있다. 몇몇 작가들은 의도적으로 이러한 물질들을 사용하고 있으며, 그들에 의해서, 이러한 물질들만이 드러낼 수 있는 특수기법이 개발되고 있다. 이러한 기법들 중에는 재료자체의 물질이 지니고 있는 질감이나 물성들이 전혀 다른 물질처럼 보이게 하는 경우도 있다. 다시 말하자면, 원형적인 물질 언어를 교란시켜서 새로운 물질처럼 보이게 하여 표현의 가능성을 확대 하고 있다. 이러한 예로서, 준 쉬와르츠는 주로 전해주조, 박공, 에나멜 산화기법, 녹청 착색 .. 등 매우 다양한 금속공예의 방식을 적용하여 작품을 제작하는 작가이다. 그의 작품은 일반적인 금속과는 달리, 형태가 매우 추상적이며, 다양한 질감이 드러나 있으며, 규모는 조각처럼 스케일이 크고, 표면처리 방식은 대단히 회화적이다. 또한 외형은 대단히 구조적이며, 작가가 개발한 특수한 기법에 의한 터치가 드러나 있다 이러한 터치는 상징성이 짙은 추상표현주의적인 색상과 이질적으로 절충되어 있다. 나아가서, 프리미티비즘의 원생적인 분위기에서부터 중세의 장식적인 일면, 미니멀한 특성과 카오스적인 일면들까지 혼재해 있다. 작품을 구성하는 이러한 요인들은 금속의 고유의 의미와 직/간접적으로 연결되고 있으나, 특수하게 사용된 기법과 기초 물질언어가 혼재해 있어서, 그 원형적인 물질로서의 의미는 교란되어 있다. 이렇게 교란된 물질언어는 시각적인 특수 효과를 이룩하여 일루젼으로 작용한다. 그것은 금속공예의 표현법을 더욱 풍요롭고 무한하게 만드는 요인이 되어 다양한 해석을 가능하게 한다

• 대한소아치과학회지
• /
• 제26권3호
• /
• pp.459-465
• /
• 1999

소아의 구강으로부터 분리한 비수용성 글루캔 형성 억제세균의 Streptococcus mutans 치태 형성에 대한 억제 정도와 분리 세균속의 타액내 농도가 타액내 전체 세균의 농도에 미치는 영향을 본 결과 다음과 같은 결과를 얻었다. 구강으로부터 분리한 비수용성 글루캔 형성 억제세균의 효과를 비커 와이어 검사로 본 결과, 교정용 와이어상에 형성된 치태의 무게가 Streptococcus mutans 단독배양시 152mg에서 Enterococcus durans, Lactobacillus acidophilus, Streptococcus oralis와의 혼합배양시 각각 4mg, 78mg, 72mg으로 감소되었다. Streptococcus mutans의 생균수는 단독배양시 ml당 $3.6{\times}10^8$ 개에서 Enterococcus durans, Lactobacillus acidophilus, Streptococcus oralis와의 혼합배양시 각각 ml당 $1.4{\times}10^6,\;5.6{\times}10^6,\;3.8{\times}10^6$으로 감소하였다. 소아로부터 얻은 타액을 BHI agar에 접종하였을 때의 생균수는 $4.8{\times}10^6$에서 $1.3{\times}10^9$이었으나, 이러한 전체 세균의 농도는 타액내 Enterococcus, Lactobacillus, Streptococcus mutans를 억제하는 Streptococcus의 농도와 관련이 없었다. 이상의 결과를 종합하면 소아의 구강으로부터 분리한 비수용성 글루캔 형성 억제 세균의 Streptococcus mutans 치태형성에 대한 억제는 Streptococcus mutans의 증식을 억제하여 일어났으며, Enterococcus, Lactobacillus, Streptococcus mutans를 억제하는 Streptococcus의 구강내 농도는 구강 즉 타액내 전체 세균의 농도에 영향을 미치지 않았다.

• 한국재료학회지
• /
• 제15권3호
• /
• pp.177-182
• /
• 2005

Large amounts of the waste SiC sludge containing small amounts of Si and organic lubricant were produced during the wire cutting process of the single silicon crystal ingots. The waste SiC sludge was purified by the washing process and the purified SiC powders were used to fabricate continuously porous $SiC-Si_3N_4$ composites using a fibrous monolithic process, in which carbon, $6wt\%\;Y_2O_3-2\;wt\%\;A1_2O_3$ and ethylene vinyl acetate were added as a pore-forming agent, sintering additives, and binder, respectively. In the burning-out process, carbon was fully removed and continuously porous $SiC-Si_3N_4$ composites were successfully fabricated. The green bodies containing SiC, Si particles and sintering additives were nitrided at $1410^{\circ}C$ in a flowing $N_2+10\%\;H_2$ gas mixture. Continuously porous composites were combined with SiC, ${\alpha}Si_3N_4,\;\beta-Si_3N_4$ and a few $\%$ of Fe phases. The pore size of the 2nd and the 3rd passed $SiC-Si_3N_4$ composites was $260\;{\mu}m$ and $35\;{\mu}m$ in diameter, respectively.