• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.15-20
• /
• 2018

There have been a number of major fatal fire accidents in Korea recently. The number of fires in 2017 were 44,178, which is not only increasing number of fires but also increasing in casualties. Particularly, the fire at Jecheon Sports Center, which suffered many casualties, is expected to have a huge impact. The cause of the fire has not been determined yet, but heat waves on the ceiling have also been pointed out. As such, the copper heating waves, which are used as a preventive measure against damage of pipes due to freezing of pipes, etc., always have a fire hazard. To determine the possibility of a flame-resistant heated fire, a positive electric cable product was used to artificially ignite and analyze the results. In case of a short circuit, the external covering of the positive electric cable is damaged, but not short circuit unless the heating material surrounding the wire is damaged. Due to the characteristics of heating cable for preventing copper waves, the chances of insulation becoming more severe due to moisture and temperature changes are higher than normal wires. If the internal heating system is carbonized by insulating deterioration without damage to the outer coating, it is likely to cause trekking, to form a winding loop in the heating materials, and to cause short circuit in the heated materials. For the positive temperature line, if the middle is shorted, the current continues to flow to the short circuit unless the breaker disconnects. Consequently, a heated fire that does not cut off the power immediately may leave multiple marks or cuts.

• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.115-129
• /
• 2005

The purpose of this study was to identify injury characteristics happened in the college dental laboratory technique classes and to provide the empirical accident findings for safety education development for the college dental technology classes. The research data were collected from a self-administered survey distributed to the conveniently selected college students. The study participants were 476 freshmen, sophomore and junior students whose major was the dental laboratory technology of the 4 colleges in 2 metropolitan cities and 2 medium-size cities. All collected survey responses were encoded and analyzed in SPSS 12.0. The findings were as follows. The accidents happened to the college students during the dental laboratory technology classes: 1. The accident rate was the highest in the sophomore and the freshmen, junior in order. 2. The body parts frequently injured were hands, face, eyes, arms, and legs in order. 3. The frequent injury types were cut, burnt, stuck, wound, and suffocated in order. 4. The treatment methods for their accidents were the simple first-aids, no treatment, and the emergency room visits in order. 5. The laboratory training conditions inducing the accidents were significantly frequent under wire-related, and wax-related, iron-related, alcohol-related jobs in order, but not frequent in investing material-related, porcelain-related, resin-related, and agar-related jobs. Polishing was the most accident-prone job explaining 63% of the laboratory accidents and then, model producing, wax patterning, casting, burning, and investing jobs in order. In summary, the college dental laboratory accidents had the certain patterns by the training level and by the material or machine involved in each class. Thus, the planned and organized safety education programs should be produced and investigated for college students before their major laboratory classes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.297-305
• /
• 2016

This study aims to analyze characteristics of environmental load for the construction phase of PSC beam bridge based on Life Cycle Assessment. For detail computation of environmental load, the construction materials and energy consumption are derived from the BOQ, also connecting with environmental load by Korea LCI Database Information Network. The characteristic of environmental impact was analyzed by 25 cases and cut-off ratio was 80% to 94%. The result sorted by construction materials revealed that environmental load were 53.3% for ready-mixed concrete, 9.6% for wire rod, 7.8% for rebar, 6.8% for cement, 5.5% for plywood, and 5.2% for energy. Furthermore, the result of environmental impact revealed that 45.5% for global warming, 30.4% for abiotic resources depletion, 10.5% for human toxicity, and 8.9% for photochemical oxidant creation. In the future, we can make a decision considering environmental load based on LCA at design phase.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.477-481
• /
• 2012

An X-ray diffractometer which has various X-ray optics can give qualitative and quantitative information for a sample using a nondestructive analysis method. A parallel beam optic passes the parallel beam and removes divergent beam generated from an X-ray tube. The parallel beam optic used in the X-ray diffractometer was fabricated by wire cut and grading of stainless steel plates and was evaluated its performance using an X-ray imaging system. The measured parallelization of 6.6 mrad for the fabricated the parallel beam optic was a very close to the expected value of 6 mrad. An X-ray imaging technique for evaluating the parallel beam optics can estimate parallelization for each plate and can be used to other X-ray optics.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.5
• /
• pp.51-60
• /
• 2006

In order to examine the heat transfer characteristic of a soil warming system and effects of soil warming on the greenhouse heating load, control experiments were performed in two greenhouses covered with double polyethylene film. One treated the soil warming with an electric heat wire and the other treated a control. Inside and outside air temperature, soil temperature and heat flux, and heating energy consumption were measured under the set point of heating temperature of $5,\;10,\;15,\;and\;20^{\circ}C$, respectively. Soil temperatures in a soil warming treatment were observed $4.1\;to\;4.9^{\circ}C$ higher than a control. Heating energy consumptions decreased by 14.6 to 30.8% in a soil warming treatment. As the set point of heating temperature became lower, the rate of decrease in the heating energy consumptions increased. The percentage of soil heat flux in total heating load was -49.4 to 24.4% and as the set point of heating temperature became higher, the percentage increased. When the set point of heating temperature was low in a soil warming treatment, the soil heat flux load was minus value and it had an effect on reducing the heating load. Soil heat flux loads showed in proportion to the air temperature difference between the inside and outside of greenhouse but they showed big difference according to the soil warming treatment. So new model for estimation of the soil heat flux load should be introduced. Convective heat transfer coefficients were in proportion to the 1/3 power of temperature difference between the soil surface and the inside air. They were $3.41\;to\;12.42\;W/m^{2}^{\circ}C$ in their temperature difference of $0\;to\;10^{\circ}C$. Radiative heat loss from soil surface in greenhouse was about 66 to 130% of total heating load. To cut the radiation loss by the use of thermal curtains must be able to contribute for the energy saving in greenhouse.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.469-481
• /
• 1993

The purpose of this study was to achieve the reduction of the galvanic current between the dental amalgam alloy and gold alloy. In order to measure the galvanic current between these two metals a prep in the size of $4{\times}13mm$ which was filled with amalgam and another prep of $4{\times}2mm$ was filled with gold alloy was made in the acrylic resin. These two preps were then connected to a 2mm diameter copper wire. Using an ammeter to measure the galvanic current, six different kinds of amalgam and gold alloy were immersed in saline solution with approximately 10mm distance between the two alloys. Chemical agents that are thought to reduce the galvanic current such as hydrazine. silver nitrate, potassium chromate, and bonding agents such as Scotch bond 2(3M) and All bond 2(Bisco) were applied to the alloy surface. Cathodic inhibitor such as hydrazine was applied to gold alloy where as anodic inhibitor such as silver nitrate and potassium chromate were applied to amalgam. Both bonding agents, Scotch bond 2(3M) and All bond 2 (Bisco), were applied to amalgam. The following results were obtained when the currency on the coated alloy surface was compared to the uncoated surface. 1. The galvanic currency went down as the time elapsed and after 30 minutes no change was detected. 2. Initial currency was higher in low copper amalgam compared to high copper amalgam. Intitial currency was the highest in low copper lathe-cut amalgam. 3. Group of gold coated with hydrazine had the most reduction in galvanic currency. 4. Group of amalgam coated with silver nitrate or potassium chromate also showed significant reduction in galvanic currency. 5. The bonding agents also helped reduce galvanic currency. 6. Of all the agents used to reduce galvanic currency, silver nitrate showed the best result.

• Korean journal of food and cookery science
• /
• v.33 no.3
• /
• pp.292-299
• /
• 2017

Purpose: The present study explored cookie making performance using Jeju magma seawater to elucidate the effects of minerals in water on quality of baked goods. Methods: Seven water samples were analyzed for their mineral content, pH and water hardness. Starch pasting properties of flour in water samples was analyzed using RVA, and cookie making performance using water samples was evaluated with the AACCI wire-cut cookie baking method. Quality of cookies was measured by weight loss during baking, cookie geometry, color, and firmness. Results: Hardness of water samples ranged from 0-4200, and mineral content was in the order of magma seawater > 100% ED mineral water > 50% ED mineral water > 10% ED mineral water > tap water > Samdasoo > distilled water. RVA results showed that water hardness exhibited significant relationships with pasting temperature (p<0.05, R=0.863), peak viscosity (p<0.001, R=0.944), final viscosity (p<0.05, R=0.861), and setback (p<0.05, R=0.782). Cookie baking results showed that cookie diameter increased in the order of magma seawater < 100% ED mineral water < 50% ED mineral water < 10% ED mineral water $\approx$ tap water < Samdasoo < distilled water. Conclusion: As mineral content in water increased, flour pasting temperature and viscosity increased, whereas cookie diameter decreased with color fading. However, cookies formulated with 50% ED mineral water showed similar cookie geometry and texture to those with tap water. Therefore, controlling the mineral content of water can be successfully applied to produce mineral-enriched cookies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.347-352
• /
• 2010

Under harsh environments in which remote control is impossible, wire-guided control technology is effective for controlling distant underwater vehicles that serve mother ships in missions, such as exploration and installation. When the fiber is unwound from the spool, tension fluctuations occur in the fiber because of the relative velocity of the moving vehicles and unwinding velocity of the fiber. As a result, fiber cables exhibit complicated behaviors, become entangled, and may get cut. In this study, a spool-like design for winding tens of kilometers of fiber cables is proposed by analyzing cable winding. The unwinding performance of the designed spool is estimated by performing nonlinear dynamics analysis of the nonlinear behavior and tension fluctuations observed during the unwinding of the fiber.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.902-905
• /
• 2008

With development of internet, location-based service (LBS) is getting more interest in wire and wireless network, and many studies are in progress to provide various services such as GIS and GPS technique related to this. Today positioning and information providing service is accomplished by mobile communication companies' chasing the cell or building unique GIS system, but there is a lot of building-cost that must be endured to define boundary of collecting precise location information from chasing Cell and provide unique location information service. In this paper, it desires to make the database of location information with using GPS, relatively precise satellite positioning system, to cut the cost of building location information service, and to present service models such as children's positioning service that is to reduce the cost of building GIS by using Web Open API and provide location information of discrete object in real-time.

• Asian Journal of Turfgrass Science
• /
• v.7 no.1
• /
• pp.19-30
• /
• 1993

Experiments were conducted to investigate propagation, shade tolerance, cold resistance and growth rate of evergreen ground cover plants ; Vinca minor K , Ajuga reptans L., Ophiopogon japonicus ker. f nanus hort , and Hedera helix.. The results were as follows : 1.It is convenient to use the growing case for rice seed to grow and transplant Vinca minor seed-ling. The most proper density of transplanting Vinea was 180 plants per 1m$^2$. At the end of growing season, the coverage came up to 90% The rooting ability of Hedera helix was best to cut from April to May (temperature 15~23˚C). The seedling length of Parthenocissus quinguefohlia were irregular and ranged from 5 cm of 200cm. 2. Ajuga reptans L., Ophiopogon j. and Vinca minor L. grew better under 50% light intensity than full sunlight. Particularly, under full sunlight and aestival high temperature, there were a few withering plants in Ajuga reptans L. , and V Vilica minor L. 3. Of Vinca minor K., Ajuga reptans L. , Ophiopogon japonicus ker. f. nanus hort. and Hedera helix. acclimatized in open field, where temperature was from -7~8˚C. There were few plants had damage in low temperature incubator to -16˚C after field acclimatization. 4.Tendrils of Parthenocissus quinguefolia strongly clung to the wire netting stone fence but intruded into the gap and cranny of the precast concrete fence and so clung to, so that it needed to install the bending net on the precast concrete fence.