감마지표 분석을 통한 호흡연동방사선치료의 정량적 평가 (Quantitative Evaluation of Gated Radiation Therapy Using Gamma Index Analysis)
-
- 한국의학물리학회지:의학물리
- /
- 제24권3호
- /
- pp.198-203
- /
- 2013
일반적으로 호흡연동방사선치료(gated radiation therapy)의 평가를 위해 호흡에 의한 장기의 움직임을 모사하는 움직이는 팬텀(moving phantom)을 사용한다. 표적(target)은 모든 방향으로 움직이기 때문에 모든 방향의 움직임을 고려하여야 한다. 본 연구에서는 감마지표(gamma index) 분석을 통한 호흡연동방사선치료의 평가방법을 제시하고 움직임영역(motion range)에 따른 적절한 연동창(gating window)의 크기를 알아보고자 한다. 두미축(craniocaudal) 방향으로 움직임을 모사하는 팬텀을 제작하였다. 이 팬텀은 움직이는 받침대(moving platform), 2차원 이온전리함배열(I'm MatriXX, IBA Dosimetry, Germany), 및 고체물팬텀(solid water phantom)으로 이루어졌다. 6 MV 에너지의 광자선을
The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.
목적 : 고 에너지 광자선에 대한 기준점에서의 물 흡수선량 계산을 절차상 또는 계산상의 오류를 피하기 위해 공기커마(혹은 조사선량) 교정정수에 토대를 두고 있는 IAEA TRS-277과 AAPM TG-21 및 최근 발표된 새로운 개념의 물 흡수선량 교정정수에 토대를 두고 있는 IAEA TRS-398과 AAPM TG-51 표준측정법에 기초한 고 에너지 광자선의 선량 교정 프로그램을 개발하고자 한다. 대상 및 방법 : 현재 국내외에서 널리 사용되고 있는 고 에너지 광자선에 대한 흡수선량 표준측정법은 IAEA TRS-277과 AAPM TG-21로서 공기커마(혹은 조사선량) 교정정수에 토대를 두고 있어 수식 체계가 복잡하고, 사용된 물리량에 대한 불확정도가 커서 선량측정의 정확성을 향상시키는데 한계가 있다. 최근 국제원자력기구와 미국의학물리학회에서는 새로운 개념의 물 흡수선량 교정정수에 토대를 두고 있는 IAEA TRS-398과 AAPM TG-51을 발표하였다. 개발된 네 종류의 선량 교정 프로그램은 이들 표준측정법에서 사용되고 있는 수식체계와 물리적인 매개변수를 엄격하게 적용하였고, 선량계에 대한 정보 및 물리적인 값에 대한 표와 그래프 값은 수치화하여 데이터베이스화하였다. 이들 프로그램은 윈도우 환경에서 사용이 용이하도록 비쥬얼
목적 : 이 연구의 목적은 SPECT 영상의 감쇠와 산란 현상을 보정하고 실제 임상 환경에서 상용하는 영상과 비교하여 그 효과를 평가하는 것이다. 그리고, 정확도가 개선된 영상에서 방사능양을 도출하여 SPECT 영상의 절대적인 정량화를 검증하는 것이다. 대상 및 방법: 직경이 20.0 cm인 원통형 팬톰에 삽입물로써 체적 25 ml의 폴리에틸렌 병을 6개 배치하고 배후와 다양한 비율을 이루도록 Tc-99m을 주입하였다. SPECT 기기로는 Trionix Triad xlt 20을 사용하였고 광피크 윈도
목적: 본 연구는 제주지역에 거주하는 암환자의 요구도와 만족도를 파악하기 위한 조사연구이다. 방법: 2009년 7월 13일부터 7월 30일까지 제주대학교 병원에 내원한 암환자 174명의 의료서비스에 대한 요구도와 만족도를 분석하였다. 보건복지부에서 재가암환자 관리사업 시행 시 제시한 서비스 요구도 및 충족도 조사 항목을 이용하여 조사하였으며, 수집된 자료는 SPSS 12.0 for Windows program을 이용하여 분석하였다. 결과: 대상자는 위암과 대장직장암 등 위장관계 암환자가 33.3%로 가장 많았으며, 52.3%가 진단 후 경과 기간이 1년 이하였으며, 진단 후 5년 이상 경과한 대상자는 5.2%로, 최장기간은 12년이었다. 전체의 60.9%가 암으로 인한 수술 경험이 있었으며, 28.2%가 항암화학요법 경험이 있었다. 요구도가 가장 높았던 항목은 경제적지원(3.38점)이었으며, 치료 계획에 대한 상담(3.22점), 질병에 대한 정보(3.07점), 암 이외의 다른 질병 관리(2.97점) 순이었다. 만족도가 가장 높았던 항목은 종교상담(3.41점)이었으며, 간병보조(3.39점), 직업상담(3.26점), 가족 및 대인관계 상담(3.26점), 물리치료 및 재활치료(3.20점), 보험 상담(3.18점) 순이었으며, 만족도가 가장 낮은 항목은 경제적 지원(1.98점)이었다. 남성의 서비스 만족도는 3.1점으로 여성(2.8점)보다 높았으며, 자녀와 사는 경우 서비스 요구도가 가장 높았으며, 홀로 살거나 자녀와 사는 경우 서비스 만족도가 가장 낮았다. 의료보호 환자 및 암보험에 가입하지 않은 경우 서비스 요구도가 더 높은 것으로 나타났다. 대상자의 연령, 직업, 학력수준, 결혼여부, 종교, 수입에 따른 차이는 없었으나, 60대 및 수입이 높은 그룹에서 서비스 만족도는 가장 높고, 요구도는 가장 낮은 것으로 나타났다. 의학적 진단 및 치료 방법에 따른 서비스 요구도 및 만족도의 차이는 없었으나, 갑상샘암 환자에서 서비스 만족도가 다소 낮았으며, 방사선 치료 및 색전술을 받은 경우 만족도가 다소 낮은 것으로 나타났다. 결론: 암환자들은 경제적 지원 및 치료계획이나 질병에 대한 정보를 얻고자 하는 요구도가 높으며, 실제 경험하는 증상에 대한 관리는 잘 이루어지지 않는 것으로 보인다. 또한, 환자의 지지체계 및 경제적 지원 체계의 확보 여부에 따라 의료서비스에 대한 요구도도 다양하고, 주요 5대암 이외의 암환자에 대한 지원이 다소 부족한 것으로 보인다. 따라서, 의료기관에 내원 중인 암환자 및 재가암환자 모두를 대상으로, 대상자 특성 및 요구도를 고려한 지속적인 정책적 노력이 필요할 것이다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
창덕궁 후원의 부용정(芙蓉亭)은 독특한 평면형태, 공간구성, 건물의 장식 등이 뛰어난 비례와 대비를 이루고 있는 점을 인정받아 2012년 3월 2일에 보물 제1763호로 지정되었다. 그러나 지정사유가 형이하학적으로 평가되었고, 그마저도 왜 지금과 같이 독특한 형태로 조영되었는지 명확하게 규명하지 못하였다. 따라서 본 연구에서는 역사적 배경을 바탕으로 자연철학 및 사상에 관한 형이상학적 접근을 시도하였고, 조영의도와 공간구조의 특징을 규명하여 부용정의 정체성을 찾는데 주력하였다. 요약된 결과는 아래와 같다. 첫째, 부용정의 조영배경 및 특징: 정조는 즉위와 함께 창덕궁 후원에 규장각(奎章閣)을 창설하고 개혁정치의 일환으로 초계문신(抄啓文臣)을 양성하였다. 또한 각신(閣臣)들을 가인(家人)처럼 우대해주며 친정체계를 구축하였다. 정조의 적극적인 개혁정치는 신하들에게 후원을 구경시켜주기는 계기가 되었으며, 정조 16년(1792)에 각신을 중심으로 한 내각상조회(內閣賞釣會)를 공식적으로 발족하고 후원유람을 정례화하게 되었다. 후원유람은 꽃을 보고 낚시를 하는 상화조어연(賞花釣魚宴), 난정수계의 활동 등으로 이루어졌고, 이후 국가의 대신들이 참석하게 되면서 큰 행사로 발전하게 되었다. 정조는 대신, 중신, 각신들과 이러한 문화 활동을 함께하고 나아가 자신의 왕도정치를 실현할 장소로써 부용정을 조영한 것이었다. 둘째, 부용정의 입지와 공간적 특성: 정조는 즉위(1776)와 함께 택수재를 새롭게 개축하였다. 무엇보다 개유와-택수재-원도-어수문-규장각을 축선에 맞춰 연계한 점은 자신의 정치적 이상을 실현하기 위해 현재의 규장각 일원을 계획-설계한 것으로 판단할 수 있다. 정조 17년(1793)에는 기존의 사우정(四隅亭) 형태였던 택수재를 군신(君臣)이 함께할 수 있는 공간으로 조성하기 위해 위계를 두어 증축하고 부용정이라 칭하였다. 지당 위에 위치한 부용정의 북쪽공간은 임금의 공간으로 다른 곳보다 한 단 높게 조성하였고 창호도아자살로 차별화한 특징을 보인다. 서쪽과 동쪽은 신하들의 공간이다. 중앙공간은 양측의 신하들이 북쪽공간에 입어한 임금을 배알하기 위해 마련된 공간이며, 서쪽과 동쪽의 신하들은 부용정의 귀퉁이 공간을 돌아 남쪽공간에서 중앙공간으로 입실하게 되는 구조로 조영되었다. 결국 부용정은 최소한의 공간으로 편전(便殿)의 기능까지 수행할 수 있도록 설계된 정원건축물인 것이다. 셋째, 부용정의 문화적 가치: 부용정 일원은 세조, 인조, 현종, 숙종, 정조 등 왕들의 사유적인 정원문화가 복합적으로 존재하며 꾸준히 발전된 특징을 보인다. 특히 정조는 선왕들이 조성해놓은 다양한 물리적, 사회적, 상상적 환경 등을 계승하였고 더불어 자신의 왕도정치를 위해 신하들을 후원에 불러들였으며 그 중추적 장소로 부용정을 완성한 것이다. 곧 부용정은 조선왕조의 영속성이 반영된 정원건축물로 그 가치를 높게 평가할 수 있으며, 공간적으로도 유교사상이 정자에 반영되어 위계가 구분된 독특한 사례로써 왕의 정원에서만 나타나는 특수성을 잘 보여주고 있다.
목적 : 비인강암 환자의 국소제어율을 향상시키기 위한 목적으로 보상 여과판을 이용한 전방위 강도변조 방사선치료방법(intensity modulated radiation therapy : IMRT)을 계획하고 기존 3차원 입체조형치료방법과 비교하여 최적의 방사선치료방법을 모색하고자 한다. 대상 및 방법 : 3-차원 입체조형치료계획으로 치료받았던 비강암환자(T4N0M0) 1예를 선택하여 치료면의 굴곡과 뼈, 공동 등 불균질 조직으로 인하여 발생되는 표적체적의 선량분포를 균일하게 만들고 주변 정상장기의 손상을 최소화하기 위한 일차 입사선량의 강도 조절을 보상여과판으로 시행 하였다. 환자는 열변성 plastic mask로 고정시킨 후 치료조준용 CT Scan (PQ5000)을 이용하여 3 mm 간격으로 scan 하고 가상조준장치(virtual simulator)와 3차원 방사선치료계획 컴퓨터
본 연구에서는 집중형 센터를 가진 역물류네트워크(Reverse logistics network with centralized centers : RLNCC)를 효율적을 해결하기 위한 혼합형 유전알고리즘(Hybrid genetic algorithm : HGA) 접근법을 제안한다. 제안된 HGA에서는 유전알고리즘(Genetic algorithm : GA)이 주요한 알고리즘으로 사용되며, GA 실행을 위해 0 혹은 1의 값을 가질 수 있는 새로운 비트스트링 표현구조(Bit-string representation scheme), Gen and Chang(1997)이 제안한 확장샘플링공간에서의 우수해 선택전략(Elitist strategy in enlarged sampling space) 2점 교차변이 연산자(Two-point crossover operator), 랜덤 돌연변이 연산자(Random mutation operator)가 사용된다. 또한 HGA에서는 혼합형 개념 적용을 위해 Michalewicz(1994)가 제안한 반복적언덕오르기법(Iterative hill climbing method : IHCM)이 사용된다. IHCM은 지역적 탐색기법(Local search technique) 중의 하나로서 GA탐색과정에 의해 수렴된 탐색공간에 대해 정밀하게 탐색을 실시한다. RLNCC는 역물류 네트워크에서 수집센터(Collection center), 재제조센터(Remanufacturing center), 재분배센터(Redistribution center), 2차 시장(Secondary market)으로 구성되며, 이들 각 센터 및 2차 시장들 중에서 하나의 센터 및 2차 시장만 개설되는 형태를 가지고 있다. 이러한 형태의 RLNCC는 혼합정수계획법(Mixed integer programming : MIP)모델로 표현되며, MIP 모델은 수송비용, 고정비용, 제품처리비용의 총합을 최소화하는 목적함수를 가지고 있다. 수송비용은 각 센터와 2차 시장 간에 제품수송에서 발생하는 비용을 의미하며, 고정비용은 각 센터 및 2차 시장의 개설여부에 따라 결정된다. 예를 들어 만일 세 개의 수집센터(수집센터 1, 2, 3의 개설비용이 각각 10.5, 12.1, 8.9)가 고려되고, 이 중에서 수집센터 1이 개설되고, 나머지 수집센터 2, 3은 개설되지 않을 경우, 전체고정비용은 10.5가 된다. 제품처리비용은 고객으로부터 회수된 제품을 각 센터 및 2차 시장에서 처리할 경우에 발생되는 비용을 의미한다. 수치실험에서는 본 연구에서 제안된 HGA접근법과 Yun(2013)의 연구에서 제안한 GA접근법이 다양한 수행도 평가 척도에 의해 서로 비교, 분석된다. Yun(2013)이 제안한 GA는 HGA에서 사용되는 IHCM과 같은 지역적탐색기법을 가지지 않는 접근법이다. 이들 두 접근법에서 동일한 조건의 실험을 위해 총세대수 : 10,000, 집단의 크기 : 20, 교차변이 확률 : 0.5, 돌연변이 확률 : 0.1, IHCM을 위한 탐색범위 : 2.0이 사용되며, 탐색의 랜덤성을 제거하기 위해 총 20번의 반복실행이 이루어 졌다. 사례로 제시된 두 가지 형태의 RLNCC에 대해 GA와 HGA가 각각 실행되었으며, 그 실험결과는 본 연구에서 제안된 HGA가 기존의 접근법인 GA보다 더 우수하다는 것이 증명되었다. 다만 본 연구에서는 비교적 규모가 작은 RLNCC만을 고려하였기에 추후 연구에서는 보다 규모가 큰 RLNCC에 대해 비교분석이 이루어 져야 할 것이다.