• Korean Journal of Agricultural Science
• /
• v.39 no.2
• /
• pp.271-277
• /
• 2012

Dimensions, operation conditions and improvement items for round roof windows were investigated in arch shape single-span plastic greenhouse with roof vents, and natural ventilation performance was analyzed based on the ventilation theory. Diameter of round roof windows was mostly 60 cm, and chimney height projected on roof was average 30 cm. Installation space was mostly 5 to 6 m but farmhouse of 10 m and over was 16.7% also. A round roof window which has 60 cm diameter was installed to 6 m space generally and 80 cm diameter was installed to 10 m space, but correct standards did not exist. There were a lot of opinions that ventilation effect of round roof windows is fairly good and user satisfaction is generally excellent. It is problem that there is few effects in summer and that vinyl around each vent tears well and rainwater leaks, and improvement hope item required development of automatic control system. In the wind speed of 0.3 m/s, it was estimated that natural ventilation rates were 0.69, 0.55, 0.50 and 0.48 volumes per minute in case of 2, 4, 6 and 8 m installation space for round roof windows, respectively. It was analyzed that the ratio of ventilation due to buoyancy out of total ventilation were 65.2, 41.9, 29.9 and 22.8% in case of 2, 4, 6 and 8m installation space, respectively. By the round roof windows installed at space of 6 m, ventilation rate was estimated to 0.5 volumes per minute, and we can expect the increase in ventilation rate of 30%. In order to meet the recommended ventilation rate for summer season, we have to install the round roof windows at space of 1 to 2 m. However, it is difficult to apply those installation space because of falling productivity due to lower light transmittance as well as rising costs. It is estimated that the installation space of 6m is appropriate for spring or fall season. Therefore it is necessary to encourage installing the roof windows in single-span plastic greenhouses.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.114-120
• /
• 2012

There are lots of buildings which were built before the Legislation on building energy rating system. Remodeling of the buildings would be required for an improvement of the building energy rating system was enforced by the government. In the Passive Building Design, Elements which will be used for the remodeling are Insulation, Window, External venetian blind, Heat exchanger. The Purpose of this study is to indicate a Method for the improvement of Energy saving by an analysis of Construction Cost, Cost Evaluation, Energy performance Efficiency in applied design elements. In this study, the remodeling of existing public buildings to improve energy efficiency rating was applied to extract the elements of design-specific energy performance, efficiency, and the application of the designs that has been analyzed. The results were as follows: applying the design-specific cost-effective investment that represents the economy (investment efficiency/%) surveyed the average insulation(7.0%), triple glazed windows(10.1%), double glazed windows(12.1%), external shading(24.5%), and Heat(77.2%) were analyzed in order to be more efficient. Analysis of the basis of information on the existing public buildings to improve energy efficiency rating for the remodeling depending on driving conditions at a degree of individual difference. The main effect, however, depending on economic investment, design elements, heat exchangers, external awning, double glazed windows, triple glazed windows, insulation, is recommended as review of the order shall be determined.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.26-34
• /
• 2008

The purpose of this study is to analyze daylight distribution and characteristics of light on the Korean traditional paper and to investigate a possibility as the shading systems. First of all, daylight distribution through the Korean traditional paper windows and doors of the Traditional House is analyzed at Genjaegotaek of the Asan Oeam Traditional Village. After making a model, the characteristics of light on the Korean traditional paper and Roller Shade fabric are analyzed Korean traditional paper has a good efficiency to diffuse the light and is less glare than Roller Shade fabric. In the present office buildings and apartmant houses, daylight characteristics of the Korean traditional paper windows and doors could be used as preliminary data to develop a window system which makes greatest performance of daylight.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.569-581
• /
• 2008

In this paper, methods are proposed for creating a curved line in a navigation mesh, which is used in a windows based virtual reality or games. The main geographies used in a windows based virtual reality or games are created by using either grids or navigation meshes. When using grids, it is difficult to create a natural geography. Multiple grids are needed to ensure precise descriptions, which can result in system overload. A navigation mesh was developed to address this issue since the navigation mesh has the benefit of placing fewer loads on the system than a grid method. The drawback, however, is that the movements of character in navigation mesh are less natural. In this paper, a method for creating a curved line using round curves is proposed in order to resolve this issue. Using the methods for creating a curved line proposed in this paper in a windows based virtual reality or games will eliminate the unnatural or awkward movement of characters that arises in the use of a navigation mesh.

• The Journal of the Korea Contents Association
• /
• v.12 no.6
• /
• pp.68-77
• /
• 2012

As the system development environment moves from single core to multi core-based platforms, it becomes more important to maintain compatibility between single core-based implementations and multi core-based implementations. Moreover, it is very important to support real-time on multi core platforms especially in cases of embedded software or test equipments which need real-time as well as correctness. Since Windows operating system dopes not support real-time in itself, it has been supporting real-time using expensive third-party solutions such as RTX or INtime. So as to reduce this kind of development expenses, in this paper, we propose RTiK-MP(Real-Time implant Kernel-Multi Processor) which supports real-time on Windows using the Local APIC of x86 architectures, and evaluate the performance of the proposed RTiK-MP after deploying it on portable missile test equipments.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.33-41
• /
• 2017

Hanok in Bukchon was originally planned for residential buildings, but recently, there have been needs and wants to renovate and modernize the houses into some other purposes. Many researches exist with regard to hanok in Bukchon; yet, most previous studies focus on the spatial changes caused by the renovation of hanok. Only few studies have dealt with some component issues such as window. Nevertheless, window of hanok is an important aesthetic and functional element that determines unique characteristics of hanok. In the process of recent modernization and functional changes of hanok, its traditional design is also changing. In fact, Bukchon has been rapidly evolving for tourist attractions so that banok has been renovated in various commercial as well as cultural purposes. Many of residential hanok have been converted into other purposes such as cultural, commercial or non-residential facilities so that the role of windows should be changed accordingly. Analyzing windows of the renovated hanok in Bukchon, this study identifies changes in its types in accordance with the repurposing. It deals with windows of the non-residential hanok only. A total of 456 Bukchon hanok are included in the Bukchon Historical and Cultural Center in the Hanok Register of the Hanok Registration System, which was enforced in 2001. Although 381 out of 456 hanok have been repaired since 2001, only 68 non-resident Bukchon hanok of the repaired ones are selected and surveyed in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.51-62
• /
• 1998

In this paper, a CAD/CAM system for 5-axis machining of model propeller is introduced. This system has been developed under the environment of personal computer and Windows NT. In order to enhance the productivity, existing text-based design S/W was integrated into this graphic-based system. Non-Uniform Rational B-Spline method is used to represent the sculptured surface of propeller blades and hub using point data, and surface blending between blade and hub is realized in this system. For 5-axis machining of sculptured surface, tool/work collision and interference are checked and inverse kinematic analysis is performed to make NC data. In addition, tool and workpiece are animated on the PC monitor by preparing NC verification module. Finally, optimal cutting conditions are determined empirically and those cutting conditions are integrated into this S/W so that the whole process from design to machining can be done automatically.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.632-639
• /
• 2014

In this paper, we propose a PC's self-monitoring system for protecting illegal outflow of important personal files, which are managed in the Windows environment PC. This paper is based on the idea that it should be a read (access) file operation in order to outflow files through the network. To compare the information (name, some content) obtained from all operations of the reading of the 'Windows File System Driver' and captured transmission packets of mini port of 'Windows NDIS (Network Driver Interface Specification) Driver', and, if two pieces of information match, this system will determine the transmission to user. In this paper, tentatively, we developed a function to gather file information about file read operation and developed a function for transmission packet capture. This demonstration implementation showed that the proposed process has validity and the proposed process verified that it does not significantly affect the PC's performance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.4
• /
• pp.159-166
• /
• 2018

The Korean fenestration energy consumption efficiency rating system only considers thermal performance of the heat transfer coefficient (U-value) and airtightness excluding optical characteristics of the solar heat gain coefficient (SHGC). This study analyzed annual heating and cooling energy requirements on the middle floor of apartment by optical and thermal performance of windows to evaluate the suitability of the rating system. One hundred and twenty-eight windows were analyzed using THERM and WINDOW 7.4, and energy simulation for a reference model of an apartment house facing south was performed using TRNSYS 17. The results showed that window performance was the main factor in the heating and cooling load. The heating load of the reference model was 539 kWh to 2,022 kW, and the cooling load was 376 kWh to 1,443 kWh. The coefficient of determination ($R^2$) of the heating and cooling loads driven from the SHGC were 0.7437 and 0.9869, which are more compatible than those from the U-value, 0.0558 and 0.4781. Therefore, it is not reasonable to evaluate the energy performance of windows using only the U-value, and the Korean fenestration energy consumption efficiency rating system requires a new evaluation standard, including SHGC.

• Journal of The Korean Association of Information Education
• /
• v.3 no.1
• /
• pp.22-32
• /
• 1999

In this paper, a von system which is based on current computer technologies is implemented. This von system organizes many personal computers in a local network into a configuration server, storage servers, and clients. To provide reliability, the data is stored using software RAID technology. Also, multimedia services are client-based for efficiency. The software components of this von system are the von configuration software, the von configuration service software, the von management software, and the von service software. Only the von service software runs in the client, while all the others run in the configuration server. The operating system on which the configuration server is run is the Windows NT such that the software executes like the UNIX-daemon process in the Windows NT service manager.