• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1C
• /
• pp.59-66
• /
• 2007

This paper proposes a windowing method to reduce noise effect and bit synchronization error caused by tolerance of a tag-response signal for ISO/IEC 18000-6 type-B readers. A tag response signal has very weak power because of a back-scattering modulation scheme and thus may be sensitive to noise. In addition, bit tolerance admitted in a tag response signal requires robust timing synchronization because it affects readers' detection performance. To reduce the two undesirable effects in a tag signal, we acquire bit transition position by using variable windows from over-sampled data, and average whole data in one bit duration. With a hardware system adopting the proposed method, we tested and verified its performance.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.924-931
• /
• 1999

Most conventional protection relays are based on processing information in the spectrum that is close to or at power frequency. It is, however, widely known that faults on transmission lines produce frequency components of a wide range. High frequency signals caused by sudden changes in system voltage that occurs in the immediate post-fault period are generally outside the bandwidth of receptibility of most protection scheme. In this respect, a specially designed stack tuner is connected to the coupling capacitor of CVT, in order to capture the high frequency signals. Digital signal processing is then applied to the captured information to determine whether the fault is inside or outside the protected zone, and to discriminate the fault type. In this paper, modal transform is not applied to fault generated signals, because signals which are converted by modal transform are not have an information of each phase any longer. Instead, using peak voltage value of data windows is able to discriminate fault type. The paper concludes by presenting fault detection and discrimination of various faults on transmission line which are based on extensive simulation studies carried out on a typical 154kV Korean transmission line, using the EMTP software.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.265-270
• /
• 2018

This study was to measure the exposure of diesel vehicle drivers to elemental carbon (EC) as an indicator of diesel particulate matter (DPM) emitted from diesel vehicles in an underground coal mine over 3 years as per NIOSH Method 5040. Our study results (range $10{\mu}g/m^3-377{\mu}g/m^3$ for the loader drivers, $19{\mu}g/m^3-162{\mu}g/m^3$ for the SMV drivers) were similar or less than previous study results (range $5{\mu}g/m^3-2,200{\mu}g/m^3$) for normal mine operations. From this study results, it appeared that the exposures decreased in the second and the third year. It is thought that the reasons for the decreased personal DPM (EC) exposures over the 3 years were related to the following recommendations; more frequent monitoring and maintenance of the diesel vehicles and their DPM filtration systems, more consistent monitoring of the mine's ventilation system and changes of work practices such as minimizing the opening of diesel vehicle windows. An educational program on adverse health effects of exposure to DPM and use of respiratory protection (P2 respirators) also assisted in minimizing driver exposure to DPM.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.194-201
• /
• 2009

The purpose of this study is to develop basic data for the efficient space plan of the Department Store focusing on users by survey of preference to methods of plan considering the functional phase, the economical phase and the adaptable phase. The results are as follows : First, we could know that users had the low degree of satisfaction to the adaptable phase of space plan for Supporting Facilities in department stores at the present time. Second, we must have the appropriate space size by using structure, doors and windows for user's satisfaction. This is the method of plan considering the functional phase for Supporting Facilities. And we could think that the methods of using the center flow plan and the arrangement of two or three facing are good for user's satisfaction. Third, it will be efficient plan if we find methods to be cleaned the structure easily and to be changed and repaired the system furniture easily for management. that methods are to be considered the economical phase for Supporting Facilities. Forth, methods of plan considering the adaptable phase are to change the size of space by using the movable type furniture and the form of space by changing structure.

• IE interfaces
• /
• v.11 no.2
• /
• pp.65-78
• /
• 1998

The letters of the automobile tire are usually engraved on the side-wall. The shape of the side-wall is a sculptured surface generated by the rotational sweeping of a profile curve. The letters laid on the side-wall are usually designed by a 2-dimensional CAD. It is impossible to machine the letters on the surface accurately by 3-axis NC machining, because the axis of cutter should be tilted to align with the normal vector of the surface. In this case. the degree of freedom for the machine is at least four. This paper describes an idea for tool path generation of a 4-axis machine by using the 2-dimensional CAD data of the letters and the surface of the side-wall. This study includes the following procedures; (1) measuring the profile of the side-wall surface and curve-fitting of the measured points. (2) the 'non-parallel projection' of the letters on the side-wall, and (3) an inverse kinematics of the 4-axis lettering machine. Procedures in this paper are programmed in C-language on Windows95 environment. With a PC based CNC controller and a 4-axis lettering machine. these are tested sucessfully for the practical use.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.2
• /
• pp.157-167
• /
• 1999

편리한 사용 방법과 멀티미디어 데이터 서비스를 지원하는 웹은 현 인터넷 환경에서 이종 컴퓨터간의 주요한 정보 전달 수단으로 자리잡았다. 그러나 웹이 사용하고 있는 통신 프로토콜 스택만으로는 부상하고 있는 정보 형태인 실시간 멀티미디어 데이터의 서비스를 적절히 지원할수 없었다. 이에 본 논문에서는 실시간 전송 프로토콜인 RTP/RTCP를 웹 통신 프로토콜 스택에 추가하여 실시간 멀티미디어 세션의 서비스를 지원할수 잇도록 그 기능이 확장된 웹 시스템의 구현을 소개한다. 이는 MBone을 통해 실시간으로 멀티캐스트되고 있는 멀티캐스트 되고 있는 멀티미디어 세션의 서비스를 웹에서 지원할수 있도록 한 것으로, 기존의 MBone응용들을 수용한 형태를 가진다. 이를 위하여, MBone상에서 개설된 세션 정보를 수집하여 이를 관리하고 그 정보들을 웹 문서로 제공하는 프로그램인 '웹 SDR'과 MBone을 통해 멀티캐스트되는 실시간 멀티미디어 세션을 웹상에서 시청할수 있도록 웹 브라우저의 기능을 확장한 Windows 95 플랫폼 기반의 '실시간 멀티미디어 웹 플러그인'을 구현하였다 그리고 , 본 연구에서 개발한 수신 위주의 웹 시스템의 서비스 품질을 개선하기 위하여 현 인터넷 환경을 고려한 서비스 품질 제어 기법인 '관측 기반의 수신단 QoS 제어 알고리즘'을 제안하고, 이를 적용하여 실시간세션 서비스 품질이 개선됨을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4191-4203
• /
• 2015

WebView is a vital component in smartphone platforms like Android, Windows and iOS that enables smartphone applications (apps) to embed a simple yet powerful web browser inside them. WebView not only provides the same functionalities as web browser, it, more importantly, enables a rich interaction between apps and webpages loaded inside the WebView. However, the design and the features of WebView lays path to tamper the sandbox protection mechanism implemented by browsers. As a consequence, malicious attacks can be launched either against the apps or by the apps through the exploitation of WebView APIs. This paper presents a critical attack called Supplementary Event-Listener Injection (SEI) attack which adds auxiliary event listeners, for executing malicious activities, on the HTML elements in the webpage loaded by the WebView via JavaScript Injection. This paper also proposes an automated static analysis system for analyzing WebView embedded apps to classify the kind of vulnerability possessed by them and a solution for the mitigation of the attack.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04a
• /
• pp.527-530
• /
• 2001

현재 인터넷의 killer application으로 VoIP 서비스를 들고 있으며 ITU-T H.323 기반의 VoIP 시스템은 검증된 기술로 인정받고 있다. 그럼에도 불구하고 대부분의 VoIP 관련기구에서는 차세대 VoIP용 호설정 프로토콜로서 IETF의 SIP를 채택하고 있다. 본 논문에서는 개발한 SIP 기반의 PC-to-PC 인터넷 전화 시스템에 대하여 기술한다. 구현 구성요소는 클라이언트와 서버로 구분된다. 클라이언트인 SIP UA(User Agent)는 MS Windows 98/2000에서 동작하며 Visual C++를 이용하여 구현하였다. 서버는 SIP Redirect Server와 사용자 등록을 위한 SIP Registrar를 Linux 환경에서 C++를 이용하여 구현하였다. SIP Registrar는 DB와 연동이 되며 MySQL 서버를 이용하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.7
• /
• pp.409-416
• /
• 2009

On 21st century, global warming is the most serious environmental problem threatening the existence of lives on the earth. One of the serious reasons of this nature phenomena was due to the greenhouse effect by carbon dioxide mainly produced with the combustion process of hydro-carbon fuel. and it is mostly produced. In the high oil prices age, intensification of energy efficiency promotion in the building sector is required. Windows are dominating large percentage whole building loads, and are regarding as the primary target of energy efficiency. The purpose of this research is on the obtaining of the renewable energy source in the skyscrape buildings in the metropolitan area. The air movement is happens due to the atmospheric pressure differences in the air. Due to this simple physical theory, it is easily expected to obtain the useful renewable nature energy through the high -raised vertical air stack installed in a tall building. However, there is one problem that should be resolved which is called air-hole effect in the sky -scrape buildings.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.369-374
• /
• 2006

Quantification of infiltration rate is an important issue in HVAC system design. The infiltration in buildings depends on many uncertain parameters that vary with significant magnitude and hence, the results from standard deterministic simulation approach can be unreliable. The authors utilize uncertainty analysis In predicting the airflow rates. The paper presents relevant uncertain parameters such as meteorological data, building parameters (leakage areas of windows, doors, etc.), etc. Uncertainties of the aforementioned parameters are quantified based on available data from literature. Then, the Latin Hypercube Sampling (LHS) method was used for the uncertainty propagation. The LHS is one of the Monte Carlo simulation techniques that is suited for our needs. The CONTAMW was chosen to simulate infiltration phenomena in a residential apartment that is typical of residential buildings in Korea. It will be shown that the uncertainty propagating through this process is not negligible and may significantly influence the prediction of the airflow rates.