• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.141-147
• /
• 2018

본 연구에서는 TS 내진보강공법의 내진보강 효과를 검증 할 목적으로 TS 댐퍼(Tension Spring-Damper)를 설치한 철근콘크리트 골조를 대상으로 한 반복 주기하중 재하 실험을 수행 하였다. 실험체는 기준 실험체인 무보강 골조 실험체와 3개의 보강 골조 실험체의 총 4개이며, 실험의 변수는 댐퍼 설치 여부, 댐퍼의 형상 및 시공방법이다. 그 결과 창호 내부 삽입 형식의 시공방법이 강도와 강성의 측면에서 2배가량, 외부 부착형식의 시공 방법이 에너지 소산의 측면에서 2배가량의 성능 향상을 나타내어 TS 내진보강공법이 현장 적용성과 내진보강 효과가 우수한 공법임을 확인 할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.109-109
• /
• 2010

$Er^{3+}$ ion shows a stable and efficient luminescence at 1.54mm due to its $^4I_{13/2}\;{\rightarrow}\;^4I_{15/2}$ intra-4f transition. As this corresponds to the low-loss window of silica-based optical fibers, Er-based light sources have become a mainstay of the long-distance telecom. In most telecom applications, $Er^{3+}$ ions are excited via resonant optical pumping. However, if nanocluster-Si (nc-Si) are co-doped with $Er^{3+}$, $Er^{3+}$ can be excited via energy transfer from excited electrical carriers in the nc-Si as well. This combines the broad, strong absorption band of nc-Si with narrow, stable emission spectra of $Er^{3+}$ to allow top-pumping with off-resonant, low-cost broadband light sources as well as electrical pumping. A widely used method to achieve nc-Si sensitization of $Er^{3+}$ is high-temperature annealing of Er-doped, non-stoichiometric amorphous thin film with excess Si (e.g.,silicon-rich silicon oxide(SRSO)) to precipitate nc-Si and optically activate $Er^{3+}$ at the same time. Unfortunately, such precipitation and growth of nc-Si into Er-doped oxide matrix can lead to $Er^{3+}$ clustering away from nc-Si at anneal temperatures much lower than ${\sim}1000^{\circ}C$ that is necessary for full optical activation of $Er^{3+}$ in $SiO_2$. Recently, silicon-rich silicon nitride (SRSN) was reported to be a promising alternative to SRSO that can overcome this problem of Er clustering. But as nc-Si formation and optical activation $Er^{3+}$ remain linked in Er-doped SRSN, it is not clear which mechanism is responsible for the observed improvement. In this paper, we report on investigating the effect of separating the nc-Si formation and $Er^{3+}$ activation by using hetero-multilayers that consist of nm-thin SRSO or SRSN sensitizing layers with Er-doped $SiO_2$ or $Si_3N_4$ luminescing layers.

• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.413-421
• /
• 2006

The bubble dynamics induced by direct laser heating is experimentally analyzed as a first step to assess the technical feasibility of laser-based ink-jet technology. To understand the interaction between laser light and ink, the absorption spectrum is measured for various ink colors and concentrations. The hydrodynamics of laser-generated bubbles is examined by the laser-flash photography. When an Ar ion laser pulse (wavelength 488 nm) with an output power up to 600 mW is incident on the ink solution through a transparent window, a hemispherical bubble with a diameter up to ${\sim}100{\mu}m$ can be formed with a lifetime in a few tens of microsecond depending on the laser power and the focal-spot size. Parametric study has been performed to reveal the effect of laser pulse width, output power, ink concentration, and color on the bubble dynamics. The results show that the bubble generated by a laser pulse is largely similar to that produced by a thin-film heater. Consequently, the present work demonstrates the feasibility of developing a laser-actuated droplet generation mechanism for applications in ink-jet print heads. Furthermore, the results of this work indicate that the droplet generation frequency is likely to be further increased by optimizing the process parameters.

• 한국정보통신학회논문지
• /
• 제11권1호
• /
• pp.139-149
• /
• 2007

비동기 OFCDM 시스템은 동기 시스템과 달리 반드시 셀 탐색과정을 가져야 한다 이 과정을 초기 동기라고 하며 초기 동기를 위한 셀 탐색 방법이 다음과 같이 3단계 방법으로 수행된다. 셀 탐색 1 단계에서 보호구간의 상관을 이용한 OFCDM 심볼 동기 즉, FFT 윈도우 타이밍 추정과 탐색 2 단계에서는 주파수영역에서 CSSC(Cell Specific Scrambling Code) 위상 천이성질을 이용한 CPICH(Common Pilot Channel)의 상관을 획득함으로써 프레임 타이밍 및 CSSC 그룹을 검출하고 마지막으로 탐색 3 단계에서 그룹 안에 속한 CSSC 위상 즉, 최적의 CSSC를 얻게 된다. 본 논문에서는 기존의 CPICH를 기반으로 하는 3단계 셀 탐색과정 중 2단계에서 그룹을 나타내는 그룹코드를 블록형태로 변형하여 이동국의 복잡도를 줄인다. 그러나 복잡도를 줄이면 성능에 영향을 주지만 블록형태로 구성했을 때 최소의 성능열화를 가지는 조합을 찾는다. 제안된 적절한 조합을 가지는 블록형태의 그룹코드는 모의실험 통하여 기존의 그룹코드와 거의 동일한 성능을 유지하면서 복잡도를 줄일 수 있음을 비교 검증하였다.

• 한국건설관리학회논문집
• /
• 제20권4호
• /
• pp.13-21
• /
• 2019

본 연구의 목적은 거주자가 하자정보를 정확하게 입력하고 건설회사와 정보를 공유 할 수 있는 하자정보 관리시스템에 대한 개선모델을 제시하는 것이다. 이를 위하여 기존의 하자정보 관리시스템을 고찰하고 거주자가 요구하는 기능을 적용하여 개선모델의 구조와 데이터 흐름 계통도를 제시하였다. 그리고 개선모델의 경제적 효과를 추정하였다. 상기와 같은 목적과 방법에 따라 도출된 결과는 다음과 같다. 빅 데이터와 연계하기 위한 하자정보 관리시스템의 정보입력화면에 대한 기본설계를 하였다. 또한 개선 모델을 활용함에 따라 유발되는 경제적 효과는 기존 방법 대비 약 151백만원이 절감되는 것으로 추정되었다.

• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.29-37
• /
• 2019

Synthetic Aperture Radar (SAR) observations are powerful tools to monitor surface's displacement very accurately, induced by earthquake, volcano, ground subsidence, glacier movement, etc. Especially, radar interferometry (InSAR) which utilizes phase information related to distance from sensor to target, can generate displacement map in line-of-sight direction with accuracy of a few cm or mm. Due to decorrelation effect, however, degradation of coherence in the InSAR application often prohibit from construction of differential interferogram. Offset tracking method is an alternative approach to make a two-dimensional displacement map using intensity information instead of the phase. However, there is limitation in that the offset tracking requires very intensive computation power and time. In this paper, efficiency of parallel computing has been investigated using high performance computer for estimation of glacier velocity. Two TanDEM-X SAR observations which were acquired on September 15, 2013 and September 26, 2013 over the Narsap Sermia in Southwestern Greenland were collected. Atotal of 56 of 2.4 GHz Intel Xeon processors(28 physical processors with hyperthreading) by operating with linux environment were utilized. The Gamma software was used for application of offset tracking by adjustment of the number of processors for the OpenMP parallel computing. The processing times of the offset tracking at the 256 by 256 pixels of window patch size at single and 56 cores are; 26,344 sec and 2,055 sec, respectively. It is impressive that the processing time could be reduced significantly about thirteen times (12.81) at the 56 cores usage. However, the parallel computing using all the processors prevent other background operations or functions. Except the offset tracking processing, optimum number of processors need to be evaluated for computing efficiency.

• 한국응급구조학회지
• /
• 제25권2호
• /
• pp.19-38
• /
• 2021

Purpose: This study aimed to investigate the relationship between emergency medical service accessibility in different regions and the sudden death rate in elderly patients with ischemic heart disease using data analysis techniques and suggest improvements in regional emergency medical services. Methods: The study collected data from the NEDIS database and Statistics Korea. Data on a total of 75,867 patients aged ≥65 years were reviewed among patients with ischemic heart disease who visited emergency medical institutions in 2018. Frequency analysis, chi-square test, multiple logistic regression analysis, and simple logistic regression analysis were performed using SPSS PC Window 25.0. Results: With an emergency medical resource per 100km², there was a concomitant reduction in the risk of death. There was a decrease in the death rate by 0.967, 0.970, 0.997, and 0.391 times with the increase in the presence of a fire department, an ambulance, a paramedic, and a regional medical center, respectively. Furthermore, a decrement in the death rate was witnessed 0.844, 0.825, and 0.975 times with the initiation of a local emergency medical center, a local emergency medical institution, and an angiography device, respectively(p <.001). Conclusion: To improve the accessibility of emergency medical services, the population and geometric area of the region should be considered essential factors when deploying emergency medical resources.

• 대한건축학회논문집:계획계
• /
• 제34권11호
• /
• pp.13-22
• /
• 2018

At the time when zero energy building is expected to be generalized, this study examines whether the investment in the passive element or the active element is more effective in terms of energy in the construction process of zero energy building. In other words, the effect of energy demand by passive element and the change of energy generation by active element are examined in terms of the same investment cost. The purpose of this study is to examine the change of energy demand by passive element and the change of energy generation by active element in zero energy building and to make reasonable investment decision by comparing energy with cost aspect. For this purpose, we selected the buildings to be subjected to energy simulation and derive the required energy amount and energy generation amount by using meteorological data of four regions in Korea. The change of energy demand and energy generation according to the change of application condition was derived. In order to compare and analyze the changes in energy demand and generation at the same cost standard through price survey and quotation of window and photovoltaic power generation equipment.

• 대한금속재료학회지
• /
• 제50권8호
• /
• pp.613-618
• /
• 2012

We report on electrical and mechanical properties of silicon nitride ($SiN_x$) films deposited by a plasma enhanced chemical vapor deposition (PECVD) method at $200^{\circ}C$ from $SiH_4$ highly diluted in $N_2$. The films were also prepared from $SiH_4$ diluted in He for comparison. The $N_2$ dilution was also effective in improving adhesion of the $SiN_x$ films, fascilitating construction of thin film transistors (TFTs). Metal-insulator-semiconductor (MIS) and Metal-insulator-Metal (MIM) structures were used for capacitance-voltage (C-V) and current-voltage (I-V) measurements, respectively. The resistivity and breakdown field strength of the $SiN_x$ films from $N_2$-diluted $SiH_4$ were estimated to be $1{\times}10^{13}{\Omega}{\cdot}cm$, 7.4 MV/cm, respectively. The MIS device showed a hysteresis window and a flat band voltage shift of 3 V and 0.5 V, respectively. The TFTs fabricated by using these films showed a field-effect mobility of $0.16cm^2/Vs$, a threshold voltage of 3 V, a subthreshold slope of 1.2 V/dec, and an on/off ratio of > $10^6$.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1388-1395
• /
• 2009

In March 2007, Korea's Ministry of Construction & Transportation (MOCT) established "Guidelines on the Computerization and Use of Geotechnical Investigation Results," which took effect as official instructions. The 2007 Geotechnical Information DB Construction Project is underway as a model project for a stable geotechnical information distribution system based on the MOCT guidelines, accompanied by user education on the geotechnical data distribution system. This study introduces a geotechnical data entry system characterized by the standardization of the geotechnical investigation form, the standardization of metadata for creating the geotechnical data to be distributed, and the creation of borehole space data based on the world geodetic system according to the changes in the national coordinate system, to define a unified DB structure and the items for the geotechnical data entry system and to computerize the field geotechnical investigation results using the MOCT guidelines. In addition, the present operating status of the geotechnical data entry system and entry data processing statistics are introduced through an analysis of the model project, and the problems of the project are analyzed to suggest improvements. Education on, and the implementation of, the model project for the geotechnical data entry system, which was developed via the standardization of the geotechnical investigation results form and the metadata for institutions showed that most users can use the system easily. There were problems, however, including those related to the complexity of metadata creation, partial errors in moving to the borehole data window, partial recognition errors in the installation program for different computer operating systems, etc. Especially, the individual standard form usage and the specificity of the person who enters the geotechnical information for the Korea National Housing Corporation, among the institutions under MOCT, required partial improvement of the geotechnical data entry system. The problems surfaced from this study will be promptly addressed in the operation and management of the geotechnical data DB center in 2008.