• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.837-840
• /
• 2003

Recently the multimedia streaming traffic such as digital audio and video in the Internet has increased tremendously. Unlike TCP, the UDP protocol, which has been used to transmit streaming traffic through the Internet, does not apply any congestion control mechanism to regulate the data flow through the shared network. If this trend is let go unchecked, these traffic will effect the performance of TCP, which is used to transport data traffic, and may lead to congestion collapse of the Internet. To avoid any adverse effort on the current Internet functionality, A study on a new protocol of modification or addition of some functionality to existing transport protocol for transmitting streaming traffic in the Internet is needed. TCP-frienly congestion control mechanism is classified with window-based congestion control scheme and rate-based congestion control scheme. In this paper, we propose an algorithm for improving the transmitting rate on a hybrid TCP-friendly congestion control scheme combined with widow-based and rate-based congestion control for multimedia streaming in the internet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.333-342
• /
• 2012

This paper presents a vowel onset point (VOP) detection method based on the human auditory system. This method maps the "perceptual" frequency scale, i.e. Mel scale onto a linear acoustic frequency, and then establishes a series of Triangular Mel-weighted Filter Bank simulate the function of band pass filtering in human ear. This nonlinear critical-band filter bank helps greatly reduce the data dimensionality, and eliminate the effect of harmonic waves to make the formants more prominent in the nonlinear spaced Mel spectrum. The sum of mel spectrum peaks energy is extracted as feature for each frame, and the instinct at which the energy amplitude starts rising sharply is detected as VOP, by convolving with Gabor window. For the single-word database which contains 12 vowels articulated with different kinds of consonants, the experimental results showed a good average detection rate of 72.73%, higher than other vowel detection methods based on short-time energy and zero-crossing rate.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.277-290
• /
• 1993

Dental caries is considered to be caused by demineralization by organic acid produced by microorganism. But the formation of subsurface lesion in initial caries make it diffcult to explain by simple demineralization. This study is carried out on the basis of thermodynamic concept proposed by Margolis and Moreno. The purpose of this study is to evaluate the effects of acid concentration and pH of lactate buffer system on the artificial caries lesion progress. 160 teeth without any crack, defect or opaque enamel were used and coated with nail varnish except the window ($2{\times}3$ mm). Under the constant degree of saturation(D.S.). The teeth were divided into 8 groups according to acid concentration(10mM, 25mM, 50mM, 100mM) and pH(4.3, 5.0, 6.0). Each group was immersed in buffer solution for 3, 6, 9, 18 days under controlled temperature($25^{\circ}C$). After cutting through the window and grinding, the specimens, 100-150 um in thickness, were imbibed in water or air and examined using polarilizing microscope. The depth of the surface and subsurface surface lesion were measured. 1. In the constant pH and D. S. value, the subsurface lesion progresses more rapidly as the concentration of lactic acid increases. (0.01, 0.025, 0.05, 0.1) 2. In the constant acid concentration and DS value, the subsurface lesion progresses more slowly as the pH increases. (4.3, 5.0, 5.5, 6.0) 3. The width of surface lesion seems to be constant independant of pH and acid concentration.

• Journal of Biosystems Engineering
• /
• v.17 no.1
• /
• pp.65-78
• /
• 1992

When using a computer vision system for a measurement, the geometrically distorted input image usually restricts the site and size of the measuring window. A geometrically distorted image caused by the image sensing and processing hardware degrades the accuracy of the visual measurement and prohibits the arbitrary selection of the measuring scope. Therefore, an image calibration is inevitable to improve the measuring accuracy. A calibration process is usually done via four steps such as measurement, modeling, parameter estimation, and compensation. In this paper, the efficient error calibration technique of a geometrically distorted input image was developed using a neural network. After calibrating a unit pixel, the distorted image was compensated by training CMLAN(Cerebellar Model Linear Associator Network) without modeling the behavior of any system element. The input/output training pairs for the network was obtained by processing the image of the devised sampled pattern. The generalization property of the network successfully compensates the distortion errors of the untrained arbitrary pixel points on the image space. The error convergence of the trained network with respect to the network control parameters were also presented. The compensated image through the network was then post processed using a simple DDA(Digital Differential Analyzer) to avoid the pixel disconnectivity. The compensation effect was verified using known sized geometric primitives. A way to extract directly a real scaled geometric quantity of the object from the 8-directional chain coding was also devised and coded. Since the developed calibration algorithm does not require any knowledge of modeling system elements and estimating parameters, it can be applied simply to any image processing system. Furthermore, it efficiently enhances the measurement accuracy and allows the arbitrary sizing and locating of the measuring window. The applied and developed algorithms were coded as a menu driven way using MS-C language Ver. 6.0, PC VISION PLUS library functions, and VGA graphic functions.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.449-455
• /
• 2010

Implantable middle ear hearing devices(IMEHDs) have being actively studied to overcome the problems of conventional hearing aids. Vibration transducer, an output devices of IMEHDs, is attached on the ossicular chain and transmits mechanical vibration to cochlea. This approach allows us to hear more clear sound because mechanical vibration is effective to transfer high frequency acoustics, but occurs some problems such as fatigue accumulation to ossicular chian and reduction of vibration displacement caused by mass loading effect. Recently, many studies for the round window stimulation are announced, because it does not cause such problems. It have been studied by older transducers designed for attaching on ossicular chain. In this paper, we proposed a new electromagnetic transducer which consists of two magnets, three coils and a vibration membrane. The magnet assembly, magnet coupled in opposite direction, were placed in the center of three coils, and the optimum length of each coil generating maximum vibrational force was calculated by finite element analysis(FEA). The transducer was implemented as the calculated length of each coil, and measured vibration displacement. From the results, it is verified the vibration displacement can be improved by optimizing the length of coils.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.304-309
• /
• 2004

Recently, the needs for multimedia stream such as digital audio and video in the Internet has increased tremendously. Unlike TCP, the UDP protocol, which has been used to transmit streaming traffic thorough the Internet, does not apply any congestion control mechanism to regulate the data flow thorough the shared network And it leads to congestion collapse of the Internet and results in long-term transmission delay. To avoid any adverse effect on the current Internet functionality, a now protocol of modification or addition of some functionality to perform congestion control and to reduce huge transmission delay in transmitting of multimedia stream are in study. TCP-friendly congestion control mechanism is classified into two : one is window-based congestion control scheme using general window management functionalities, the other is rate-based congestion control scheme using TCP modeling equation. In this paper, we propose an algorithm for improving the transmitting rate on a hybrid TCP-friendly congestion control scheme combined with widow-based and late-based congestion control for multimedia stream. And we also simulate the performance of improved TEAR implementation using NS. With He simulation results, we show that the improved TEAR can provide better fairness and lower rate fluctuations than TCP.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.67-67
• /
• 2000

CeO2는 cubic 구조의 일종인 CaR2 구조를 가지고 있으며 격자상수가 Si의 격장상수와 매우 비슷하여 Si 기판위에 에피텍셜하게 성장할 수 있는 가능성이 매우 크다. 따라서 SOI(silicon-on-insulator)구조의 실현을 위하여 Si 기판위에 CeO2 박막을 에피텍셜하게 성장시키려는 많은 노력이 있어왔다. 또한 metal-ferroelectric-semiconductor field effect transistor)에서 ferroelectric 박막과 Si 기판사이의 완충층으로 사용된다. 이러한 CeO2의 응용을 위해서는 Si 기판 위에 성장된 CeO2 박막의 방위성 및 CeO2/Si 구조의 전기적 특성을 알아보는 것이 매우 중요하다. 본 연구에서는 Si(100) 기판위에 CeO2(200)방향으로 성장하는 박막과 EcO2(111) 방향으로 성장하는 박막을 rf magnetron sputtering 방법으로 증착하여 각각의 구조적, 전기적 특성을 분석하였다. RCA 방법으로 세정한 P-type Si(100)기판위에 Ce target과 O2를 사용하여 CeO2(200) 및 CeO2(111)박막을 증착하였다. 증착후 RTA(rapid thermal annealing)방법으로 95$0^{\circ}C$, O2 분위기에서 5분간 열처리를 하였다 이렇게 제작된 CeO2 박막의 구조적 특성을 XRD(x-ray diffraction)방법으로 분석하였고, Al/CeO2/Si의 MIS(metal-insulator-semiconductor)구조를 제작하여 C-V (capacitance-voltage), I-V (current-voltage) 특성을 분석하였으며 TEM(transmission electron microscopy)으로 증착된 CeO2막과 Si 기판과의 계면 특성을 연구하였다. C-V특성에 있어서 CeO2(111)/Si은 CeO2(111)의 두께가 증가함에 따라 hysteresis windows가 증가한 방면 CeO2(200)/Si은 hysteresis windows가 아주 작을뿐만 아니라 CeO2(200)의 두께가 증가하더라도 hysteresis windos가 증가하지 않았다. CeO2(111)/Si과 CeO2(200)/Si의 C-V 특성의 차이는 CeO2(111)과 CeO2(200)이 Si 기판에 의해 받은 stress의 차이와 이에 따른 defect형성의 차이에 의한 것으로 사료된다.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.47-52
• /
• 2011

Currently, Exterior wall's U-value about building envelope is 0.36 W/$m^2K$(Central Region), but window's one is 2.1 W/$m^2K$ according to air gap of glazing, filling gas, coating and type of windows. The door"s one is 1.6~5.5 W/$m^2{\cdot}K$ depending on material and configuration of door. As such, energy loss per unit of door is considerably larger like windows. The door for the recognition was relatively low because energy loss through the door is relatively small compared to window area. In this paper, thermal performance was analyzed through simulation targeting the door which has thermal break that can improve the insulation performance and doesn't have one. As a results of simulations, case1 was calculated as the average of 1.63 w/m2k and case 2 was calculated as the average of 4.14 w/m2k. The thermal performance of door depends on the type and condition of insulations. As a results of final simulations, Case1 was calculated as 1.06 w/m2k and Case2 was calculated as 1.27 w/m2k. As a results of the experiments, thermal performance of case 1 was measured as 1.28 w/m2k. Error between experiments and simulations is considered problems encountered when creating the samples. The effect of door frame on the overall thermal performance is slight because it's a small proportion of the door frame.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.435-444
• /
• 2021

The purpose of this study is a descriptive research to understand the effects of isolation, depression, and resilience of nursing students on career identity. Data were collected on an online basis using a structured questionnaire from 136 nursing students at a university. The collected data were analyzed by t-test, ANOVA, Kruskal-Wallis test, Pearson's correlation coefficients and multiple linear regression analysis using SPSS Window 25.0 program. The influence factors on the career identity was confirmed by the resilience (β=0.32, p=.001) total explanatory power of the variables was found to be 20.5%. Therefore, based on the results of this study, it is necessary to strategy establish a positive career identity and develop an effective career identity promotion program by exerting individual resilience against to negative emotions such as isolation and depression.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.218-223
• /
• 2019

To prevent the low heating effect of heating system caused by the high sheet resistance of CVD graphene, multi-layered graphene was laminated to implement a Transparent plane heating system with good optical properties of low-resistance. Low-resistance plane heating system implemented by $300{\times}400{\times}5mm$ heating plane laminated multi-layered CVD graphene film and PWM control system to drive efficient power. A plane resistance value of $85.5{\Omega}/sq$ was measured on average for 4-layer CVD graphene film used as a heating plane. Thus, the transfer by thermal film as the method of implementing low-resistance CVD graphene is reasonable. The experimental results of heat test show that an average heat-rise rate in low-resistance, transperent plane heating system using CVD graphene is $10^{\circ}C/min$ and has an optical transmittance rate of 86.44%. Therefore, the proposed heating system is applicable to large window glass and vehicle heating window-shild-glass.