• Transactions on Electrical and Electronic Materials
• /
• v.17 no.1
• /
• pp.25-28
• /
• 2016

We investigate the effect of interface states on the endurance of a charge trap flash (CTF) NOR array using charge pumping methods. The endurance test was completed from one cell selected randomly from 128 bit cells, where the memory window value after 10² program/erase (P/E) cycles decreased slightly from 2.2 V to 1.7 V. However, the memory window closure abruptly accelerated after 10³ P/E cycles or more (i.e. 0.97 V or 0.7 V) due to a degraded programming speed. On the other hand, the interface trap density (Nit) gradually increased from 3.13×10¹¹ cm⁻² for the initial state to 4×10¹² cm⁻² for 10² P/E cycles. Over 10³ P/E cycles, the Nit increased dramatically from 5.51×10¹² cm⁻² for 10³ P/E cycles to 5.79×10¹² cm⁻² for 10⁴ P/E cycles due to tunnel oxide damages. These results show good correlation between the interface traps and endurance degradation of CTF devices in actual flash cell arrays.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.183-186
• /
• 2004

The metal-ferroelectric-insulator-semiconductor(MFIS) capacitors were fabricated using a metalorganic decomposition (MOD)method. The $CeO_2$ thin films were deposited as a buffer layer on Si substrate and $Bi_{3.25}La_{0.75}Ti_3O_{12}$ (BLT) thin films were used as a ferroelectric layer. The electrical and structural properties of the MFIS structure were investigated by varying the $CeO_2$ layer thickness. The width of the memory window in the capacitance-voltage (C-V)curves for the MFIS structure decreased with increasing thickness of the $CeO_2$ layer. Auger electron spectroscopy (AES) and transmission electron microscopy (TEM) show no interdiffusion by using the $CeO_2$ film as buffer layer between the BLT film and Si substrate. The experimental results show that the BLT-based MFIS structure is suitable for non-volatile memory field-effect-transistors (FETs) with large memory window.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.240-247
• /
• 2009

Wind tunnel test for Electro-Optical Targeting System(EOTS) has been conducted to investigate the aerodynamic characteristics, especially the torque characteristics of the rotating parts to insure the enough actuator power during the actual operation. The influence of EOTS's complex configuration, such as the observation window, has been investigated by comparing with the results of the simplified models made of half sphere and the cylinder. It has been found that the position of the observation window of EOTS has an effect on surface pressure distribution and the torque characteristics of the rotating observation part.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.729-733
• /
• 1998

The surface structure and the pore size distribution of the activated carbon impregnated with silver have been investigated. It has been confirmed that the impregnants had an effect only on the external surface, not on the internal surface and that adsorption isotherms of both impregnated and non-impregnated activated carbons were classified as a typical BET type-I. As the amount of the impregnants increased, the amounts of adsorption, the specific surface area, and the micropore volume decreased and the window blocking was observed. The average pore diameter of the activated carbon impregnated with silver was observed to show the constant values regardless of the amount of the impregnants.

• KIEAE Journal
• /
• v.5 no.4
• /
• pp.3-8
• /
• 2005

The objective of this study is to examine the impact of the Phytofiltration system on the improvement of indoor air quality. Measurement was performed in a full-scale mock up model to examine the purification efficiency of air by plants. Seven species of plants, which were recommended by NASA, were used in measurements. Two species of plants that showed outstanding purifying effects were chosen for further measurements. The measurements were performed according to the positions and amounts of plants. Thermal environment, the concentration of Toluene and Formaldehyde were monitored. Ficus Benjamiana and Aglaonema brevispathum were excellent in diluting the concentration of contaminants. The effect of diluting concentration became better as the amount of plants increased. The reducing effect was the best when the plants were placed near window.

• Progress in Medical Physics
• /
• v.26 no.2
• /
• pp.87-92
• /
• 2015

The gated RapidArc may produce a dosimetric error due to the stop-and-go motion of heavy gantry which can misalign the gantry restart position and reduce the accuracy of important factors in RapidArc delivery such as MLC movement and gantry speed. In this study, the effect of stop-and-go motion in gated RapidArc was analyzed with varying gating window time, which determines the total number of stop-and-go motions. Total 10 RapidArc plans for treatment of liver cancer were prepared. The RPM gating system and the moving phantom were used to set up the accurate gating window time. Two different delivery quality assurance (DQA) plans were created for each RapidArc plan. One is the portal dosimetry plan and the other is MapCHECK2 plan. The respiratory cycle was set to 4 sec and DQA plans were delivered with three different gating conditions: no gating, 1-sec gating window, and 2-sec gating window. The error between calculated dose and measured dose was evaluated based on the pass rate calculated using the gamma evaluation method with 3%/3 mm criteria. The average pass rates in the portal dosimetry plans were $98.72{\pm}0.82%$, $94.91{\pm}1.64%$, and $98.23{\pm}0.97%$ for no gating, 1-sec gating, and 2-sec gating, respectively. The average pass rates in MapCHECK2 plans were $97.80{\pm}0.91%$, $95.38{\pm}1.31%$, and $97.50{\pm}0.96%$ for no gating, 1-sec gating, and 2-sec gating, respectively. We verified that the dosimetric accuracy of gated RapidArc increases as gating window time increases and efforts should be made to increase gating window time during the RapidArc treatment process.

• The Research Journal of the Costume Culture
• /
• v.23 no.1
• /
• pp.63-73
• /
• 2015

The purpose of this study was to investigate the effect of congruency of parent brand image with self-image, perceived risk, and product knowledge on the attitude towards extended product in fashion brand extension. A survey questionnaire was used to collect data from 170 female college students and collected data were subjected to descriptive analysis and regression analysis using SPSS Window program. The results of this study showed that the congruency of parent brand image with self-image and perceived risk had a positive effect on attitude towards extended product, whereas product knowledge had a negative effect on attitude towards extended product in fashion brand extension. Also, the congruency of parent brand image with self-image had a positive effect on the attitude towards extended product in fashion brand extension with positive moderating effect of perceived risk and negative mediating effect of product knowledge.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.13-18
• /
• 2010

Extreme ultraviolet (EUV) lithography using 13.5 nm wavelengths is expected to be adopted as a mass production technology for 32 nm half pitch and below. One of the new issues introduced by EUV lithography is the shadowing effect. Mask shadowing is a unique phenomenon caused by using mirror-based mask with an oblique incident angle of light. This results in a horizontal-vertical (H-V) biasing effect and ellipticity in the contact hole pattern. To minimize the shadowing effect, a refilled mask is an available option. The concept of refilled mask structure can be implemented by partial etching into the multilayer and then refilling the trench with an absorber material. The simulations were carried out to confirm the possibility of application of refilled mask in 32 nm line-and-space pattern under the condition of preproduction tool. The effect of sidewall angle in refilled mask is evaluated on image contrast and critical dimension (CD) on the wafer. We also simulated the effect of refilled absorber thickness on aerial image, H-V CD bias, and overlapping process window. Finally, we concluded that the refilled absorber thickness for minimizing shadowing effect should be thinner than etched depth.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.67-74
• /
• 2008

This paper proposes two peak-windowing algorithms for peak-to-average power reduction(PAPR) of orthogonal frequency division multiple access(OFDMA) downlink systems. The Proposed algorithms mitigate the effect of excessive suppression due to successive peaks or relatively high peaks of the signal. First, multi-stage peak windowing algorithm is proposed, which exploits multiple threshold of target PAPR in order to step down the peaks gradually. Secondary, variable-length peak windowing algorithm is proposed, which adapts the window length with respect to the existence of successive peaks within a half of window length. Therefore, the proposed method reduces the distortion of signal amplitude caused by window overlapping. The proposed algorithms outperform the conventional peak windowing with the aid of window-length adaptation or sequential peak power reduction. Simulation results show the efficiency of the proposed algorithms over OFDMA downlink systems, especially WiBro systems.

• Journal of KIISE:Databases
• /
• v.33 no.2
• /
• pp.201-213
• /
• 2006

A time-series database is a set of time-series data sequences, each of which is a list of changing values of the object in a given period of time. Subsequence matching is an operation that searches for such data subsequences whose changing patterns are similar to a query sequence from a time-series database. This paper addresses a performance issue of time-series subsequence matching. First, we quantitatively examine the performance degradation caused by the window size effect, and then show that the performance of subsequence matching with a single index is not satisfactory in real applications. We argue that index interpolation is fairly useful to resolve this problem. The index interpolation performs subsequence matching by selecting the most appropriate one from multiple indexes built on windows of their inherent sizes. For index interpolation, we first decide the sites of windows for multiple indexes to be built. In this paper, we solve the problem of selecting optimal window sizes in the perspective of physical database design. For this, given a set of query sequences to be peformed in a target time-series database and a set of window sizes for building multiple indexes, we devise a formula that estimates the cost of all the subsequence matchings. Based on this formula, we propose an algorithm that determines the optimal window sizes for maximizing the performance of entire subsequence matchings. We formally Prove the optimality as well as the effectiveness of the algorithm. Finally, we perform a series of extensive experiments with a real-life stock data set and a large volume of a synthetic data set. The results reveal that the proposed approach improves the previous one by 1.5 to 7.8 times.