• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.161-167
• /
• 2007

Zero Energy Multi-House(ZeMH) signifies a residential building which can be self sufficient with just new and renewable energy resources without the aid of any existing fossil fuel. For success of ZeMH, various innovative energy technologies Including passive and active systems should be well integrated with a systematic design approach. The first step for ZeMH is definitely to minimize the conventional heating and cooling loads over 50% with major energy conservation measure and passive solar features which are mainly related to building design components such as super-insulation, super window, including infiltration and ventilation issues. The purpose of this study is to analyze the thermal effect of various building design components in the early design of ZeMH. The process of the study is presented in the following. 1) selection reference model for simulation 2) verification of reference model with computer simulation program(ESP-r 9.0). 3) analysis of effect according to insulation-thickness, kinds of windows, rate of infiltration. and The simulation results indicate that almost 50% savings of conventional heating load in multi-house can be achieved with the optimum design of building components such as super insulation, super window, infiltration, ventilation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.649-652
• /
• 2015

Previous marking policy for the AF service of TCP traffic in the Diffserv network have no sufficient consideration on the effect of RTT and target rate. In this paper, in order to improve fairness Index by the effect RTT difference of TCP traffic, we propose the modified TSW3CDM(Time Sliding Window Three Color Dynamic Marker) based on average transfer rate estimation and the flow state. The proposed algorithm is dynamic marking policy that do allocate band width in proportion to transmission rate. To evaluate the performance of the proposed algorithm, We accomplished a computer simulation using NS-2. From simulation results, the proposed TSW3CDM algorithm improves fairness index by comparison with TSW3CM.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.339-343
• /
• 2005

Pt-$SrBi_2Nb_2O_9(SBN)-Pt-Y_2O_3-Si$ gate field effect transistors (MFMISFETs) have been fabricated and the SBN thin films are rapid thermal annealed in oxygen plasma. The grain size of the SBN becomes 4 times much larger than that of furnace annealed SBN films even at the same annealing temperature of $700^{\circ}C$, remnant polarization value of Pt-SBN-Pt is improved by 2 times. Using the rapid grain growth of SBN for the MFM-ISFET, memory window and programming characteristics of on/off states are fairly well improved.

• The Research Journal of the Costume Culture
• /
• v.23 no.3
• /
• pp.400-411
• /
• 2015

Successful use of displays in stores arouses consumers' curiosity, and induces them to purchase a product after a visit. Facade is a word meaning an external front wall of a building, and is usually the first point of visual contact for the consumers. The present study is an empirical investigation of external appearance of a clothing store, with a $2{\times}2{\times}2$ factorial design of facade, show window, and wall surface material designed for the purpose of the study. Dependent variables were store image variables and attitude toward store. A total of 320 questionnaires from male and female consumers were used for the analysis. Facade type and material had significant main and interaction effects, while show window type had no meaningful effects overall. A facade of irregular design prompted significantly higher levels of perceived 'elegance', 'uniqueness', and 'attractiveness' of the store. Material itself did not have significant influence but did have significant interaction effect with facade design. The interaction effect was found in store attitude as well. In order to create a positive store attitude, a concrete material facade should have an irregular design. Companies owning fashion brands should carefully select facade type and wall surface material in the visual merchandising strategies of a store.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.171-172
• /
• 2007

We fabricated the metal-ferroelectric-insulator-semiconductor filed-effect transistors (MFIS-FETs) using the $(Bi,La)_4Ti_3O_{12}\;and\;LaZrO_x$ thin films. The $LaZrO_x$ thin film had a equivalent oxide thickness (EOT) value of 8.7 nm. From the capacitance-voltage (C-V) measurements for an Au/$(Bi,La)_4Ti_3O_{12}/LaZrO_x$/Si MFIS capacitor, a hysteric shift with a clockwise direction was observed and the memory window width was about 1.4 V for the bias voltage sweeping of ${\pm}9V$. From drain current-gate voltage $(I_D-V_G)$ characteristics of the fabricated Fe-FETs, the obtained threshold voltage shift (memory window) was about 1 V due to ferroelectric nature of BLT film. The drain current-drain voltage $(I_D-V_D)$ characteristics of the fabricated Fe-FETs showed typical n-channel FETs current-voltage characteristics.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1996-1999
• /
• 2003

Stereo matching is an important technique in the are of computer vision. There are already many theorems to find disparity map using stereo images. Usually, disparity is searched by using block matching. However block matching result in blocking effects caused by using fixed size window for computing pixel correlations. This paper suggests an efficient method to remove the blocking effect in stereo matching procedures.

• Journal of Communications and Networks
• /
• v.6 no.3
• /
• pp.226-234
• /
• 2004

This work presents a deterministic channel that rules according to inverse a power propagation law. The proposed channel model allows us to derive the lower bound and upper bound of packet's capture probability in Rayleigh fading and shadowing cellular mobile system. According to these capture probabilities, we analyze the system performance in the case of finite stations and finite communicated coverage of a base station. We also adopted a dynamic backoff window size to discuss the robustness of IEEE 802.11 draft standard. Some suggestions and conclusions from numerical results are given to establish the more strong CSMA/CA protocol.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.585-591
• /
• 2014

An improved numerical scattering model with the 2-dimensional moment method including roof-top basis and a modified window-function to reduce edge-effect is presented in this study. The roof-top basis function is used to depict randomly positioned surface currents and increase an efficiency of the moment method. To reduce the edge-effect which occurs at the end of numerically generated surfaces, an enhanced window-function which is weighted by incident angle variable is proposed. To validate an proposed 2-dimensional scattering model and numerical analysis techniques for randomly rough surfaces, computational results are compared and analyzed to SPM(Small Perturbation Model) as well.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.207-216
• /
• 2014

The energy loss can be divided into the loss caused by heat transfer and the loss caused by air flow. Heat transfer is the loss resulting from the heat transmittance of external wall, roof, and floor, and represents one of the most vulnerable elements of existing buildings. To prevent such loss, it is necessary to increase the mean heat transmittance of entire external wall, including the window, to a level above the standard regional value and ensure the air-tightness of window. The old buildings have the structure which is prone to the loss of greater air flow due to the air infiltration through the exit/entrance door upward along the stairway by the stack effect and simultaneous suction of air from each floor, and becomes even vulnerable to the loss of heat insulation for each floor, although the external wall and windows are the most vulnerable parts. The improvement plans for each floor need to be submitted in tandem with the diagnosis of whole building, regarding the diagnosis plan and energy improvement measures based on the survey of site, rather than adhering to the misconception that the replacement of window alone will result in energy-savings.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.4
• /
• pp.716-732
• /
• 2016

Focusing on the communication effects of fast fashion visual merchandising (VM), this paper examines the effects of a fast fashion store's VM attributes on consumer's perceptions of store image towards newness and prestige that influence the time spent at stores as well as the frequency of visits. This study was conducted by collecting data online using males and females in their twenties to forties; subsequently, a total of 382 samples were analyzed. The VM communication effect model utilized in fast fashion stores was developed and tested on structural equation modeling. The findings of the study were as follows. First, the show window presentation and ancillary facilities of VM elements have a positive effect on the perception of newness, while merchandise display, layout, and signage have a positive influence on the perception of prestige. Therefore, the VM elements in the fast fashion stores that affect the perception of newness and prestige are unique. Second, the perceptions of newness and prestige have a positive impact on time spent in fast fashion stores; however, only the perception of store's newness has a significant effect on the frequency of visits. Third, show window presentation and facilities are VM elements that directly influence the time spent and frequency of visits. Finally, we confirm that store image partially mediate between VM elements and shopping behavior at a fast fashion store.