• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.759-766
• /
• 2002

Regular, spherical and isotropic open-microcellular foams having low density were prepared by the high internal phase emulsion (HIPE) polymerization mainly composed of styrene monomer and water The effects of Polymerization conditions. such as the content of water, divinylbenzene as a crosslinking agent and dodecane as a chain transfer agent, were investigated based on the tell size and foam properties. The microstructural morphology was observed using scanning electron microscopy (SEM) and the compression modulus of the foam was evaluated using compression test. The dropwise feeding of the aqueous phase into the oil phase was more effective than the batch feeding in producing the uniform and stable foam. Agitation speed and surfactant strongly influenced on the cell size and the window size between water droplets. Introduction of chain transfer agent increased the cell size, whereas it decreased the window size. Compression modulus increased with the crosslinking agent, but decreased with the chain transfer agent.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.9-17
• /
• 1999

In this paper, we present a mathematical modeling and perform a performance analysis of double-dwell serial search algorithm, which has a search window concept, for pilot channel in DS-CDMA(Direct Sequence Code Division Multiple Access). We derive a code detection function, a false alarm function, a code miss function, and a mean code acquisition time for the performance analysis. We calculate the mean code acquisition time of the mathematical model in IS-95 forward link and compare it with that of the conventional search methods. The performance of the code acquisition system is also evaluated to investigate the effect of dwell times and search window size. The JTC channel model, which is a PCS channel model in North America, is used for the analysis. The numerical result shows that the mean code acquisition time of the double-dwell serial search algorithm with a search window is reduced by about 17%~25% than those of the conventional ones.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.175-180
• /
• 2013

We developed the contamination prevention module of an optical window for an In-Situ Particle Monitor (ISPM) system. the core part of the module is the generator of an ultrasonic wave and the module is to remove particles stuck to the window by the transfer of the wave force to the window surface. In order to enhance transfer efficiency of the waves the frequency of the ultrasonic wave was optimized and a low impedance material (plexiglass) and a soft sealing material (Si rubber) were used. The ISPM with the developed module was installed at the exhaust line of a BPSG CVD equipment and the effect of the module was verified.

• Korean Journal of Metals and Materials
• /
• v.48 no.3
• /
• pp.256-261
• /
• 2010

In this work, high-k dielectric stacks of $HfO_2$ and $HfO_2$/$Al_2O_3$/$HfO_2$ (HAH) were deposited on $SiO_2/Si$ substrates by atomic layer deposition as charge trapping layers in charge trapping devices. The structural stability and the charge trapping characteristics of such stacks were investigated using Metal-Alumina-Hafnia-Oxide-Silicon (MAHOS) structure. The surface roughness of $HfO_2$ was stable up to 11 nm with the insertion of 0.2 nm thick $Al_2O_3$. The effect of the thickness of the HAH stack and the thickness of intermediate $Al_2O_3$ on charge trapping characteristics were investigated for MAHOS structure under various gate bias pulse with duration of 100 ms. The threshold voltage shift after programming and erase showed that the memory window was increased with increasing bias on gate. However, the programming window was independent of the thickness of HAH charge trapping layers. When the thickness of $Al_2O_3$insertion increased from 0.2 nm to 1 nm, the erase window was decreased without change in the programming window.

• The Korean Journal of Financial Management
• /
• v.25 no.4
• /
• pp.183-212
• /
• 2008

The purpose of this paper is to analyze the efficiency change and determinants of the korean non-life insurance companies. we use DEA (Data Envelopment Analysis) model to measure company efficiency change and use GLS, Tobit model, FIixed effect model, Random effect model, GMM to measure efficiency determinants. we utilize ten non-life insurance companies in korea and the panel data for five from 2001 to 2005. The empirical results show the following findings. First, technical efficiency shows that approximately 15.5% of inefficiency exists on the non-life insurance companies and it reveals that the cause for technical inefficiency is due to scale inefficiency. Second, Dea Window results show that the stable dissimilarity by standard deviation, LDP of CCR. Third, the results of efficiency determinants show that increase efficiency is depend on the premium income and real estates.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.597-598
• /
• 2014

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2009

This study was performed to evaluate the effect of the level of stocking density of housing with or without window on chicken meat quality. The incidence of $1^+$ grade of whole chicken housed with window significantly influenced by stocking density. The incidence of $1^+$ grade chicken at high stocking density ($0.050\;m^2$/head), standard stocking density ($0.066\;m^2$/head), and low stocking density ($0.083\;m^2$/head) was 26, 52, and 66%, respectively. Breast muscle of chicken housed with window and with low stocking density showed higher incidence of $1^+$ grade than high stocking density. Also minor and severe PSE (pale, soft, extractive) incidence of chicken meat were showed 4% each, while the $1^+$ grade chicken was not appeared at low density. In chicken thigh, the incidence rate was not affected by stocking density. In chicken housed without window, the incidence of $1^+$ grade chicken in high, standard, and low stocking density was 18, 8, and 46%, respectively. Also, the incidence of $1^+$ grade chicken breast was 2.6 times higher than the chicken in low stocking density. However, incidence of $1^+$ grade thigh was not affected by the stocking density. These results suggest that high stocking density significantly reduced the incidence of $1^+$ grade chicken meat regardless of housing with or without window.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.195-200
• /
• 1998

We have investigated the crystal structure and electrical properties of Pt/SBT/$CeO_2$/Si(MFIS) and Pt/SBT/Si(MFS) structures for the gate oxide of ferroelectric memory. XRD spectra and SEM showed that the SBT film of SBT/$CeO_2$/Si structure had larger grain than that of SBT/Si structure. Furthermore HRTEM showed that SBT/$CeO_2$/Si had 5 nm thick $SiO_2$layer and very smooth interface but SBT/Si had 6nm thick $SiO_2$layer and 7nm thick amorphous intermediate interface. Therefore, $CeO_2$film between SBT film and Si substrate is confirmed as a good candidate for a diffusion barrier. The remanent polarization decreased and coercive voltage increased in Pt/SBT/$CeO_2/Pt/SiO_2$/Si structure. This effect may increase memory window of MFIS structure directly related to the coercive voltage. From the capacitance-voltage characteristics, the memory of Pt/SBT(140 nm)/$CeO_2$(25 nm)/Si structure were in the range of 1~2 V at the applied voltage of 4~6 V. The memory window increased with the thickness of SBT film. These results may be due to voltage applied at SBT films. The leakage currents of Pt/SBT/$CeO_2$/Si and Pt/SBT/Si were $ 10^8A/\textrm{cm}^2$ and $ 10^6 A/\textrm{cm}^2$, respectively.

• Management Science and Financial Engineering
• /
• v.4 no.2
• /
• pp.43-58
• /
• 1998

Packet switch is a key component in high speed digital networks. This paper investigates congestion phenomena in the packet switching with input buffers. For large value of switch size N, mathematical models have been developed to analyze asymptotic maximum switch throughput under nonuniform traffic. Simulation study has also been done for small values of finite N. The rapid convergence of the switch performance with finite switch size to asymptotic solutions implies that asymptotic analytical solutions approximate very closely to maximum throughputs for reasonably large but finite N. Numerical examples show that non-uniformity in traffic pattern could result in serious degradation in packet switch performance, while the maximum switch throughput is 0.586 when the traffic load is uniform over the output trunks. Window scheduling policy seems to work only when the traffic is relatively uniformly distributed. As traffic non-uniformity increases, the effect of window size on throughput is getting mediocre.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.2
• /
• pp.109-118
• /
• 2008

We present a robust localization algorithm using particle filter for mobile robots in a dynamic environment. It is difficult to describe moving obstacles like people or other robots on the map and the environment is changed after mapping. A mobile robot cannot estimate its pose robustly with this incomplete map because sensor observations are corrupted by un-modeled obstacles. The proposed algorithms provide robustness in such a dynamic environment by suppressing the effect of corrupted sensor observations with a selective update or a sampling from non-corrupted window. A selective update method makes some particles keep track of the robot, not affected by the corrupted observation. In a sampling from non-corrupted window method, particles are always sampled from several particle sets which use only non-corrupted observation. The robustness of proposed algorithm is validated with experiments and simulations.