• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2022

Learning C programming language in electronics education is an important basic education course for understanding computer programming and acquiring the ability to use microprocessors in embedded systems. In order to focus on understanding basic grammar and algorithms, it is a common teaching method to write programs based on C standard library functions in the console window and learn theory and practice in parallel. However, if a student wants to start a project activity or go to a deeper stage after acquiring some basic knowledge of the C language, using only the C standard library function in the console window limits what a student can express or control with the C program. For the purpose of making it easier for a student to use graphics or multimedia resources and increase educational value, this paper studies a case of applying Simple DirectMedia Layer (SDL), an open source software, into the C programming language learning process. The SDL-based programming course applied after completing the basic programming curriculum performed in the console window is introduced, and the educational value is evaluated through a survey. As a result, more than 56% of the respondents expressed positive opinions in terms of improved application ability, stimulating interest, and overall usefulness, and less than 4% of them had negative opinions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.138-138
• /
• 2009

Recently, thin-film solar cells of Cu(In,Ga)$Se_2$(CIGS) have reached a high level of performance, which has resulted in a 19.9%-efficient device. These conventional devices were typically fabricated using chemical bath deposited CdS buffer layer between the CIGS absorber layer and ZnO window layer. However, the short wavelength response of CIGS solar cell is limited by narrow CdS band gap of about 2.42 eV. Taking into consideration the environmental aspect, the toxic Cd element should be replaced by a different material. It is why during last decades many efforts have been provided to achieve high efficiency Cd-free CIGS solar cells. In order to alternate CdS buffer layer, ZnS buffer layer is grown by using chemical bath deposition(CBD) technique. The thickness and chemical composition of ZnS buffer layer can be conveniently by varying the CBD processing parameters. The processing parameters were optimized to match band gap of ZnS films to the solar spectrum and exclude the creation of morphology defects. Optimized ZnS buffer layer showed higher optical transmittance than conventional thick-CdS buffer layer at the short wavelength below ~520 nm. Then, chemically deposited ZnS buffer layer was applied to CIGS solar cell as a alternative for the standard CdS/CIGS device configuration. This CIGS solar cells were characterized by current-voltage and quantum efficiency measurement.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.25-31
• /
• 2015

In this paper, we propose PEP based on cross-layer and network coding in digital video broadcasting-return channel via satellite (DVB-RCS) networks. In particular, we propose not only a scheme of cross-layer information exchange for interaction between TCP and the resource allocation (RA) scheme in the link layer but also a tuning algorithm for the TCP contention window (CWND) by using information on the RA in the link layer and the redundancy rate for network-coded packets. The simulation results show that TCP CWND can be adjusted by RA information in the proposed protocol. Furthermore, through the transmission of network-coded packets and the proposed CWND tuning algorithm, TCP throughput is enhanced in lossy environment due to user mobility without the unnecessary resource overhead.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.3
• /
• pp.127-130
• /
• 2011

We investigated the effects of $O_2$ annealing (i.e., temperature and time) on the characteristics of hafnium silicate ($HfSi_xO_y$) films deposited on a Si substrate by atomic layer deposition process (ALD). We found that the post deposition annealing under oxidizing ambient causes the oxidation of residual Hf metal components, resulting in the improvement of electrical characteristics (e.g., hysteresis window and leakage current are decreased). In addition, we observed the annealing temperature is more important than the annealing time for post deposition annealing. Based on these observations, we suggest that post deposition annealing under oxidizing ambient is necessary to improve the electrical characteristics of $HfSi_xO_y$ films deposited by ALD. However, the annealing temperature has to be carefully controlled to minimize the regrowth of interfacial oxide, which degrades the value of equivalent oxide thickness.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.1
• /
• pp.6-10
• /
• 2007

For low-emissivity application on window glass, coalescence of thin film silver islands is crucial for high transmittance in the visible and high reflectance in the infrared. It is well known that the underlayer affects the growth mode. In this work, the effect of the underlayer on the growth of silver films deposited by filtered cathodic vacuum arc is discussed. While a nominal 0.1 nm niobium underlayer has promoted the coalescence of silver islands, a 0.2 nm layer did not show these features. From a thermodynamic approach, Nb seeding less one monolayer is considered to reduce the surface energy between the silver atoms and $Nb/TiO_2$ surface, resulting the change of its growth from 3D islands to 2D-layer modes. If the seed layer exceeds one monolayer, however, a rougher surface is formed because the surface energy of Nb itself is superior to that of $Nb-TiO_2$. The onset of silver layer on the roughened Nb surface is required more silver.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.70.3-70.3
• /
• 2015

After a short description of the telescope, we will report on the recent developments in three main areas: - Commissioning of the last of LBT's first generation instruments, now well underway, - Adaptive Optics (AO) and ground-layer AO progress and planned upgrades, - Interferometry first science results. We will also explore the future of the facility as it moves to full operation and strive to be the first of the ELTs in the decade-long window in which GMT, TMT, and E-ELT break ground and start taking shape.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.21-24
• /
• 2000

End-to-end congestion control mechanism have been critical to the robustness and stability of the Internet. Most of today's Internet traffic is TCP, and we expect this to remain so in the future. TCP/IP is the intermediate transport layer candidate for today's applications. TCP uses an adaptive window-based flow control. The congestion avoidance and control algorithms deployed by TCP aims at using the available network bandwidth. This paper compares different congestion control policies, and proposes the new design mechanism for future public networks

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.69.1-69.1
• /
• 2007

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1990.10a
• /
• pp.63-68
• /
• 1990

The nature of fluctuating air pressure inside building was studied by testing a building model in a wind tunnel. The model has a single room and a sin81e window opening. Various opening conditions were tested in both laminar uniform wind and turbulent boundary-layer wind. The RMS and the spectra of the fluctuating internal pressure were measured. The test results support a recent theory which predicts the behavior of internal pressure under high wind based on aerodynamic analysis.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.4
• /
• pp.111-122
• /
• 1999

In this paper, we consider a queueing network model. where the population constraint within each subnetwork is controlled by a semaphore queue. The total number of customers that may be present in the subnetwork can not exceed a given value. Each node has a constant service time and the arrival process to the queueing network is an arbitrary distribution. A major characteristics of this model is that the lower layer flow is halted by the state of higher layer. We present some properties that the inter-change of nodes does not make any difference to customer's waiting time in the queueing network under a certain condition. The queueing network can be transformed into a simplified queueing network. A dramatic simplification of the queueing network is shown. It is interesting to see how the simplification developed for sliding window flow control, can be applied to multi-layered queueing network.