• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.21-26
• /
• 2008

We fabricated nano-particles of ZnO, $In_2O_3$ and $SnO_2$ by using the chemical reaction between metal thin films and polyamic acid. The average size and density of these ZnO, $In_2O_3$ and $SnO_2$ nano-particles was approximately 10, 7, and 15 nm, and $2{\times}10^{11},\;6{\times}10^{11},\;2.4{\times}10^{11}cm^{-2}$, respectively. Then, we fabricated nano-floating gate memory (NFGM) devices with ZnO and $In_2O_3$ nano-particles embedded in the devices' polyimide dielectrics and silicon dioxide layers as control and tunnel oxides, respectively. We measured the current-voltage characteristics, endurance properties and retention times of the memory devices using a semiconductor parameter analyzer. In the $In_2O_3$ NFGM, the threshold voltage shift (${\Delta}V_T$) was approximately 5 V at the initial state of programming and erasing operations. However, the memory window rapidly decreased after 1000 s from 5 to 1.5 V. The ${\Delta}V_T$ of the NFGM containing ZnO was approximately 2 V at the initial state, but the memory window decreased after 1000 s from 2 to 0.4 V. These results mean that metal-oxide nano-particles have feasibility to apply NFGM devices.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.10 s.340
• /
• pp.39-50
• /
• 2005

In this paper, we propose a performance improving MAC algerian for the IEEE 802.11 DCF. WLAN based IEEE 802.11 uses two control methods called 'Distributed Coordination Function(UF)' and 'Point Coordination Function(PCF)'. The nF controls the Urnsmission based on carrier sense multiple access with collision detection(CSMA/CA), that decides a random backoff time with the range of contention window for each terminal. Normally, each terminal the CW double after collision, and reduces the CW to the minimum after successful transmission. This paper proposes an enhanced DCF algorithm that decreases the CW smoothly after successful transmission in order to reduce the collision Probability by utilizing the current status information of WLAN. We also analyze the throughput and delay performance for the unsaturated case mathematically. Simulation results show that our algorithm enhances the saturation throughput of WLAN. They also coincide well with the analytical results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.970-979
• /
• 1993

In this paper, a multi-function processor unit is implemented for binary image processing. This unit consists of a set of address generatior, window pipeline register, look up table, control unit, and two local memories .The merits of multi-function processor unit are more simpler than basic SAP and improved disposal speed. A simple software selection give the various choices of image sizes and it can process the function of smoothing, thinning, feature extraction, and edge detection, selectively or sequentially.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.2
• /
• pp.107-111
• /
• 1999

We developed the experimental function (ERF) which can be used for the numerical curve fitting analysis in photoelectron spectroscopy (PES). We selected the core-levels of Ag 3d5/2 and Au 4f7/2 to obtain the ERF from the measured core-level spectra. For the numerical fourier transformation we applied the fast transform (FFT) algorithm. we considered optical (Wiener) filtering with the FFT due to noise and used Hann window function to remedy the information leakage in frequency domain due to discrete and finite sampling of measurement. The comparison of the curve fitting results using the ERF obtained in this work and the mathematical response function with a gaussian in the conventional approach shows clearly the improvement of the curve fitting analysis.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.80-87
• /
• 1994

Fetal monitoring is a routine procedure to obtain a record of physiologic functions during pregnancy and labor. It is required to determine fetal heart frequency accurately. There are various types of fetal heart rate(FHR) determination and the most frequently applied method is transabdominal Doppler ultrasound. However, in the case of weak or noise corrupted Doppler ultrasound signals, conventional peak detections and the autocorrelation function method have many difficulties to determine FHR precisely. Also the autocorrelation function is effected by threshold level and window size. To solve these problems, the high resolution pitch determination algorinthm is introduced to detect FHR from Doppler ultrasound signals. This scheme digitally processes Doppler ultrasound signal for digital rectification, envelope detection, decimation and correlation calculation of two interconnected segments and then FHR is determined by its maximal value. Even in the case of a greatly smeared noise signal, this algorithm is able to search FHR more accurately than autocorrelation function by means of compensating FHR with a constant correlation threshold. This algorithm is simulated by 386-MATLAB on PC 486/DX and verified that it is superior to the autocorrelation function method.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.747-752
• /
• 2011

The position detection of overlapping area in the interframe for image stitching using auto and cross correlation function (ACCF) and compounding one image with the stitching algorithm is presented in this paper. ACCF is used by autocorrelation to the featured area to extract the filter mask in the reference (previous) image and the comparing (current) image is used by crosscorrelation. The stitching is detected by the position of high correlation, and aligns and stitches the image in shifting the current image based on the moving vector. The ACCF technique results in a few computations and simplicity because the filter mask is given by the featuring block, and the position is enabled to detect a bit movement. Input image captured from CMOS is used to be compared with the performance between the ACCF and the window correlation. The results of ACCF show that there is no seam and distortion at the joint parts in the stitched image, and the detection performance of the moving vector is improved to 12% in comparison with the window correlation method.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.295-305
• /
• 1994

The reflection coefficient of a material at oblique incidence is measured in a free field. The sound pressure distributions are measured at discrete points on two measurement lines and then decomposed into plane wave components by using spatial Fourier transform. The inciedent and reflected plane wave components are obtained from a set of "decomposition equations" of which uses the plane wave propagation theory. Numerical simulations and experiments have been performed to see the effect of finite size of measurement area. To reduce this effect, a window fuction has been performed to see the effects of finite size of mesurement area. To reduce this effect, a window function has been proposed and its effect on the measurement of sound absorbing material property has been studied as well. The reflection coefficient obtained by this method is compared with those obtained from other methods; 2-microphone method in a duct and an expirical equation of which determines the characteristic impedance .rho.c and propagation constant k of a material from flow resistance information.formation.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.4
• /
• pp.182-188
• /
• 2014

When the windowed DFT algorithm is applied in harmonic measurements, the problem of initial-phase sensitivity will be encountered, this has an effect on harmonic amplitude accuracy. In this paper, the origin of initial-phase sensitivity is analyzed and the main factors that influence the level of initial-phase sensitivity are demonstrated. A method of reducing initial-phase sensitivity is proposed to increase the stability of harmonic measurements. We found that initial-phase sensitivity is determined by the side lobe peak level of the window functions when synchronous deviation is fixed. In addition, increasing the length of the time recorded can be used to remove initial-phase sensitivity. The correctness and validity of our conclusions have been confirmed through numerical results and field tests.

• IE interfaces
• /
• v.4 no.1
• /
• pp.63-69
• /
• 1991

In this paper, the Go-Back-N ARQ protocol with decoding in communication network is considered. The time delay and throughput are respectively analyzed as a function of window size and decoding time out. Packets arrive continuously at the decoder, and are stored in a buffer if the decoder is busy upon its arrival. The decoder devotes no more than a time-out period of predetermined length to the decoding of any single packet. If packet decoding is completed within that period, the packet leaves the system. Otherwise, it is retransimitted and its decoding starts anew. The time delay and throughput are obtained using recursive formula and difference equation. An appropriate time out and window size that satisfies the grade of service can be determined.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.846-850
• /
• 2004

The aim of this research is to bring fish-file that we have worked to place we want worked in flsh and to design Active container that removed window frame in web like general movie player. It being low price, Anyone using, we intend to design container which removed window frame by processing background of function.