• 수산해양기술연구
• /
• 제36권4호
• /
• pp.347-353
• /
• 2000

The construction and ability of CAE program are presented. The merit and ability of MATLAB which is widely using in the field of recently engineering and natural science are also introduced. Also, analysis program of frame structure used the MATLAB language which is divide in 4th generation language is presented. In this paper, the proposed program using MATLB language to be based upon the composition of general CAE program is composed to preprocess, solver and post-process procedure. And it is able to carried out the static and eigenvalue analysis of truss structure and two dimensional frame structure. Also, for the sample pre-processing and post-processing, it is used the characteristic of input window and plot window to be made of the various GUI function. Each finite elements to be required for analysis is formulated by the Galerkin's method, as a kind of weighted residual method. For check of the results of calculation for program used in this paper, the results to be calculated using program to be developed by the author was compared with its of ANSYS code for general structural analysis about two dimensional truss and frame structure.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.69-75
• /
• 2017

Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.166-172
• /
• 1994

This paper presents an image processing method for two dimensional position measurement of a floating structure. This method is based on image processing technique using concept of window and threshold processing to track the target object. The experimental results for position measurement of the target object in two dimensional water tank demonstrate the validity of this method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.10-11
• /
• 2018

Internal Insulation system is applied to the most apartment building in Korea. However due to the importance of building energy enhanced the interest of the exernal insulation system. The extermal insulation system has better thermal performance because the thermal bridge through the structure are rarely formed. But the thermal bridge around the window decrease the thermal performance of the envelope system. Therefore the technology for reducing the thermal bridge around window improves energy efficiency of the building. In order to this it is necessary to minimize the thermal bridge around window of building. In this study it is aimed to minimize the thermal bridge around the window of building. It was confirmed that the use of thermal bridge barrier imporved the heat transfer rate by 64% or more and the condensation reduction phenomenon by 42% or more compared with the exist technology. These thermal bridge barrier will be used as the main technology to improve the energy efficiency of building.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.75-77
• /
• 2014

Using sealant for window installation is sealing the gap between the window frame and outer wall (such as concrete). A sealant serves to prevent external environmental impacts such as moisture, rain, sand, and dust entering inside of the building and make the building durable. In order to fulfill basic jointing function of sealing, at least 6 mm joint gap between two bonding surfaces are required. Also, adhesion performance between sealant and surfaces and the compatibility with other building materials are required to check before installation. In general, 2 part polyurethane sealant and 1 part silicone sealant are most common materials for sealing the joint of window. In this study, adhesion performances of those two generic sealants reflecting actual application conditions and the compatibility evaluations with other building materials are conducted to propose proper window installation procedures.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.54-57
• /
• 2000

In this paper, we propose a new interpolation method by using the motion between two moving image frames. In the proposed method, the movement is detected by using neighborhood pixels of target pixel in the past frame and the present frame. Then, H-shaped pseudomedian filter (below HPMED) is used for the still part of the image and Delta-shaped interpolation filter (below $\Delta$-shaped) for used in the moving part of the image. We detect the movement by comparing the differences between pixels in 4${\times}$5 window of the past frame and the present frame; the difference has a critical value. We simultaneously accomplish checking PSNR(peak signal noise ratio) and subjective assessment that is placed the focus on edge characteristic for assessment of result in computer simulation. The results show that the proposed adaptive method is better than the conventional methods.

• 한국음향학회지
• /
• 제22권8호
• /
• pp.717-726
• /
• 2003

본 논문은 2.4 kbps 하모닉-CELP 부호화기를 위한 피치 검출기의 설계 방법과 전이 시점을 검출하고 그 값을 기준으로 유/무성음 변환 구간에 대한 합성 윈도우를 달리하여 효과적인 파형 보간이 이루어지도록 하기 위한 방법을 제안하였다. 하모닉-CELP 부호화기에서 유성음 구간은 과거와 현재 프레임의 표준 파형을 보간하여 이루어지므로 전이 구간에서 피치 주기가 반으로 줄거나 두 배로 예측되어질 경우, 피치주기의 심한 변화량에 의해 파형 왜곡 및 프레임 경계에서의 불연속을 발생시킨다. 또한 하모닉 합성을 할 때 삼각 윈도우에 의한 중첩-합산 (overlap-add) 방법을 사용하기 때문에 전이 구간에서 유성음 구간의 신호가 순간적인 증가 (감소)를 할 경우 삼각 윈도우의 영향으로 합성 여기 신호가 선형 증가 (감소) 하는 단점이 있다. 우선 피치 검출기의 설계는 정확한 피치의 검출을 하되 피치 더블링에 의한 프레임 불연속성을 막기 위해 1차 혼성 검색법을 사용하였으며, ACF에 의한 2차 검색으로 피치의 정확도를 높였다. 그리고 삼각 윈도우에 의해 합성 파형이 선형 증가하던 문제는 웨이블렛에 의해 검출된 GCI를 이용하여 전이 시점을 검출한 후, 그 값을 기준으로 사다리꼴 윈도우 설정을 하여 해결하였다. 실험 결과 파형 보간 코더에서 가장 문제가 되었던 피치 더블링이 사라졌으며, 피치 검색 오차율은 ACF 검출법에 비해 5.4% 개선되었고 웨이블렛에 의한 검출법에 비해 2.66% 개선되었다. 전이 구간에서의 MOS값은 0.13 향상되었다.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3108-3115
• /
• 1999

Frame relay needs UPC function for the multiplexed logical connections to prevent malicious user traffic from incoming to network, to guarantee the QoS of conformed user traffic, and to protect the normal operation of network system. On the FR/ATM interworking in ATM networks, the UPC may be conducted either by cell-based ATM UPC or frame-based FR UPC. Frames come into and traverse ATm networks by segmentation to ATM cells. Of course, FR QoS should be guaranteed in spite of segmentation and reassembly in ATM networks. In this paper, we compared the QoS of cell-based ATM UPC and frame-based FR UPC in terms of analysis and simulation in case of ingress of excess traffic over negotiated traffic parameters at user-to-network interface. Also we studied frame-based UPC schemes including window-based FR UPC and frame-based VSA which is an ATM UPC algorithm recommended by ITU-T. We described introductions to frame relay including frame structure and FR/ATM interworking, FR traffic parameters and their relationship, comparison of FR QoS between frame-based FR UPC and cell-based ATM UPC, comparison of FR UPC schemes, necessities of egress traffic control, and conclusions.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.820-827
• /
• 2011

Recently, noise has been regarded as one of the most notorious and frequent environmental pollutions which can be often encountered not only in the living space but also in the industrial site. Studies on physiological and psychological effects of long-term noise exposure to human being have commanded the public interest on noise issues. Since environmental noises such as traffic noise and construction noise is mainly flowed through the open window, it is necessary to develop the active noise control system to reduce it inside the building. Although control speakers and microphones for the noise signal measurement in the control region are essential for the conventional active noise control methods, it is impossible to implement them in the control region in the building environment because the control region is the living quarter and they may hinder activities of the residents. Therefore, we proposed the active window system to reduce the exterior noise flowed through the open window with microphones installed outside the window and control speakers installed at the frame of the window. To confirm the performance of the proposed active window, we carried out the simulation and experiment using active window system with 8 control speakers. Simulation results showed the noticeable noise reduction effect inside the control region within the frequency range without the spatial aliasing. Experimental result showed that the total acoustic potential energy inside the room of the scale model is reduced to about 10dB within the interest of frequency range.

• 한국통신학회논문지
• /
• 제30권10C호
• /
• pp.1017-1026
• /
• 2005

버스트 방식 OFDM 시스템에서의 프레임 동기는 수신된 프레임의 시작 위치를 판단하고, 정확한 FPT-window 위치 추정을 위해 가장 우선적으로 수행되어야 한다. 유효 OFDM 심볼 내의 규정된 반복 패턴 또는 보호 구간의 상관을 이용하는 기존의 일반적인 프레임 동기 방식은 연속적으로 증가하다 감소하는 상관 출력 특성에 의해 정확한 프레임 시작 지점 검출이 어려우며, 수신 신호와 기준 신호 간의 상관 특성을 이용하는 방식은 주파수 옵셋으로 인한 성능 열화를 초래한다. 따라서, 본 논문에서는 프레임 동기 방식으로서 주파수 옵셋에 강인하고 정확한 프레임 시점 검출이 가능한 차동 상관(Differential Correlation) 방식을 기반으로 한 새로운 알고리즘을 제안하였다. 그러나, 일반적인 차동 신호의 상관 결과는 프리앰블의 반복 구조에 의해 다수의 Peak를 가지게 되며 이로 인하여 정확한 프레임 동기의 검출 성능이 열화된다. 본 논문에서는 이러한 차동 검출 방식의 단점을 보완하기 위하여 차동 신호 생성 시 반복되는 동일 패턴 구간의 샘플을 이용하여 단일 상관 Peak를 갖는 알고리즘을 제안한다. 또한 다중경로 페이딩 채널 환경에서 페이딩에 의한 프레임 시작 위치 검출 에러를 줄이기 위하여 신호 전력으로 상관 출력 값을 정규화하는 블록을 도입함으로써 고속 이동 채널 환경에서의 프레임 시작 지점 검출 확률을 높였다.